View previous topic :: View next topic |
Author |
Message |
fugmann
Joined: 25 Feb 2011 Posts: 36
|
Posted: Mon Sep 19, 2011 4:23 pm Post subject: HELP NEEDED - rebuilding the M3 OS from scratch |
|
|
Hi guys,
I still have some issues with my lovely M3. Several months ago I updated to OS ver. 2.04 - however something went wrong. I know that for sure.
When I try to overwrite the last update from ver. 2.0 to 2.04, it says: "latest OS already installed" and I am not allowed to overwrite data.
My issues are:
1) some sound are silent
2) I cant activate all menues on the screen
3) I can't sample
I have purchased a new SD clean card. Is it possible to install it in the M3 and then start installing OS ver 1, version 2 Expanded and 2.04 etc?
Your help is very much appreciated
For your info, my M3 is with 61 keys, the "little" original SD-card, Radias exp. and M256 RAM expansion
Thank you in advance!!!
Henrik _________________ Best regards
Last edited by fugmann on Tue Sep 20, 2011 2:40 pm; edited 2 times in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
iixorbiusii Full Member
![](images/avatars/gallery/YaBB/pong.gif)
Joined: 30 Aug 2008 Posts: 198
|
Posted: Tue Sep 20, 2011 12:21 am Post subject: |
|
|
Hi there,
Regarding some of the sounds being 'silent' - maybe these are the ones using the 4 Korg sound packs? I forget what they're called as I hardly use the M3 now (only due to lack of time, not lack of interest), but they load some of the piano, brass, reed instruments etc on start-up. EXM's or something like this? If you haven't set the M3 to load them, then patches using these sounds will be silent.
I also know that it is possible to re-load the O/S onto the internal SD card, without having to open the M3 up. There is a special 'hidden' button sequence which gives direct access to the internal SD contents - your M3 shows up like an external SD device on your PC. Hopefully someone here can give you the instructions - again, I can't remember but have done this in the past.
Good luck. _________________ CURRENT GEAR: A yellowing Casio PT-80, 4 leaking batteries and some broken headphones.
WISHLIST: A PSU and some different headphones. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
fugmann
Joined: 25 Feb 2011 Posts: 36
|
Posted: Tue Sep 20, 2011 1:23 pm Post subject: |
|
|
iixorbiusii wrote: | Hi there,
I also know that it is possible to re-load the O/S onto the internal SD card, without having to open the M3 up. There is a special 'hidden' button sequence which gives direct access to the internal SD contents - your M3 shows up like an external SD device on your PC. Hopefully someone here can give you the instructions - again, I can't remember but have done this in the past.
Good luck. |
Someone, please let me know how this is done.... _________________ Best regards
Last edited by fugmann on Tue Sep 20, 2011 2:42 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
RI Producer Junior Member
![](images/avatars/17907812004b756881cf55c.gif)
Joined: 08 Dec 2009 Posts: 82 Location: CT
|
Posted: Tue Sep 20, 2011 2:03 pm Post subject: |
|
|
Ive read some where you dont want to go back with OS's it could cause PERMANENT DAMAGE to your M3. I would do a factory Reset, its much safer.
the steps are:
1. Turn off.
2. Hold down Reset Controllers & track buttons 1&2.
3. Turn on while holding them down. _________________ http://www.reverbnation.com/Risamaru |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
fugmann
Joined: 25 Feb 2011 Posts: 36
|
Posted: Tue Sep 20, 2011 2:12 pm Post subject: |
|
|
RI Producer wrote: | Ive read some where you dont want to go back with OS's it could cause PERMANENT DAMAGE to your M3. I would do a factory Reset, its much safer.
the steps are:
1. Turn off.
2. Hold down Reset Controllers & track buttons 1&2.
3. Turn on while holding them down. |
I just tried to do so - now all sounds/presets are erased All patches are named InitCombi XXX or InitProgram XXX and sound like a piano - what shall I do next, please? _________________ Best regards |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Jon Lord Senior Member
![](images/avatars/5229145464d924b8d52cd8.gif)
Joined: 07 Sep 2007 Posts: 452 Location: Sweden
|
Posted: Tue Sep 20, 2011 2:48 pm Post subject: |
|
|
fugmann wrote: | iixorbiusii wrote: | Hi there,
I also know that it is possible to re-load the O/S onto the internal SD card, without having to open the M3 up. There is a special 'hidden' button sequence which gives direct access to the internal SD contents - your M3 shows up like an external SD device on your PC. Hopefully someone here can give you the instructions - again, I can't remember but have done this in the past.
