View previous topic :: View next topic |
Author |
Message |
MartinHines Platinum Member
Joined: 21 Jan 2003 Posts: 3036 Location: Topeka, KS (USA)
|
Posted: Sat Jan 14, 2012 6:39 pm Post subject: RH3 Keybed Information |
|
|
********************
This is an update from Sharp....
Anyone looking for the original thread where the issue was first diuscussed can CLICK HERE.
Please note that the thread is now locked as the solution is in place. All duscussion on the fix can be diuscussed in this thread here.
Regards
Sharp.
********************
Let's use this thread to post information regarding the Kronos RH3 fix thread.
PLEASE ONLY POST IF YOU HAVE HAD THE REPAIR PERFORMED ON YOUR KRONOS.
If this is like other repairs, Korg will have created a document for their Authorized Service Center technicians that describes the fix.
PLEASE POST:
1. When and where you had the repair performed
2. Which model (73 or 88 )
3. Any information you were told about the specific repair made
4. The results -- did the fix work?
5. Serial Number (optional)
Side Note: For anyone shipping their keyboard to be serviced, I would recommend double-boxing.
** Updated ** _________________ ** KORG Product Support Contacts **
(they support BOTH hardware and software)
Korg USA Product support -- https://www.korgusa.com/contactus (For fastest service I would suggest calling them on the phone)
Outside the U.S. contact your Korg Country Distributor -- https://www.korg.com/us/corporate/distributors/
Last edited by MartinHines on Sun Jun 03, 2012 6:41 pm; edited 5 times in total |
|
Back to top |
|
|
Jeff Gibbs Junior Member
Joined: 26 Mar 2009 Posts: 59
|
Posted: Sat Jan 21, 2012 3:38 pm Post subject: |
|
|
I just wanted to let everyone know that my Kronos 88 which was taken care of by my music dealer Marshall Music in northern Michigan whom I presume sent it in to a Korg service center for repair is back and it's FANTASTIC! I do not know what was done beyond what I can see myself.
The whole turn around took less than a week. Whether this will be the norm I have no idea. I imagine that the fix may take shorter or longer depending on where the work is done and whether or not shipping is involved. I have had the Kronos back for a day but wanted to make sure that everything was cool before posting. What a relief. It certainly is a different action and is either the same or slightly better for my playing style than the previous keybed. The OS was also updated to 1.5.2, so it's possible that the slight improvement I experience in the action is in the software or maybe just relief I can focus on the wonderful musical experience of the Kronos at last. Others might prefer the slightly different but perfectly wonderful original keybed feel/action. The important thing is that the double-note issue seems 100% resolved.
Last edited by Jeff Gibbs on Sat Jan 21, 2012 5:20 pm; edited 1 time in total |
|
Back to top |
|
|
petem
Joined: 13 Dec 2011 Posts: 29 Location: Andover, UK
|
Posted: Sat Jan 21, 2012 4:40 pm Post subject: |
|
|
Great news! |
|
Back to top |
|
|
Jeff Gibbs Junior Member
Joined: 26 Mar 2009 Posts: 59
|
Posted: Sat Jan 21, 2012 4:45 pm Post subject: |
|
|
I forgot to mention an RH3 made in JAPAN sticker is affixed to the keys just as before. Yes great news indeed. |
|
Back to top |
|
|
michelkeijzers Approved Merchant
Joined: 08 Feb 2007 Posts: 9113 Location: Netherlands
|
Posted: Sat Jan 21, 2012 7:12 pm Post subject: |
|
|
Looking at the OS1.5.2 and the physical repair it is (WAS!) both a combined software/hardware problem.
Edit: sorry ... I just see above I shouldn't have posted in here. _________________
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/
Last edited by michelkeijzers on Sun Jan 22, 2012 3:25 am; edited 1 time in total |
|
Back to top |
|
|
EXer Platinum Member
Joined: 17 Jan 2011 Posts: 558 Location: France
|
Posted: Sat Jan 21, 2012 8:42 pm Post subject: |
|
|
Not necessarily. A software update may be required not to solve a purely hardware double trigger issue but for compatibility with the response of the new keybed. |
|
Back to top |
|
|
jick Full Member
Joined: 03 Sep 2011 Posts: 195 Location: Netherlands
|
Posted: Sat Jan 21, 2012 10:34 pm Post subject: |
|
|
michelkeijzers wrote: | Looking at the OS1.5.2... |
What did I miss? _________________ Rick
Youtube! |
|
Back to top |
|
|
MartinHines Platinum Member
Joined: 21 Jan 2003 Posts: 3036 Location: Topeka, KS (USA)
|
Posted: Sat Jan 21, 2012 11:50 pm Post subject: |
|
|
jick wrote: | michelkeijzers wrote: | Looking at the OS1.5.2... |
What did I miss? |
Nothing. It appears part of the fix involves updating the OS to v1.5.2, as opposed to the currently available 1.5.0. This implies the OS update only relates to this keybed replacement, and only those people who have the keybed replacment need this OS update. _________________ ** KORG Product Support Contacts **
(they support BOTH hardware and software)
Korg USA Product support -- https://www.korgusa.com/contactus (For fastest service I would suggest calling them on the phone)
Outside the U.S. contact your Korg Country Distributor -- https://www.korg.com/us/corporate/distributors/ |
|
Back to top |
|
|
billysynth1 Platinum Member
Joined: 22 Jan 2005 Posts: 1148 Location: Australia/Melbourne
|
Posted: Sun Jan 22, 2012 2:57 am Post subject: |
|
|
So there is both a keybed replacement and an update to version 1.5.2 for the new keybed...is this right?
