|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
feedbacker2
Joined: 03 Oct 2011 Posts: 7
|
Posted: Tue Nov 15, 2011 8:00 pm Post subject: two questions |
|
|
1. When I have a sample in the mac editor and I transfer it to the sampler it always arrives as a "loop" is there anyway to make it "one shot" before transferring ,as I tend to then re sample the loop so it can be one shot ?
2.If I transfer a loop to the sampler and then I use "Keyboard Mode" it stretches it across the keyboard as expected .What pitch/note should the sample be so all the keys play the correct notes should the original sample be C3 first ? |
|
Back to top |
|
|
Telengard Full Member
Joined: 07 Aug 2011 Posts: 237
|
Posted: Tue Nov 15, 2011 9:38 pm Post subject: Re: two questions |
|
|
feedbacker2 wrote: | 1. When I have a sample in the mac editor and I transfer it to the sampler it always arrives as a "loop" is there anyway to make it "one shot" before transferring ,as I tend to then re sample the loop so it can be one shot ? |
If you go to the sample you just copied to the MS, you can change the release of the sample to maximum (127 i think) and turn off loop with the button that says loop or in the settings. That will make it a one-shot.
feedbacker2 wrote: | 2.If I transfer a loop to the sampler and then I use "Keyboard Mode" it stretches it across the keyboard as expected .What pitch/note should the sample be so all the keys play the correct notes should the original sample be C3 first ? |
Don't know about this one. I think someone else will have to chime in. _________________ Korg Gear: Electribe 2, microSAMPLER, Mini Kaoss Pad 2, monotron, nanoKey, nanoKontrol2, nanoPad2
Korg Apps: iMS-20, iElectribe, iKaossilator
Old Korg Gear: Electribe EMX-1SD, monotribe (with MIDI), Kaossilator Pro, KP3, SOS |
|
Back to top |
|
|
korakios Junior Member
Joined: 23 Nov 2010 Posts: 59 Location: GREECE
|
Posted: Thu Nov 17, 2011 2:42 pm Post subject: Re: two questions |
|
|
feedbacker2 wrote: |
2.If I transfer a loop to the sampler and then I use "Keyboard Mode" it stretches it across the keyboard as expected .What pitch/note should the sample be so all the keys play the correct notes should the original sample be C3 first ? |
You tweak the pitch in sample mode so that ,in keyboard mode the sample corresponds to the right note |
|
Back to top |
|
|
Re-Member Platinum Member
Joined: 15 Feb 2008 Posts: 657
|
Posted: Thu Nov 17, 2011 6:16 pm Post subject: |
|
|
1. To transfer the sample as One Shot, press the virtual key in the editor which the sample is on, then go to the button that says "LOOP" and switch it to OFF. It's right below the second octave. This changes only that specific sample, so you have to repeat the process for all the keys you want. There's no need to change the release if unless you want to tap the key and have it play with a decay.
2. As long as the sample is in the key of C, it will be pitched correctly. Having it in C1, C2, C3, etc. will vary depending on the type of sample and the octave you want it to be in. _________________ Roland Juno-60, SH-101, TR-606, MC-505, Casio CZ-101, Yamaha DX100, DX11, Kawai R-50e // Korg R3, microSTATION, Monotribe, MS-20 Mini, SQ-1, minilogue, electribe sampler, Volca series: Bass, Keys, Beats, Sample, FM, Kick, Moog Theremin |
|
Back to top |
|
|
Telengard Full Member
Joined: 07 Aug 2011 Posts: 237
|
Posted: Fri Nov 18, 2011 2:32 pm Post subject: |
|
|
Re-Member wrote: | There's no need to change the release if unless you want to tap the key and have it play with a decay. |
But you do have to make sure you have release at 127 and decay at 127 if you want it to play all the way to the end after releasing the key. So if you have release at say 63 and just barely tap the key it will start releasing right away so you may not hear the entire sample if it is long. If it is at 127 then it will always play all the way through.
Check the manual on pages 29-30. _________________ Korg Gear: Electribe 2, microSAMPLER, Mini Kaoss Pad 2, monotron, nanoKey, nanoKontrol2, nanoPad2
Korg Apps: iMS-20, iElectribe, iKaossilator
Old Korg Gear: Electribe EMX-1SD, monotribe (with MIDI), Kaossilator Pro, KP3, SOS |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|