View previous topic :: View next topic |
Author |
Message |
Timo Platinum Member
Joined: 24 Jan 2002 Posts: 3109 Location: Kaoss central, England
|
Posted: Mon Jun 25, 2007 10:26 pm Post subject: |
|
|
meatballfulton wrote: |
If I have to apply an envelope to get it to oscillate without a signal that's not too good |
That's the same with all of the digital virtual-analogues I've tried. The Virus is exactly the same, you need to keep feeding an input (by pressing a key, and having an input signal such as an osc) along with the usual filter + resonance settings to get it to self-oscillate, sonically. _________________ [Free Moss Set For All Workstations With Moss Expansion]
[Infekted.org - Original Access Virus Forum & Community]
Trinity V3 PBS | Radias KB | Virus TI Snow | Virus Indigo 1 | 505 Groovebox |
|
Back to top |
|
|
Daz Retired
Joined: 01 Jan 2002 Posts: 10829
|
Posted: Tue Jun 26, 2007 12:46 am Post subject: |
|
|
I don't think the Radias Filter(s) will self resonate as some real analog synths are able to when there has been and is NO input from the oscillators/noise gen etc. (i.e. totally unsolicited, spontaneous self resonance)
As I understand it that behaviour occurs because there is in reality ALWAYS a signal present at the input of the filters on some of ye olde analog synths; a little leakage from the oscillator circuits or some other electrical noise. That is enough to trigger the filter to resonate when the filter resonance is set to a very high value. Very high resonance means amplify a particular frequency range a lot ... so even a tiny inaudible amount of noise with the appropriate frequency contained in it will be amplified and become audible.
In a digital synth, when the oscillators and noise gen aren't singing, the input to the filter is just a whole bunch of zero's. Pure silence ... there are no noisy 0's So the filter really is getting no input to work with and hence won't just start resonating on it's own.
So the alternative is to send in an impulse, a brief moment of noise to trigger the filter to self resonate.
For example ... if you start from an Initialized Program and edit Timbre1 like so :
1) Turn the volume of all the OSC's to 0
2) Use EG3/VPatch1 to send a very short (attack=0 decay=0!! sustain =0) burst of noise into Filter1
3) Set the Resonance on Filter 1 to 127 and "tune" the filter by setting Filter Cutoff and Keytracking
Filter 1 will self-resonate (in the sense that it is making a sound with no continual audio input source). You can play the filter using the keyboard, as a pitched instrument and attract pets from around the neighbourhood with some very high frequency notes
Here's a screen grab from the Radias editor after making the above changes, showing the values I worked with :
Daz. |
|
Back to top |
|
|
meatballfulton Senior Member
Joined: 20 Jun 2007 Posts: 351
|
Posted: Tue Jun 26, 2007 12:45 pm Post subject: |
|
|
Timo wrote: | That's the same with all of the digital virtual-analogues I've tried. |
The one I currently use...Yamaha PLG150-AN...does act like real analog, the filter will self oscillate.
Daz,
I'd expect your solution would do the trick. _________________ I sing the body electric |
|
Back to top |
|
|
Daz Retired
Joined: 01 Jan 2002 Posts: 10829
|
Posted: Tue Jun 26, 2007 5:28 pm Post subject: |
|
|
Daz wrote: | As I understand it ... blah ... blah ... |
Am I understanding this correctly ? It's not something I fully understand the mechanics of, it has to be said.
Daz. |
|
Back to top |
|
|
Khazul Full Member
Joined: 03 May 2006 Posts: 136 Location: Reading, UK
|
Posted: Tue Jun 26, 2007 7:10 pm Post subject: Re: Newbie Q: Radias doing Vintage Analog Sounds |
|
|
If your look for a VA that can sound more like a traditional analog, then I wouldnt recommend the radias - its filters just aint bitey enough, and TBH its oscs are just a little bit on the thin side.
Some others
Nord G2 - seems to do a reasonable job on both osc and filters, but not played with it much.
Nord Lead 3 - not played much, but seems to manage an analog sounds - cant really usefully comment on oscs and filters beyond - 'not bad'
Virus B/C/TI - oscs just a little bit thin, but filters have alot of character and so can be very passable depending on key range.
Alesis Fusion - very good oscs, filters not quite characterful enough - better than average, let down by only one filter.
Alesis Ion - as Fusion, though not sure basics osc sound is as good, more filter options - can be quite convincing at times.