I need to know pls because i phoned my distirbutor here and he said that they were going to adjust the existing keybed and that should solve the problem, no make mention of a new keybed and no make mention of a software update. Just an adjustment or movement of the existing keybed.
Sorry to come in, i know Martin only asked for those who have had the fix.
However, i will report once i get mine fixed - its going in next week.
Regards
Billy _________________ Yamaha C1 Grand Piano.
Korg Oasys 88, Jupiter 80
Kronos 88, V Synth GT
I am a student of classical piano...I am not a classical pianist. |
|
Back to top |
|
|
PianoManChuck Platinum Member
Joined: 09 Aug 2011 Posts: 832 Location: Los Angeles, CA
|
Posted: Mon Jan 23, 2012 4:14 am Post subject: |
|
|
The replacement keybed is on order for my Kronos 88 which is at my local service center.
However... I just came back from NAMM. I tried the new keybed, which I was assured will be the exact same one my replacement will be (along with a software update... I presume to 1.5.2). Its absolutely beautiful!! All keys feel uniform (no different feel between black & white keys), no orthodontist needed to straighten out the keys, and the action is absolutely fantastic! In fact, maybe even better than before! It does have an RH3 sticker on it.
That being said, I can't wait to get my K88 back from the shop. Its going to be better than it was before (even if it didn't have a problem). All they guys at the Korg booth (especially Rich F) were awesome!
So before I even get my K88 back from the shop, a huge "thank you" goes out to Korg. Rich F did state in an earlier post in another thread that no Kronos user would be unhappy... he was right. This new solution is phenomenal! Thank you Korg! _________________ Check me out at PianoManChuck |
|
Back to top |
|
|
PianoManChuck Platinum Member
Joined: 09 Aug 2011 Posts: 832 Location: Los Angeles, CA
|
Posted: Mon Jan 23, 2012 4:16 am Post subject: |
|
|
billysynth1 wrote: | So there is both a keybed replacement and an update to version 1.5.2 for the new keybed...is this right?
I need to know pls because i phoned my distirbutor here and he said that they were going to adjust the existing keybed and that should solve the problem, no make mention of a new keybed and no make mention of a software update. Just an adjustment or movement of the existing keybed.
|
No... the solution requires both a keybed replacement and software update. _________________ Check me out at PianoManChuck |
|
Back to top |
|
|
EnjoyRC Platinum Member
Joined: 26 Aug 2008 Posts: 746 Location: John 3:16
|
Posted: Mon Jan 23, 2012 1:26 pm Post subject: |
|
|
PianoManChuck wrote: | However... I just came back from NAMM. I tried the new keybed, which I was assured will be the exact same one my replacement will be (along with a software update... I presume to 1.5.2). Its absolutely beautiful!! All keys feel uniform (no different feel between black & white keys), no orthodontist needed to straighten out the keys, and the action is absolutely fantastic! In fact, maybe even better than before! It does have an RH3 sticker on it. |
I can't wait to get mine back from the shop. Just a couple days to go. I also ordered the memory expansion. _________________
Korg (Kronos 88, RK-100S 2), Behringer DeepMind 12, Roland (GAIA, A-800-Pro) |
|
Back to top |
|
|
Sweat Full Member
Joined: 17 Dec 2011 Posts: 179 Location: Live Music Capital of the World
|
Posted: Tue Jan 24, 2012 6:41 am Post subject: |
|
|
It seems that this is being treated like a recall. I recently bought my Kronos from a band mate who needed the cash. The group has since dissolved and he is nowhere to be found. Since I don't know where he brought it, and I have not yet registered it, I wonder if I can still qualify for the fix. |
|
Back to top |
|
|
EnjoyRC Platinum Member
Joined: 26 Aug 2008 Posts: 746 Location: John 3:16
|
Posted: Tue Jan 24, 2012 12:07 pm Post subject: Re: Kronos RH3 Keybed Fix Thread |
|
|
I should get mine back any day now. FYI, they're charging me $55 to put the memory in during the same service call. It's like $25 for the memory and $30 for the labor. Can you believe somebody charges $30 to install a DIMM? Originally they wanted $40 labor. But I informed them that they already had the unit on the bench and open. _________________
Korg (Kronos 88, RK-100S 2), Behringer DeepMind 12, Roland (GAIA, A-800-Pro) |
|
Back to top |
|
|
michelkeijzers Approved Merchant
Joined: 08 Feb 2007 Posts: 9113 Location: Netherlands
|
Posted: Tue Jan 24, 2012 12:43 pm Post subject: Re: Kronos RH3 Keybed Fix Thread |
|
|
EnjoyRC wrote: | I should get mine back any day now. FYI, they're charging me $55 to put the memory in during the same service call. It's like $25 for the memory and $30 for the labor. Can you believe somebody charges $30 to install a DIMM? Originally they wanted $40 labor. But I informed them that they already had the unit on the bench and open. |
You could have asked how much it would saved if you removed (and refit) the screws ... most labor goes into that. Installing DIM (haven't tried it myself though) will probably take 2 minutes at most. _________________
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/ |
|
Back to top |
|
|
|