|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
yoodooright
Joined: 06 Aug 2008 Posts: 11
|
Posted: Tue Sep 16, 2008 12:14 pm Post subject: Microkorg Midi sync setup help needed! |
|
|
Not entirely a Microkorg dedicated question this but as a lot of you are using the Microkorg intergrated into a larger system i thought it might be worth asking anyway.
I'm basically in the process of putting together my live set up and aside from the individual bits of hardware on my list, i need to know what else i might need to tempo sync it all together and check im not missing anything (there's a budget involved you see!)
Korg Electribe EM1 (Midi In, Midi Out, Midi Thru)
Roland CR78 Analogue drum machine (Ext. Clock in)
Kenton Pro Mk II Midi to CV convertor
MicroKorg (Midi In, Midi Out, Midi Thru)
Roland SP404 (Midi In)
Lots of leads!
My idea is to use the Electribe as the Master sequencer driving the CR78's tempo via a Kenton Midi to CV convertor (as described here: http://www.submodern.com/slowburn/?p=608)
but is it possible to daisy chain the Microkorg and SP404 into the equation and have there tempos sync to the Electribe/Cr78 set-up also considering:
1) The Kenton Convertor only has 1 midi in and 1 midi thru
2) The SP404 only has midi in
Or do i need to buy some kind of multi midi interface?? Any help would be great!
YDR |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|