Alesis Andromeda of course an excellent choice - if you want analog - get analog -can be hard to get hold of. Personally I've never been even slightly tempted by a moog little phatty, but could be good for you - just a mono tho. _________________
--- The Studio & Noises ----- Adam G @ MySpace --- |
|
Back to top |
|
|
chinard Platinum Member
Joined: 03 Jun 2003 Posts: 824 Location: Racoon City
|
Posted: Tue Jun 26, 2007 10:40 pm Post subject: |
|
|
ok, one thing to pay attention to here if you are trying to get your filters to self-oscilate is the signal path.
In most synths including radias, the path is VCO => VCF => VCA
This means that even though your filters are oscillating you wont be hearing it because the envelope in the VCA is not letting sound through if there is no keys pressed.
what you need to do to hear it is to turn the other oscilator's mix down to 0, crank the resonance, set filter keyboard track to 100% and try playing the keyboard. if you get things set just right you should be producing a nice sine-tone from the filters. _________________ http://www.delicamusic.com
http://www.soundclick.com/cathodehum |
|
Back to top |
|
|
meatballfulton Senior Member
Joined: 20 Jun 2007 Posts: 351
|
Posted: Wed Jun 27, 2007 1:58 pm Post subject: |
|
|
OK a couple of things in reply to the last few posts:
-- I have owned quite a bit of analog, some vintage and some modern. I just sold off a big synthesizers.com modular system (patch cords and all) last summer when I was losing my job and had bills to pay. I don't expect a VA to sound just like analog, I would like one that behaves close though which is why I started poking around with the Radias filters. I'm a hobbyist and a Radias rack is far cheaper than real analog and has many goodies not available in analog (or at least not without $$$$$$$$)...the FX, sequencers, full MIDI control of all knobs, etc. plus it's in tune as soon as you turn it on
-- Daz, your understanding is more or less correct but in analog filters I'm not really sure whether it's residual noise or not that triggers the oscillation. When filters go in to self-oscillation they are in an unstable feedback loop. If there is no gain limiting in the circuit the filter output will just continue to rise until it hits the power supply rails and clips. I once owned a PAiA analog synth that did this, making really ugly squawks at high resonance because of clipping. I finally soldered in some zener diodes to make a crude limiter and the filters became controllable. You can hear an example of that here. On some analog filters, the design itself limits how high the resonance gets so it won't self oscillate. There are many vintage analogs (esp. those with 2-pole filters) that will not self oscillate.
-- Yes, I made sure the amp was wide open while I was messing with the filters.
Anyway, enough about the filters...beaten that one to death _________________ I sing the body electric |
|
Back to top |
|
|
nemmo Senior Member
Joined: 20 Aug 2006 Posts: 309
|
Posted: Fri Jun 29, 2007 7:01 am Post subject: |
|
|
I think it sounds pretty analogue. |
|
Back to top |
|
|
dulcimoo
Joined: 22 Jul 2007 Posts: 19 Location: CA
|
Posted: Sun Sep 02, 2007 1:26 pm Post subject: Self Osc... |
|
|
...add just a hair bit of noise if you need to make the filters self osc. My filters do so and very sweetly too. |
|
Back to top |
|
|
gdh Senior Member
Joined: 04 Mar 2006 Posts: 288 Location: NW Toronto, Ontario
|
Posted: Sun Sep 02, 2007 1:52 pm Post subject: |
|
|
I hate you guys, I hate you guys, I hate you guys!!!! ok so who is going to buy me a new monitor, I decided to get the Voyager, MiniD and radias to self osc. all at once. Geez my monitor sure didn't like it, glad I have a warranty. |
|
Back to top |
|
|
meatballfulton Senior Member
Joined: 20 Jun 2007 Posts: 351
|
Posted: Tue Sep 25, 2007 8:29 pm Post subject: |
|
|
Just want to thank everyone here for all their input.
After a lot of investigation and playing around with a demo at GC a few times I picked up a Radias-R today. _________________ I sing the body electric |
|
Back to top |
|
|
Khazul Full Member
Joined: 03 May 2006 Posts: 136 Location: Reading, UK
|
|
Back to top |
|
|
nemmo Senior Member
Joined: 20 Aug 2006 Posts: 309
|
Posted: Wed Sep 26, 2007 6:04 am Post subject: |
|
|
Nice. |
|
Back to top |
|
|
|