View previous topic :: View next topic |
Author |
Message |
allochthon
Joined: 29 Oct 2013 Posts: 8
|
Posted: Thu Jan 09, 2014 2:32 am Post subject: Controlling tempo via external MIDI clock? |
|
|
I'm at a loss at how to do this. I want to send a MIDI time signal from a sequencer (Roland MC-303) to the Monotribe via MIDI out of the 303. I naively thought that the Doepfer Dark Time would fit the bill, but no dice. I can get it to sort of talk to a MIDI-controller via the 2.1 firmware upgrade and using a hand-wired 4-connector mini-jack from the CV/Gate outputs of the Deopfer. Pretty unimpressive result.
The only reference I have tracked down specifically referencing this - not controlling anything else besides tempo - was accomplished by sending a square wave from an LFO from a Deopfer Dark Energy into the sync.
I am very close to getting the MIDITribe, but I can't actually discern if it can do this. I control three other devices with the 303, and am aching to get the Monotribe on board.
Any thoughts welcome, although I will freely admit I'm a bit of a MIDI / CV dummy. |
|
Back to top |
|
|
chris-korg Full Member
Joined: 31 Oct 2013 Posts: 220 Location: Austria
|
Posted: Thu Jan 09, 2014 9:11 am Post subject: |
|
|
Get the MIDItribe !!!
It opens up much more possibilities for the Monotribe than anything else:
MIDI Note - ON / OFF
MIDI Velocity to VCA LEVEL (Needs MONOTRIBE OS 2.0)
Pitch Bend - Pitch Bend Wheel (-7 / +12 semitones)
LFO INT. - Modulation Wheel - CC 1
VCA LEVEL - Volume or Expression - CC 7 or CC 11 (Needs MONOTRIBE OS 2.0)
LFO RATE - General Purpose Controller 1 - CC 16
EG SHAPE - General Purpose Controller 5 - CC 80
LFO TARGET - General Purpose Controller 6 - CC 81
LFO MODE - General Purpose Controller 7 - CC 82
LFO WAVE - General Purpose Controller 8 - CC 83
AND you have MIDI-In and MIDI-Out !!
With only cv/gate-in you will have only very limited possibilities with the Monotribe.
Chris |
|
Back to top |
|
|
darenager Junior Member
Joined: 30 Sep 2013 Posts: 64 Location: UK
|
|
Back to top |
|
|
darenager Junior Member
Joined: 30 Sep 2013 Posts: 64 Location: UK
|
|
Back to top |
|
|
DrHoo Platinum Member
Joined: 23 May 2010 Posts: 657 Location: North Wales, UK
|
Posted: Thu Jan 09, 2014 7:00 pm Post subject: |
|
|
I use the amazing machines midi i/o & i just can't imagine a better mod kit out there. _________________ My current Korg gear. MS20 Mini... & now the .... Oh, maybe not !
...Had a few other Korg things over the years. |
|
Back to top |
|
|
allochthon
Joined: 29 Oct 2013 Posts: 8
|
Posted: Thu Jan 09, 2014 8:14 pm Post subject: |
|
|
Thanks, all! MIDItribe ordered! I wonder how long it'll take to make it's way from Brazil to CA...
I'm hoping to mostly use the Monotribe sequencer as a slave to a drum machine, hence my question regarding having it only sync to the clock signal, nothing else. However, since the ribbon is fairly useless as a keyboard, what I'm hoping can happen is:
MC-303 out --> MicroKORG out --> Monotribe
Since the 303 is the master clock, and the MicroKORG is using external clock, I'm hoping I can enter in key info to the Monotribe and also have MicroKORG functionality (i.e., use it separately). I think I might have a problem, in that anything I play separately on the MicroKORG will still be sent to the Monotribe, which I don't always want...
So.. I may need to build/buy a manual MIDI-switcher so that I can turn off the signal from the MicroKORG so that it won't control the Monotribe. Or, switch it to be a direct slave of the 303. If the Monotribe will keep on doing it's thing once it loses or switches the MIDI signal, then cool.. if not, then it won't work.
Maybe I'll just need to get a MIDI controller with an in and out to preserve the clock?
Yes, I'm thinking out loud, but if this all makes any sense, please chime in and tell me I'm on the right track / loony.
Cheers. |
|
Back to top |
|
|
darenager Junior Member
Joined: 30 Sep 2013 Posts: 64 Location: UK
|
|
Back to top |
|
|
darenager Junior Member
Joined: 30 Sep 2013 Posts: 64 Location: UK
|
Posted: Mon Jan 13, 2014 7:37 pm Post subject: |
|
|
chris-korg wrote: | Get the MIDItribe !!!
It opens up much more possibilities for the Monotribe than anything else:
MIDI Note - ON / OFF
MIDI Velocity to VCA LEVEL (Needs MONOTRIBE OS 2.0)
Pitch Bend - Pitch Bend Wheel (-7 / +12 semitones)
LFO INT. - Modulation Wheel - CC 1
VCA LEVEL - Volume or Expression - CC 7 or CC 11 (Needs MONOTRIBE OS 2.0)
LFO RATE - General Purpose Controller 1 - CC 16
EG SHAPE - General Purpose Controller 5 - CC 80
LFO TARGET - General Purpose Controller 6 - CC 81
LFO MODE - General Purpose Controller 7 - CC 82
LFO WAVE - General Purpose Controller 8 - CC 83
AND you have MIDI-In and MIDI-Out !!
With only cv/gate-in you will have only very limited possibilities with the Monotribe.
Chris |
Just to clarify this, the specs above are not exclusive to the Amazing Machines one, the Midi functions are part of the Monotribe firmware.
Google gameboy genius monotribe midi and you will see.
Yes cv/gate only gives control of the synth section. _________________ My Monotribe Only Album
My MonotribeMod blog |
|
Back to top |
|
|
|