View previous topic :: View next topic |
Author |
Message |
Donethur
Joined: 17 Apr 2009 Posts: 44
|
Posted: Sun Jul 21, 2013 3:20 am Post subject: Possible issue with KK (solved, related with EG filters) |
|
|
Hello,
I dont know why, but when I am trying to modify the EG filter in a "init" patch, no modification to the sound occurs. I try for example only to move those parameters when I select an "init" patch and as far I know, the sound should change because I am controlling the filter. Should I actívate anything else?, please give me an example how it should work.
I can modify Factory presets moving the knobs, but not the init sounds.
please your help!
thanks!
Last edited by Donethur on Sun Jul 21, 2013 2:58 pm; edited 1 time in total |
|
Back to top |
|
|
Lando2
Joined: 05 Jun 2013 Posts: 48 Location: Germany
|
Posted: Sun Jul 21, 2013 9:33 am Post subject: |
|
|
Hi,
Filter EG has no effect as long the cutoff frequency is on maximum.
Turn it down to a lower frequency and you should here the effect.
The EG only highers the cutoff frequency and thats not possible when it is on maximum.
Maybe you also have to set the filter EG to hear an effect, try to rise the attack level f. I.
Lando |
|
Back to top |
|
|
Donethur
Joined: 17 Apr 2009 Posts: 44
|
Posted: Sun Jul 21, 2013 2:50 pm Post subject: |
|
|
Yes, I did it. I reduced the cut off and theorically it should work. Nonetheless, no changes in the sound are appreciated
The weird thing is that I can see the parameters changing in the screen and I can modify the filter using the knobs in an already made preset. Weird... |
|
Back to top |
|
|
Donethur
Joined: 17 Apr 2009 Posts: 44
|
Posted: Sun Jul 21, 2013 2:57 pm Post subject: |
|
|
I found the problem!
I had to set the amount of EG in page s34-Filter "EG1Int"
|
|
Back to top |
|
|
Lando2
Joined: 05 Jun 2013 Posts: 48 Location: Germany
|
Posted: Sun Jul 21, 2013 5:24 pm Post subject: |
|
|
???
I think its the same parameter you change with the Filter EG Int knob.
So both ways might work. |
|
Back to top |
|
|
Donethur
Joined: 17 Apr 2009 Posts: 44
|
Posted: Mon Jul 22, 2013 2:37 am Post subject: |
|
|
Lando2 wrote: | ???
I think its the same parameter you change with the Filter EG Int knob.
So both ways might work. |
Are you talking of the two knobs that control the LFO? (filter and pitch). if yes, i think they are not the same funtion, if not, I am a bit confused. |
|
Back to top |
|
|
Lando2
Joined: 05 Jun 2013 Posts: 48 Location: Germany
|
Posted: Mon Jul 22, 2013 7:37 am Post subject: |
|
|
No, there is a knob EG Int, thats for the Filter EG. |
|
Back to top |
|
|
Donethur
Joined: 17 Apr 2009 Posts: 44
|
Posted: Mon Jul 22, 2013 11:25 pm Post subject: |
|
|
Lando2 wrote: | No, there is a knob EG Int, thats for the Filter EG. |
oh yeah, you are f*ck*ng right. |
|
Back to top |
|
|
|