|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
roboo
Joined: 08 Oct 2011 Posts: 6
|
Posted: Sat Oct 08, 2011 4:02 pm Post subject: Problems loading a pattern |
|
|
for example i choose pattern 2 (is 16 bars length and is empty) after i choose load a pattern 2 in pattern 3 (in the correct bank), and then i play pattern 3 and.... surprise!!! sometimes load other different pattern and sometimes load pattern 2 but only 4 bars!!!!.......... please HELP!!!! i show all in pattern and in sample and in global and......i think is all ok? |
|
Back to top |
|
|
Telengard Full Member
Joined: 07 Aug 2011 Posts: 237
|
Posted: Sun Oct 09, 2011 4:17 am Post subject: |
|
|
Are you using the microSAMPLER software on your PC/MAC or are you trying to move patterns from the microSAMPLER itself? Not sure I understand what you are trying to do. _________________ Korg Gear: Electribe 2, microSAMPLER, Mini Kaoss Pad 2, monotron, nanoKey, nanoKontrol2, nanoPad2
Korg Apps: iMS-20, iElectribe, iKaossilator
Old Korg Gear: Electribe EMX-1SD, monotribe (with MIDI), Kaossilator Pro, KP3, SOS |
|
Back to top |
|
|
roboo
Joined: 08 Oct 2011 Posts: 6
|
Posted: Mon Oct 10, 2011 10:14 am Post subject: |
|
|
Telengard wrote: | Are you using the microSAMPLER software on your PC/MAC or are you trying to move patterns from the microSAMPLER itself? Not sure I understand what you are trying to do. |
im using the microsampler itself!! just only i select pattern 2 and in pattern seq i choose load pattern from bank h (the correct bank) from pattern 1, and microsampler dont load the pattern correctly, pattern 1 is 16 bars and microsampler load pattern 1 but only 4 bars or simple load other differnt pattern,,,,,,, is microsampler error or im i little awkward???,,,, thankx for reply |
|
Back to top |
|
|
roboo
Joined: 08 Oct 2011 Posts: 6
|
Posted: Mon Oct 10, 2011 10:17 am Post subject: |
|
|
Telengard wrote: | Are you using the microSAMPLER software on your PC/MAC or are you trying to move patterns from the microSAMPLER itself? Not sure I understand what you are trying to do. |
yes im trying to move patterns from the microSAMPLER itself.... |
|
Back to top |
|
|
Telengard Full Member
Joined: 07 Aug 2011 Posts: 237
|
Posted: Mon Oct 10, 2011 11:16 am Post subject: |
|
|
I will try it on mine today and see if I get the same results.
-UPDATE:
I can do it on mine without a problem. Examples:
1) I take empty pattern 10 on bank F (It has a length of 4). Load pattern 1 from Bank G (It has a length of 16). Loads fine and shows the proper length of 16. But I don't have the samples loaded from bank G so I don't hear anything or it will play the samples on the keys assigned to bank F. So I load the samples from bank G to bank F and all is good.
2) I take empty pattern 10 on bank G (Length 4). Load pattern 1 from bank G (Same bank. Length 16). Loads fine and plays as expected.
Are you sure the samples are loaded into the bank that goes with the pattern?
Hope that helps you figure out what is going on. _________________ Korg Gear: Electribe 2, microSAMPLER, Mini Kaoss Pad 2, monotron, nanoKey, nanoKontrol2, nanoPad2
Korg Apps: iMS-20, iElectribe, iKaossilator
Old Korg Gear: Electribe EMX-1SD, monotribe (with MIDI), Kaossilator Pro, KP3, SOS |
|
Back to top |
|
|
roboo
Joined: 08 Oct 2011 Posts: 6
|
Posted: Mon Oct 10, 2011 1:51 pm Post subject: |
|
|
Telengard wrote: | I will try it on mine today and see if I get the same results.
-UPDATE:
I can do it on mine without a problem. Examples:
1) I take empty pattern 10 on bank F (It has a length of 4). Load pattern 1 from Bank G (It has a length of 16). Loads fine and shows the proper length of 16. But I don't have the samples loaded from bank G so I don't hear anything or it will play the samples on the keys assigned to bank F. So I load the samples from bank G to bank F and all is good.
2) I take empty pattern 10 on bank G (Length 4). Load pattern 1 from bank G (Same bank. Length 16). Loads fine and plays as expected.
Are you sure the samples are loaded into the bank that goes with the pattern?
Hope that helps you figure out what is going on. |
yes, i did the second one example and still the same problem, loads the pattern with only 4 bars and sometimes other different pattern (yes,, i have the samples and patterns in the same bank) ill still trying and ill wait found the answer.... thanks a lot _________________ http://www.roboomusic.blogspot.com |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|