|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
SeedyLee Platinum Member
Joined: 13 Sep 2006 Posts: 1371 Location: Perth, Australia
|
Posted: Tue Apr 23, 2013 2:25 pm Post subject: I love the Monotribe CV/Gate upgrade! |
|
|
After a bit of stuffing around, I finally bit the bullet and built my own cable to connect the Monotribe to my audio interface for CV/gate control - and I'm glad I did! Being able to control the Monotribe using a sequencer/MIDI keyboard has taken it from being a novel toy to a usable production instrument.
I'm using Expert Sleeper's "Silent Way" to generate CV/Gate signals from my DAW which are relayed to the Monotribe via a Motu 828mk3. Not all audio interfaces are capable of generating the DC signals required to feed the CV/Gate input, but fortunately mine is. I had tried using a video camera cable to connect the Monotribe's sync input to my DAW, but after much trial and error discovered that the ground connections were wired incorrectly. Instead I constructed my own cable.
Huge thanks to Korg to introducing such an amazing and unexpected feature to this great little instrument! _________________ Current Equipment:
Korg Kronos 2 88, Reface CS, Roland JV-1080, TE OP1, Moog Subsequent 37, Korg ARP Odyssey, Allen & Heath Zed 18, Adam F5, MOTU MIDI Express XT, Lexicon MX200 & MPX1, Yamaha QY700, Yamaha AW16G, Tascam DP008ex, Zoom H6, Organelle, Roland J6 & JU06A
Previous: Triton LE 61/Sampling/64MB/4GB SCSI, MS2000BR, Kronos 1 61, Monotribe, NanoKontrol, NanoKeys, Kaossilator II, Casio HT3000, Roland VP-03, Reface DX, Novation Mininova, MPC One |
|
Back to top |
|
|
Kevin Nolan Approved Merchant
Joined: 04 Dec 2005 Posts: 2524 Location: Dublin, Ireland
|
Posted: Tue Apr 23, 2013 5:02 pm Post subject: |
|
|
Well done on doing that. And yes - it is a very exciting development. Providing CV and Gate over an ordinary 3/8" stereo jack plug allows for the Monotribe to be controlled as if an ordinary analogue synth, hugely enhancing its integration into extended musical setups. Enjoy! |
|
Back to top |
|
|
zululord
Joined: 31 Oct 2011 Posts: 22
|
Posted: Wed Apr 24, 2013 4:00 am Post subject: |
|
|
Hey SeedyLee,
have you tried the miditribe mod? I added midi in to my monotribe and control it via my EMX. It works brilliantly and just outputs Synth 1 from the EMX into the Monotribe (therefore it's not restricted to the 8 beats).
The only CV synth I've got is an old MG-1 and it's output is S-trigger so I don't think the cable you described would work for that
P.S. good to see another member from Perth on here! |
|
Back to top |
|
|
SeedyLee Platinum Member
Joined: 13 Sep 2006 Posts: 1371 Location: Perth, Australia
|
Posted: Wed Apr 24, 2013 5:07 am Post subject: |
|
|
zululord wrote: | Hey SeedyLee,
have you tried the miditribe mod? I added midi in to my monotribe and control it via my EMX. It works brilliantly and just outputs Synth 1 from the EMX into the Monotribe (therefore it's not restricted to the 8 beats).
The only CV synth I've got is an old MG-1 and it's output is S-trigger so I don't think the cable you described would work for that
P.S. good to see another member from Perth on here! |
I think there might be a few Perth folk lurking around on here, and yes, it's great to see!
I haven't tried the Miditribe mod yet. I have been tempted to add MIDI in the past, but to do so would involve modifying the Monotribe. I'd rather keep mine in original condition. I think the CV/Gate input keeps the analogue feel of the device, and I can still control it from my DAW/Sequencer using something like "Silent Way". But I think the Miditribe type ugrades are great, and if I had a second one I'd strongly consider doing it. _________________ Current Equipment:
Korg Kronos 2 88, Reface CS, Roland JV-1080, TE OP1, Moog Subsequent 37, Korg ARP Odyssey, Allen & Heath Zed 18, Adam F5, MOTU MIDI Express XT, Lexicon MX200 & MPX1, Yamaha QY700, Yamaha AW16G, Tascam DP008ex, Zoom H6, Organelle, Roland J6 & JU06A
Previous: Triton LE 61/Sampling/64MB/4GB SCSI, MS2000BR, Kronos 1 61, Monotribe, NanoKontrol, NanoKeys, Kaossilator II, Casio HT3000, Roland VP-03, Reface DX, Novation Mininova, MPC One |
|
Back to top |
|
|
PB21
Joined: 11 Jun 2012 Posts: 42
|
Posted: Sat Jun 01, 2013 6:06 pm Post subject: |
|
|
SeedyLee wrote: | zululord wrote: | Hey SeedyLee,
have you tried the miditribe mod? I added midi in to my monotribe and control it via my EMX. It works brilliantly and just outputs Synth 1 from the EMX into the Monotribe (therefore it's not restricted to the 8 beats).
The only CV synth I've got is an old MG-1 and it's output is S-trigger so I don't think the cable you described would work for that
P.S. good to see another member from Perth on here! |
I think there might be a few Perth folk lurking around on here, and yes, it's great to see!
I haven't tried the Miditribe mod yet. I have been tempted to add MIDI in the past, but to do so would involve modifying the Monotribe. I'd rather keep mine in original condition. I think the CV/Gate input keeps the analogue feel of the device, and I can still control it from my DAW/Sequencer using something like "Silent Way". But I think the Miditribe type ugrades are great, and if I had a second one I'd strongly consider doing it. |
would the focusrite saffire pro 40 allow this? _________________ Peter Bailey |
|
Back to top |
|
|
SeedyLee Platinum Member
Joined: 13 Sep 2006 Posts: 1371 Location: Perth, Australia
|
Posted: Sun Jun 02, 2013 2:40 am Post subject: |
|
|
The Saffire 40 doesn't have DC Coupled outputs, so it can't be used for directly generating a CV/Gate control signal. However it's still possible to use SilentWay with such an interface, but it will require the construction of a simple cable to convert AC encoded control signals to DC signals.
Lots of details as to how to achieve this at:
http://www.expert-sleepers.co.uk/siwaacencoder.html
The most basic design requires a single capacitor and a single diode, so it's vey straightforward if you know how to use a soldering iron! _________________ Current Equipment:
Korg Kronos 2 88, Reface CS, Roland JV-1080, TE OP1, Moog Subsequent 37, Korg ARP Odyssey, Allen & Heath Zed 18, Adam F5, MOTU MIDI Express XT, Lexicon MX200 & MPX1, Yamaha QY700, Yamaha AW16G, Tascam DP008ex, Zoom H6, Organelle, Roland J6 & JU06A
Previous: Triton LE 61/Sampling/64MB/4GB SCSI, MS2000BR, Kronos 1 61, Monotribe, NanoKontrol, NanoKeys, Kaossilator II, Casio HT3000, Roland VP-03, Reface DX, Novation Mininova, MPC One |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|