Korg Forums

rock_star · Junior Member Joined: 09 Dec 2009 Posts: 57

Hi to all,
My previous post has been avoided I hope this wouldn't go like that I just want to know that how can I increase sampled sound volume?

The thing is that I imported the Triton sound into my pa800 but when I loaded it sounds too low as compare to other samples. Please guide me this time.

Thanks

SKung · Joined: 20 Aug 2011 Posts: 39

There are numerous ways to adjust the volume:
Sample edit
- Normalize the sample
- Adjust volume in Multisample

Sound Edit
- increase the amp envelope
- increase velocity influence to the amp envelope
- increase the oscillator volume
- increase the filter offset

just check the manual

rock_star · Junior Member Joined: 09 Dec 2009 Posts: 57

Hi Skung
I am really thankful to you for your prompt reply. Actually I did everything as you sugessted but my problem is still there. Shall I mail you my sample file I hope you would find a way?

Thanks

rock_star · Junior Member Joined: 09 Dec 2009 Posts: 57

Hi SKung
Thanks for your detailed & quick reply. I did the same thing as you mentioned but my problem is still there. Shall I send you my set? May be you can find a way out.

Thanks

tonsy · Posted: Thu Feb 09, 2012 5:48 pm Post subject:

how bout use more than 1 oscilator with same multisample?it works for me
_________________
PA3X 61 256mb
PA2Xpro
PA800 256mb
roland g1000
roland g800
korg X5D
PA500

rock_star · Junior Member Joined: 09 Dec 2009 Posts: 57

Thanks for ur reply but Problem is still there. Shall I mail you the set?

SKung · Joined: 20 Aug 2011 Posts: 39

you can mail me the set if you want

rock_star · Junior Member Joined: 09 Dec 2009 Posts: 57

Hi Skung
Please check your PM Smile

Thanks

tonsy · Posted: Wed Feb 15, 2012 7:21 pm Post subject:

im curious to know...pliss send it to tonytonsy@gmail.com
_________________
PA3X 61 256mb
PA2Xpro
PA800 256mb
roland g1000
roland g800
korg X5D
PA500

rock_star · Junior Member Joined: 09 Dec 2009 Posts: 57

Hi Tonsy,
Please check your mail.

Thanks

SKung · Joined: 20 Aug 2011 Posts: 39

I checked your file and found a very small volume within the santur sample. Do the following:
- Open Sound Mode
- Press Record Button
- Press on the "edit" tab
- Press on <Empty>
- Locate the santur sample and click on it
- Now you see the santur sample. the white area is very small, which means the sample is not very loud
- Open the menu on the upper right
- choose "Normalize"
- Press on "Yes"
- Now the sample's volume is maximised, the white area is much bigger.
- Open the menu on the upper right
- Press on "Write"
- Press "OK" and confirm with "yes"

tonsy · Posted: Thu Feb 16, 2012 9:52 am Post subject:

write as the original sample... Very Happy

_________________
PA3X 61 256mb
PA2Xpro
PA800 256mb
roland g1000
roland g800
korg X5D
PA500

rock_star · Junior Member Joined: 09 Dec 2009 Posts: 57

Hi,
I don't know how to thank SKung for providing me the remarkable solution. This is why I love Korgies of this forum.

What I was doing wrong "I was not selecting the empty field and I tried to normalize without selecting the sample".

But luckily I have my friends SKung and Tonsy who guided me accurately.

Thanks again Very Happy

Azzy