| View previous topic :: View next topic |
| Author |
Message |
wudsiba
Joined: 11 Apr 2010 Posts: 27 Location: Ohio
|
Posted: Tue Nov 22, 2011 6:55 pm Post subject: Electrical popping using loop effects... |
|
|
I have a KP3 that I run my Mpc through, but I'm having trouble with subtle popping sounds when I lift my finger off the pad. For a long time I thought It was a looping issue, so I finally unplugged everything and ran a single sound source into it and the problem still exists. I've also checked the outlet to make sure it was grounded. If your reading this, and you have a KP3, try using the first loop effect with any sound source and see if you can here subtle pops as you slowly tap the pad... Driving me nuts. _________________ wudsiba
Kaoss Pad 3 |
|
| Back to top |
|
 |
kazeko
Joined: 20 May 2012 Posts: 6
|
Posted: Sun May 20, 2012 5:24 pm Post subject: |
|
|
same problem dude
im getting realy resigned about kp3
why this happend? |
|
| Back to top |
|
 |
wudsiba
Joined: 11 Apr 2010 Posts: 27 Location: Ohio
|
Posted: Mon May 21, 2012 12:15 am Post subject: |
|
|
I'm pretty sure now that it's just a non-zero crossing of a loop. Since it loops at different points depending on where your touching the pad, it loops right where you tell it too. Often it's not at a zero crossing so it pops. I'd love it if Korg could find a way around this... _________________ wudsiba
Kaoss Pad 3 |
|
| Back to top |
|
 |
kazeko
Joined: 20 May 2012 Posts: 6
|
Posted: Mon May 21, 2012 1:24 pm Post subject: |
|
|
| i agree |
|
| Back to top |
|
 |
|