| View previous topic :: View next topic |
| Author |
Message |
Acid
Joined: 08 Jan 2011
Posts: 26
|
 Posted: Sat Jan 08, 2011 1:15 pm Post subject: Bass Guitar cab & head |
 |
|
Can I use my Bass Guitar cabinet and head as a temporary speaker system?
I understand it is not the same as a set of dry studio speakers but I just want to get by for now without blowing my new EMX1 SD
I have a couple of cabs. 1 15" mesa portable cab and a road ready 2x15 cab. The 2x15 has a 60-6000Hz frequency speaker and a ? 30 3000Hz speaker. Both EV. Could I run the 1/4" jack directly to the speaker or do I need to plug into the input jack on the Amp. It's a Mesa/Boogie 400w + head (12x5881 tubes)
_________________
Korg Kaos Pro
AcidLab Bassline
Maschine
Roland TB 303 - needs buttons
I need more Korg hardware!!  |
|
| Back to top |
|
 |
xmlguy
Platinum Member
Joined: 26 Nov 2007
Posts: 3605
|
| Posted: Sat Jan 08, 2011 7:42 pm Post subject: |
|
|
Speakers require an audio power amplifier of some kind. The EMX doesn't have one. It can drive headphones, at most.
You need to send the Electribe output to the input of an Amp(lifier), of some kind. |
|
| Back to top |
|
|
Acid
Joined: 08 Jan 2011
Posts: 26
|
| Posted: Sat Jan 08, 2011 11:45 pm Post subject: |
|
|
So it's safe to send the output from the EMX1 SD to the Mesa 400w input, the same way I plug my bass guitar in? That sounds logical but I am just wanting to make sure.
Another thing; being that the EMX1 SD and ESX1 SD only have 50mb of FLASH ram, does this put a crippling limitation on the creative song writing process as well as doing live shows?
_________________
Korg Kaos Pro
AcidLab Bassline
Maschine
Roland TB 303 - needs buttons
I need more Korg hardware!! |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
