Korg Forums

If it takes time and learning to get the most out of an instrument with limitations and faults, personally I don't think that means it's a bad instrument. It's just a challenge.

I don't think that ...

Hi, I found the answer to my own question and thought I'd share for anyone else who might need this feature in the future.

It is explained quite well on this page:

http://forum.novationmusic.com ...

Hi, I have searched all over the net to find out if it is possible to:

Bass Station II Midi out to...
Volca Sample Midi in

And control the tempo of the Volca with the tempo of the Bass Station ...

Under Global Parameter on the e2: Set the global MIDI channel to a different number.

Global MIDI channel is where your program changes are sent to. If the slaved device is on another channel, it wo ...

Hi, I have the ES2 set up controlling the Novation Bass Station 2. On the default settings, the 1st pad on the ES2 is the midi track for the BS2, and the BS2 can be easily played using this setting v ...

Ditto, for me it would be a mixer substitution. Just one less thing to bring to a gig.

OK, got it. Tried it both ways and seems that it will be a very handy feature of the electribe!

The global audio thru and the OSC Audio Input are two different things. If you want the signal to just pass through the unit unchanged, use the Audio Thru option. If you want to effect your incoming ...

I can't find anything in the instructions or online. I'm using a Volca Keys audio in and sync out to Volca, and then using the part on Electribe Sampler "Audio in Mono". It seems that the ...

Yes. No issues with mine. I'd start with a fresh all samples file and see if that helps.

Sorry, what do you mean by an "all samples file"?

Hi all,

I understand the loop feature for loop samples and how it works, but is there really no way to simply choose any sample and instantly loop it like on the volca sample? I mean just a simpl ...

Hi all,

I understand the loop feature for loop samples and how it works, but is there really no way to simply choose any sample and instantly loop it like on the volca sample? I mean just a simpl ...

One more thing you could try - the start point knob of the electribe turns into an additional gain knob when the Audio In osc is chosen. Try using this to get some more boost out of it. So first you ...

I think I forgot a crucial step. In the sampler's menus (I believe it's in the Global parameters menu) you can turn the Audio In on or off. I think it defaults to off. Check that out because I thin ...

Thanks, but may I ask why is a mixer necessary? Is it because the output from the microphone is too low for the electribe to register sound input?

OK, so first I bought an XLR to 3.5mm adapter, and tried to record with my dynamic mic, I'm not sure if it was an impedance issue or what but, no sound.

So then, I returned that and bought a comput ...