View previous topic :: View next topic |
Author |
Message |
brumbynw
Joined: 01 Oct 2007 Posts: 6
|
Posted: Tue Feb 12, 2008 5:28 am Post subject: How do I use outputs 3 and 4 on the X2? |
|
|
I would like to hear just the regular signal out of outputs 3 and 4 since my main left output is starting to go. Is this possible?
-Brumby |
|
Back to top |
|
|
Gargamel314 Platinum Member
Joined: 25 Dec 2007 Posts: 1147 Location: Carneys Point, NJ
|
Posted: Thu Feb 14, 2008 4:58 am Post subject: |
|
|
I have an N364 which has a similar configuration. Outputs 3 and 4 were designed to be used with external effects processors - any sound routed through those buses will have NO Master effects applied to them. Unfortunately, you can't use these as a replacement for outputs 1 and 2 the same way. You'd have to take your X2 to an Authorized Korg Dealer to get your faulty output repaired. |
|
Back to top |
|
|
brumbynw
Joined: 01 Oct 2007 Posts: 6
|
Posted: Thu Feb 14, 2008 5:47 am Post subject: Thank you - |
|
|
After reading the manual way too much I have confirmed that what you said is exactly true. What a waste of two outputs.
I really appreciate your reply to my post Gargamel314.
Thanks,
Brumby |
|
Back to top |
|
|
|