Korg Ax3000g no sound is coming

Discussion relating to Korg's guitar effects and tuners.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
vishneo
Posts: 7
Joined: Mon Aug 06, 2012 6:59 am

Korg Ax3000g no sound is coming

Post by vishneo »

hi,

i have Korg AX3000g processor , i wasnt using it since last few months (3 months) and today when i plugged it , its not giving me any output sound. Not to the AMP and even not to the Headphones.

Any pointers guys ?

Regards

Vishneo
abhi30196
Posts: 11
Joined: Mon Aug 06, 2012 1:54 pm
Location: Mumbai

Post by abhi30196 »

Try contacting korg tech support. Nothing about this comes to mind right now. :( sorry
vishneo
Posts: 7
Joined: Mon Aug 06, 2012 6:59 am

Post by vishneo »

hi,

i have managed to get the sound its something to do with expression padel volume.i have got it but the moment i have powered it off and then power it back sound stopped coming back.

so i am missing some settings here how can i reset it to factory settings ?

Regards

vishneo
vishneo
Posts: 7
Joined: Mon Aug 06, 2012 6:59 am

Post by vishneo »

i have tried resetting it by holding up,down + exit switch but its not resetting any clues ?


Regards
abhi30196
Posts: 11
Joined: Mon Aug 06, 2012 1:54 pm
Location: Mumbai

Post by abhi30196 »

Here`s how you can restore the AX3000G`s programs and settings to the state in which it was shipped from the factory.

*NOTE*: Executing this procedure will erase all the programs you created and saved in the AX3000G, and will load the factory-set programs.

MIDI settings will also be initialized. If there are any settings you want to keep, you should first use the data dump function to back them up, or use the "Program sheet" (the fold-out inside the back cover of this manual) to write down your settings.

1. While holding down the three buttons (UP,Down), and EXIT switch, turn on the power.
The display will read "P" and the LED 1-4 buttons will blink, and the name display will ask "RELOAD?" Release the three buttons you were holding down.

2. If at this point you decide that you really don`t want to execute this operation, you can press the EXIT switch.

3. Press the WRITE button. The name display will show "LOADING", and the factory-set data will begin being reloaded.
When reloading has been completed, the name display will indicate "COMPLETE", and the AX3000G will automatically switch to Program Select Mode.

*NOTE*: Never turn off the power while this reload operation is occurring. 
vishneo
Posts: 7
Joined: Mon Aug 06, 2012 6:59 am

Post by vishneo »

thats what i am trying to do since last 2 hours but when i power off it didnt come to the state this text is saying to reset :(
abhi30196
Posts: 11
Joined: Mon Aug 06, 2012 1:54 pm
Location: Mumbai

Post by abhi30196 »

But the manual clearly states this as the required procedure. :shock:
Must be some minor bug in your hardware. Check for some third party error programs or get your processor serviced AFTER you consult with a authorized korg dealer or the technical support team.
vishneo
Posts: 7
Joined: Mon Aug 06, 2012 6:59 am

Post by vishneo »

hey abhi ,

can something be done connecting your processor to a computer ? and check all the parameters or settings by using some software ?
abhi30196
Posts: 11
Joined: Mon Aug 06, 2012 1:54 pm
Location: Mumbai

Post by abhi30196 »

You can edit your midi interface via a pc link though I am pretty sure you can't troubleshoot via a pc link.
vishneo
Posts: 7
Joined: Mon Aug 06, 2012 6:59 am

Post by vishneo »

hi,

one thing the sounds comes some time and it stays but when i switch off the power and switch it on sounds stops coming so is it something to do with the adapter ?


any pointers ?
longi
Posts: 36
Joined: Sat Feb 20, 2010 11:42 am

Post by longi »

If you turn off the expression controller via the EXP/CTL button and sift through the menu until the exp/off is shown then press save. Mine has done what yours has done before now, it's a simple fix. Have you tried connecting the AX3000G up to your computer via the software? It's a bit clearer there too.

Is the volume level on the back of the Korg fully up?
Does it do it on every patch?
You could try another adapter, it will still work with a 9V 300-350ma adapter.
Post Reply

Return to “Korg Guitar Effects and Tuners”