Korg Forums Forum Index Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

MicroKorgXL with MPC 5000... NEED HELP!!

 
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg X-50 / microX
View previous topic :: View next topic  
Author Message
ProfessorDTN



Joined: 05 Mar 2011
Posts: 1

PostPosted: Sat Mar 05, 2011 8:45 pm    Post subject: MicroKorgXL with MPC 5000... NEED HELP!! Reply with quote

I have a MPC5K and am trying to hook the MicroKorg to it. I cant get the sounds on the Korg to save on the MPC. Im using the headphone jack on the mpc to hear the project. But the MPC makes the Korg follow its programs. So the korg plays what the mpc has loaded on its pads. But if i take the headphone jak out and plug into Korg its playing its own sounds but will record sample of what the mpc has on its pads instead of what im hearing. and i also cant get the korg to sync for the recording process of the sequence. I think i have tried everything i can think of. If anyone has any ideas at all i would like to hear them. Thanks. Drew
Back to top
View user's profile Send private message
robbinhood
Platinum Member


Joined: 06 Jan 2010
Posts: 995
Location: Los Angeles, California

PostPosted: Sun Mar 06, 2011 1:46 am    Post subject: Reply with quote

Hmm Im gonna assume that you are trying to not just control the MPC through the microkorg via midi, but also want to sample the microkorg into the MPC for pad use?
Okay if im gonna assume that, even though ive never used an MPC, i would think that first off, both would need to be in a different midi channel, to prevent them sonicly playing at once. So you can have a program on your microkorg that plays on midi channel 2 for example, wich is what your MPC is set to, and the microkorg will not sound.

So my connections would be:
MK channel 1 Midi out - MPC Channel 2
Audio Output from MK to MPC

and if i wanted to use sounds sampled in the MPC through microkorg.
make a program (patch, setup, whatever you wanna call it) with midi being transmitted on channel two, and having its internal sounds off (turning the OSC's all the way down)
If i wanted to use the MPC to play microkorg sounds, then i would directly sample it through audio. im sure you know how to do that.
Also, see if your MPC has an Audio through feature, like having the audio input into the MPC always running through the main outputs whether sampling or not.

hope that helps?
_________________
weeeee

Current gear: Korg KRONOS 61, Hackintosh w/ i7 + 16G RAM, MOTU 828 MKIII Firewire Interface, Rhodes MKI

Past gear: Korg Triton Extreme 61&76 (maxed), Korg Radias, Kurzweil Micropiano, Korg Triton classic ProX, Korg karma, M Audio Key station + logic, korg KMX-122, Tascam MM-1, Korg DRV-2000
Back to top
View user's profile Send private message Send e-mail Visit poster's website AIM Address
xmlguy
Platinum Member


Joined: 26 Nov 2007
Posts: 3487

PostPosted: Sun Mar 06, 2011 4:47 am    Post subject: Re: MicroKorgXL with MPC 5000... NEED HELP!! Reply with quote

ProfessorDTN wrote:
I have a MPC5K and am trying to hook the MicroKorg to it. I cant get the sounds on the Korg to save on the MPC. Im using the headphone jack on the mpc to hear the project. But the MPC makes the Korg follow its programs. So the korg plays what the mpc has loaded on its pads. But if i take the headphone jak out and plug into Korg its playing its own sounds but will record sample of what the mpc has on its pads instead of what im hearing. and i also cant get the korg to sync for the recording process of the sequence. I think i have tried everything i can think of. If anyone has any ideas at all i would like to hear them. Thanks. Drew


The problem seems to be that you don't understand how MPC5K and MK work on their own, much less together. I suggest that you simplify the scenario to learn how each one works, one step at a time.

For example, on the MPC, figure out how to samply anything you play from the microkorg to a pad, so that you can play back the sample by hitting the pad. Don't use midi connections at all. Just hook the L+R audio outputs of the MK to the audio inputs of the MPC.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg X-50 / microX All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group