Good luck. |
Someone, please let me know how this is done.... | If i remember correctly you should hold down SEQ+EXIT when booting up, then if you have connected it to your PC it should turn up as a CD card on it.
Disclaimer: on your own risc. _________________
- Download & share Korg keyboard patches for free.
Korg M3-73 (Radias Exb & Warwick "RC 21728 B" case), Clavia Nord Electro 3.
[On Hold]: Elka MK-88. [Sold]: Roland XP-30, Access Virus C
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
fugmann
Joined: 25 Feb 2011 Posts: 36
|
Posted: Tue Sep 20, 2011 3:26 pm Post subject: |
|
|
Thanks John,
I this procedure works I need to know what files I should upload to the SD-card? Someone who can fill in, please? _________________ Best regards |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
gurn Full Member
![](images/avatars/13282980634d83651dc630e.jpg)
Joined: 15 Nov 2010 Posts: 198
|
Posted: Tue Sep 20, 2011 3:38 pm Post subject: |
|
|
fugmann wrote: | RI Producer wrote: | Ive read some where you dont want to go back with OS's it could cause PERMANENT DAMAGE to your M3. I would do a factory Reset, its much safer.
the steps are:
1. Turn off.
2. Hold down Reset Controllers & track buttons 1&2.
3. Turn on while holding them down. |
I just tried to do so - now all sounds/presets are erased All patches are named InitCombi XXX or InitProgram XXX and sound like a piano - what shall I do next, please? |
Now you load all the previous sounds back onto your M3.
Here are some of them.
http://www.korgforums.com/?show=1
http://korg.com/Product.aspx?pd=280
I can email you my PCG files if you want. Other users probably have more complete sets. _________________ *********
Korg Kronos-88, Korg M3-88, Kawai K1r (alive), K-1 (dead)
PRS SE Custom 22 Semi-hollow, Fender Jazzmaster, 2015 Gibson Les Paul Special, acoustics |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
fugmann
Joined: 25 Feb 2011 Posts: 36
|
Posted: Tue Sep 20, 2011 3:47 pm Post subject: |
|
|
gurn wrote: | fugmann wrote: | RI Producer wrote: | Ive read some where you dont want to go back with OS's it could cause PERMANENT DAMAGE to your M3. I would do a factory Reset, its much safer.
the steps are:
1. Turn off.
2. Hold down Reset Controllers & track buttons 1&2.
3. Turn on while holding them down. |
I just tried to do so - now all sounds/presets are erased All patches are named InitCombi XXX or InitProgram XXX and sound like a piano - what shall I do next, please? |
Now you load all the previous sounds back onto your M3.
Here are some of them.
http://www.korgforums.com/?show=1
http://korg.com/Product.aspx?pd=280
I can email you my PCG files if you want. Other users probably have more complete sets. |
Hmm - I guess that it should be lots of BIN-files, right? Please keep in mind that the files on the internal SD-card are not similar to the KEP-files that are stores on the USB-stick.
I wish that there is someone out there with the same M3 configuration as me who can send me an exact copy of the content of his/hers SD-card. _________________ Best regards |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
fugmann
Joined: 25 Feb 2011 Posts: 36
|
Posted: Tue Sep 20, 2011 5:46 pm Post subject: Re: HELP NEEDED - rebuilding the M3 OS from scratch |
|
|
fugmann wrote: | Hi guys,
I still have some issues with my lovely M3. Several months ago I updated to OS ver. 2.04 - however something went wrong. I know that for sure.
When I try to overwrite the last update from ver. 2.0 to 2.04, it says: "latest OS already installed" and I am not allowed to overwrite data.
My issues are:
1) some sound are silent
2) I cant activate some of the menues on the screen
3) I can't sample
I have purchased a new SD clean card. Is it possible to install it in the M3 and then start installing OS ver 1, version 2 Expanded and 2.04 etc?
Your help is very much appreciated
For your info, my M3 is with 61 keys, the "little" original SD-card, Radias exp. and M256 RAM expansion
Thank you in advance!!!
