View previous topic :: View next topic |
Author |
Message |
geebake
Joined: 25 Oct 2009 Posts: 26
|
Posted: Wed Feb 06, 2013 10:09 pm Post subject: TR Rack Blinking Program Number |
|
|
I'm recently sold a TR Rack and when I delivered it to the buyer, we turned it on to make sure all was well. It operates perfectly except the program number is blinking constantly. We did a factory reset, reloaded all the banks and it still blinks. It may have always been blinking and I didn't notice. The buyer told me he had one in the past and it did not blink. I can't find any information about this. For all I know, it should be blinking. Like I said, I never noticed one way or the other. It seems to operate just fine.
Does any one know what might cause this? Or is this expected behavior?
Thank you,
Greg |
|
Back to top |
|
|
Spacecowboy Full Member
Joined: 26 Nov 2007 Posts: 152 Location: Atlanta, ga. USA
|
Posted: Thu Feb 07, 2013 3:40 pm Post subject: |
|
|
mine doesnt blink. are talking about the whole patch name blinks? its more than a number. _________________ Korg Trinity Pro 4 DW8000's Access virus KC Roland G8 2 Yamaha ex5's Korg poly 61 Soon to have a Prologue
Last edited by Spacecowboy on Tue Jul 01, 2014 10:26 pm; edited 1 time in total |
|
Back to top |
|
|
synthjoe Platinum Member
Joined: 21 Apr 2010 Posts: 1011
|
Posted: Sun Feb 10, 2013 1:09 am Post subject: |
|
|
Mine doesn't blink, either.
However, something similar happens when you have the DI-TRI option installed, the system clock set to 'Word Clock' and there's no valid clock input on the BNC terminal.
Do you have the DR-TRI option installed, perhaps? |
|
Back to top |
|
|
SoundWerx
Joined: 10 Oct 2011 Posts: 28
|
Posted: Tue Jul 01, 2014 10:00 pm Post subject: |
|
|
Came across this, thought I would answer it. You will see that behaviour on a TR with SYS firmware 1.0. The latest firmware is v1.0.4 and the only place I know where you can still get that online is here:
http://www.korg.it/ita/SYS/trrsys.htm
Don't bother with the one under 'Windows' as it is corrupt. Weirdly the OS update under 'Macintosh' is actually Windows as well and isn't corrupt. It's a simple case of:
1) extract the OS update files to a bootable DOS USB stick (use Rufus for making this).
2) boot your computer off the prep'ed USB stick
3) connect the AG-001 data cable from your computers COM port to the TR (I made my own cable, schematics are available online)
4) power on the TR rack using the .TXT instructions provided with the update
5) execute the updater batch file
Job done.
I have 3 TR racks and have updated them all this way without issue. I've bought and sold several TR racks but I've only seen the blinking patch number on OS 1.0 firmwares.
You can see your current version number by hold down 'EDIT' and '>' while turning your TR rack on. |
|
Back to top |
|
|
Adrenalin
Joined: 13 Sep 2017 Posts: 1
|
Posted: Wed Sep 13, 2017 1:27 pm Post subject: |
|
|
Hi,
This is my first post to this forum.
I would like to ask if someone could provide me with the latest 1.0.4 firmware for TR Rack. The link above does not seem to work any longer.
I just bought the rack and I have the same blinking program number problem (using firmware 1.0.0), so I would like to solve the issue with the update.
Thanks a lot!
Arpad |
|
Back to top |
|
|
sunmachine
Joined: 02 Jan 2018 Posts: 1
|
|
Back to top |
|
|
|