Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
Joined: 01 Apr 2011 Posts: 340 Location: 3rd Stone from the Sun , Bavaria
Posted: Fri Apr 13, 2012 7:49 pm Post subject:
thats cool
my first thoughts :
this board is really small,
and could get completely mounted INSIDE the WD
there is a lot of empty space inside for all kind of gimmicks.
this board has so many features , you dont need all of them for the WD
you could install one board , and control 2 / more connected wavedrums
from a central WD unit
yes , is it possible to connect wavedrums .....
is recording and playback of pressure infos possible (Ohm resistance)??
together with a trigger audio recording/playback
you would have a complete recording/playback of
everything what happens while playing the WD
during playback , you can choose another sound...
have you installed such a board already ?
Its very very interesting but not on my immediate to -do-list
so about 60$ for a more than solid MIDI solution.
I've reconfigured my MidiCPU at least 5 times, but never in conjunction with the wavedum. Right now it's going into this weird mechanical X-Y-Z controller mechanism I'm building... at this point I need control surfaces w-a-ay more than I need instruments. _________________ Make. Write. Play drums
now I recognized that this board is a "one way solution"
MIDI OUT only (but who cares...)
using a regular audio out from the WD
(sitar sound /synth sounds with a long decay time)
would give more flexibility with sustained notes , than short trigger signals ,
so an outside solution with a nice encasing would be best.
does this board have CC controller output as well ?
if yes , you could control filter FX of a synth or multi FX .
and whatever with head pressure from the WD ...(+ from EXP pedal!)
I am really much tempted to order a board for experimenting (later)
your x-y-z controller sounds craaacy (for your personal "KAOSS"es?)
Is that kind of Theremin style?
together with a controllable delay effect
you are already reaching 4 dimensional controlling ...
ever considered to use the 5th dimension control (whatever this is) ?
The MidiCPU supports up to 12 rotary encoders, or 14 pots, plus switch matrixes, and every other kinda sensor I've ever thrown at it. You should be able to directly tap into the WD pressure sensor signal and have it drive a data line on the MidiCPU.
Highly Liquid also do a Midi-to-Machine board called the MD24 that lets you drive servos, relays and solenoids via a midi sequence. Alla those 'midi xylophones' you see on hacker sites? Powered by the MD24.
John at Highly Liquid is a real mensch... the product support he gives via the forum is unbelievably comprehensive.
The X-Y-Z controller is mechanical... I'm converting rotary pots to really long throw linear faders, then using a 3 axis mechanism to convert hand position in a physical space into fader movement. It's a more elegant machine than you'd expect it to be, but exceptionally old school in execution. If an ondes martenot had been 3 axis, it woulda looked like this, sorta. I'm building it to control spatial positioning of audio within Ableton initially, but I'm assuming other uses will come to light after it's completed. _________________ Make. Write. Play drums
Joined: 01 Apr 2011 Posts: 340 Location: 3rd Stone from the Sun , Bavaria
Posted: Sun Apr 15, 2012 7:59 am Post subject:
this board looks like to be able to midify the WD + more
+ at a fair price
hats off , the way you work with it seems much more developed
than only modifying a little bit , its more like inventing (?)
I hope one day you will still find free inputs on the MIDI board
to connect with the pressure sensor (and tell us ?)
(...piece of cake + a free "-Z- axis controller" )
I can't say enough good things about Highly Liquid; the tech support is jawdropping. They'll draw auxillary circuits and write your sys-ex code for you if it'll help you wring a bit more functionality out of their boards.
I prefer a mechanism over a purely electronic kinda controller... haptics are pretty important for expressivity.
...and Jean Laruendeau holds amazing lore. _________________ Make. Write. Play drums
Joined: 01 Apr 2011 Posts: 340 Location: 3rd Stone from the Sun , Bavaria
Posted: Tue Apr 17, 2012 8:04 am Post subject:
agreed + strongly recommended for every MIDI/Synth user
and a customer service like "drawing extra circuits and writing code"
is something that other companies could have a look at...
World + dog are hacking triggering applications together on the Kinect platform, but I'm still convinced that webcam based applications are an equally viable approach.
Joined: 01 Apr 2011 Posts: 340 Location: 3rd Stone from the Sun , Bavaria
Posted: Wed May 16, 2012 9:35 am Post subject:
So much interesting stuff ,
it s a pity , that I dont have a webcam
and no direct use for that at the moment .
for controlling , this is good ,
for creating tones (for me) probably too much random ...
I am still waiting for a direct brain to MIDI converter (wireless)
btw : I connected my WD XXL directly to my SPD-S
via my second Expression pedal "direct link connector" .
I could use my EXP pedal
to fully control the WD and the SPD-S effects at the same time.
(no shortcuts , no bad smell , no fried devices ...)
the WD pressure did also work over to the SPD-S... ,
but not to full 100% .
For MIDI control with the liquid MIDI board
or for direct expression control of a synthesizer (EXP IN)
I think , a good calibration would do the trick.
Hopefully sbd.is gonna test this in the future.
Next :
tests to control both Wavedrums
with pressure from one Wavedrum.
Joined: 01 Apr 2011 Posts: 340 Location: 3rd Stone from the Sun , Bavaria
Posted: Fri Feb 22, 2013 12:49 pm Post subject: Sensibility Increase
The Wavedrum Global is coming
A demonstration of the new sensibility features :
"Why can we not have this sensibility ??"
Actually its possible to increase the sensibility of a Silver/Ori
and to put something on top of it ...