Henrik |
_________________ Best regards |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
fugmann
Joined: 25 Feb 2011 Posts: 36
|
Posted: Tue Sep 20, 2011 5:47 pm Post subject: Re: HELP NEEDED - rebuilding the M3 OS from scratch |
|
|
fugmann wrote: | Hi guys,
I still have some issues with my lovely M3. Several months ago I updated to OS ver. 2.04 - however something went wrong. I know that for sure.
When I try to overwrite the last update from ver. 2.0 to 2.04, it says: "latest OS already installed" and I am not allowed to overwrite data.
My issues are:
1) some sound are silent
2) I cant activate some of the menues on the screen
3) I can't sample
I have purchased a new SD clean card. Is it possible to install it in the M3 and then start installing OS ver 1, version 2 Expanded and 2.04 etc?
Your help is very much appreciated
For your info, my M3 is with 61 keys, the "little" original SD-card, Radias exp. and M256 RAM expansion
Thank you in advance!!!
Henrik |
_________________ Best regards |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
fugmann
Joined: 25 Feb 2011 Posts: 36
|
Posted: Tue Sep 20, 2011 5:52 pm Post subject: Re: HELP NEEDED - rebuilding the M3 OS from scratch |
|
|
fugmann wrote: | Hi guys,
I still have some issues with my lovely M3. Several months ago I updated to OS ver. 2.04 - however something went wrong. I know that for sure.
When I try to overwrite the last update from ver. 2.0 to 2.04, it says: "latest OS already installed" and I am not allowed to overwrite data.
My issues are:
1) some sound are silent
2) I cant activate some of the menues on the screen
3) I can't sample
I have purchased a new SD clean card. Is it possible to install it in the M3 and then start installing OS ver 1, version 2 Expanded and 2.04 etc?
Your help is very much appreciated
For your info, my M3 is with 61 keys, the "little" original SD-card, Radias exp. and M256 RAM expansion
Thank you in advance!!!
Henrik |
_________________ Best regards |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
iixorbiusii Full Member
![](images/avatars/gallery/YaBB/pong.gif)
Joined: 30 Aug 2008 Posts: 198
|
Posted: Tue Sep 20, 2011 6:02 pm Post subject: |
|
|
fugmann wrote: | ...
I wish that there is someone out there with the same M3 configuration as me who can send me an exact copy of the content of his/hers SD-card. |
Actually, it would seem I have...(M3 61 with M256 and Radias EXB).
I made a backup of the internal SD about a year ago (version 2.04 I think).
Please PM me with somewhere I can send the image to - I imagine it's a good few hundred MB (not at the PC where it's stored until this evening). _________________ CURRENT GEAR: A yellowing Casio PT-80, 4 leaking batteries and some broken headphones.
WISHLIST: A PSU and some different headphones. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
iixorbiusii Full Member
![](images/avatars/gallery/YaBB/pong.gif)
Joined: 30 Aug 2008 Posts: 198
|
Posted: Tue Sep 20, 2011 7:34 pm Post subject: |
|
|
fugmann wrote: |
I just tried to do so - now all sounds/presets are erased All patches are named InitCombi XXX or InitProgram XXX and sound like a piano - what shall I do next, please? |
Have you tried re-loading the factory patches? I forget how to do this, but it can be done from within the M3 itself. I think start with 'Global' menu.
I'll take the M3 out of storage later and fire it up to have a look how to do this and let you know.
EDIT:
OK - I have just checked.
1)Click 'Global'
2) On the screen (top right) press the "v" arrow next to "BASIC"
3) Select "load Pre-load / Demo Data" and then choose the option you want. I believe the first option "All..." will give you what you want.
If this still doesn't work, then we'll need to try a complete internal SD reload. I'll PM you on this semi-risky procedure (rather avoid it if possible). _________________ CURRENT GEAR: A yellowing Casio PT-80, 4 leaking batteries and some broken headphones.
WISHLIST: A PSU and some different headphones. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
fugmann
Joined: 25 Feb 2011 Posts: 36
|
Posted: Wed Sep 21, 2011 4:25 am Post subject: |
|
|
Thanks, however one of my problems is that I can't activate the "v" menu on the screen in the upper right corner
I am very certain that it is just a matter of software/OS - not some hardware related issues. The question is:
Can this be fixed by making sure that the SD-card and the USB-stick are loaded with the correct files? Are there any other issues that I should keep in mind? _________________ Best regards |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|