Solution 1
new trigger piezos (27 mm instead of 20mm)
and a potentiometer for volume control (ca 5 Euro)
Solution 2 "2 x Boost"
the internal trigger signals simply need to get amplified and EQed.
The cable that goes from the head sensor to the mainboard ,
needs to be cut and connected to a small preamp /EQ
Output preamp goes to mainboard connector cable .
the same for the RimTrigger cable (with a 2nd preamp)
cheap preamp for 5 - 10 bucks
9 volt from inside Wavedrum
effect: higher sensibility , rim and head signal have separate control
this mod needs basic electronic skills
Solution 3 "Blend / Boost" (my favourite)
this is easy with existing trigger jacks ...
(no need to cut the cables)
WD Headtrigger out --> EQ(booster)pedal ---> WD Rimtrigger Input
the lower bands of the 7 band Guitar EQ emphasize the bass components(head)
the upper bands amplify the higher frequencies of the Rim´s bell sound
works like this :
the rim signal in every WD acustically Xtalks over to the head piezo
with about 80-90 % of its volume
These are original WD Trigger signals
recorded directly from the internal piezotriggers .
This pic shows the X Talk from the rim to the head
leftside half of the picture:
the upper (Stereo left) track is the head signal
there is nearly no X talk down to the rim track
In the right side area of the pic
you can see the strong X-Talk from (downside)Rim up to the head
with "blend / boost"
this "x-talked" rim signal
1.works onto the head algo and PCM as usual ....plus
2.also gets amplified and fed back to the Rim Algorithm ,
--- = back to itself , that means
---it works more sensible now
---louder and very special on the algos
---rim PCMS need to be edited to lower volume
effects :
1.higher sensibility
--tabla on the rim with fingertips
--some algos start to get more "alive"
2.rim Algo recieves head style ("bok") signal and
--rim algo now reacts as if programmed to the head.
--("why does it not sound as if it was programmed to the head ?")
...-->(here it does )
3."head signal plays rim algo "
--this alters the sounds
--even presets get interesting again
4.head and rim sounds get mixed together (I like that very much)
--new sounds
5. a footswitch or a volume pedal can turn this on/off or control the level
All solutions do of course amplify the playing noises/scratches
(sitar triggering with the fingernails in circles ...)
Hopefully there is somebody out there
who knows what I am talking about ...
no need to sell the "old Silver " ,
just to add a few horsepowers .
Still hoping that this forum gets a bit more alive
(edited to repost picture)
(and to add some info and explanations about blend/boost)
Last edited by WaterDrum on Mon Apr 22, 2013 6:14 pm; edited 2 times in total
Joined: 10 Jul 2010 Posts: 3384 Location: Middle of nowhere
Posted: Sat Apr 20, 2013 1:28 am Post subject:
Waterdrum those are some good ideas. No time to give them a try for fun I have been running through my G2u multi pedal and or an rc Booster into some QSC K10 speakers. Fun but not giving me the new tones from the algos.
Joined: 01 Apr 2011 Posts: 340 Location: 3rd Stone from the Sun , Bavaria
Posted: Sat Jun 01, 2013 9:10 am Post subject:
not ideas ... tested on the Silver and
soon reality on my to be fully modified Oriental
Since I have this increased sensibility on the Silver
I dont wanna play "normal" sens anymore .
There are so many ways to modify
--- with 1/4 " Mono/Stereo jacks / XLR , boost only or use an EQ
--- internal/external booster , various signal paths and , and ...).
--- integrating the Head2Rim blend/boost option as easy as possible
--- or make it a kind of "Modular System" with various Ins and Outs
Maybe I'll use the 2 channel preamp of this microfone set :
(straight piezo signals only, or even combined with the small microfones)
... so I still have not really decided what to do exactly .
OK , the following youtube is dedicated
to all"modders"who are talking only and not acting (email and forum)
After about 2 years I am still the only one with a modified WD .
A few people sent me emails
e.g. one year ago I got email "I wanna mod my WD"
on my request if he really wanna solder and all he wrote back
"no prob, I have 3 soldering irons and send email , when done..."
never heard of him again . no electricity ?
(not the only one ...)
As well I wanna dedicate this youtube to all these people
who ask a question , receive an answer
and do not even even come back to their own thread
to say yes/no (or maybe thankyou ? )
seems to be a strange communication style or sth. else ...
Still I hope this forum gets more active , isnt that what a forum is about ?
Enjoy the vid (you might have seen it earlier , already)
(the message comes from the lady on the right side)
Joined: 01 Apr 2011 Posts: 340 Location: 3rd Stone from the Sun , Bavaria
Posted: Sat Jun 01, 2013 9:48 am Post subject: The missing link between Guitar and (E) Percussion
here comes some more "food"
Guitar (and Bass) players around ?
I found this fantastic idea on Utube .
It is called "GPerc" (G uitar and Perc ussion)
and combines (E) percussion techniques and guitar playing.
Seems to be a (future ?) commercial product .
Below the floating pickguard on the bass string side (!)
he mounted one or more piezos triggers with volume controllers
and then feeds this signal through an FX chain (?).
This might be best signalfood for a modified WD
or for a WD MINI
one more
-guitarist plays Rimsound
and simultaneously Wavedrum can be fully used by percussionist
-or a guitarist can trigger the sitar sounds
and send the sound through a second special FX chain (+delay effect)
by balancing the right/left WD line outs
so many possibilities
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum