View previous topic :: View next topic |
Author |
Message |
kevjh
Joined: 02 Feb 2013 Posts: 1
|
Posted: Sat Feb 02, 2013 1:07 pm Post subject: AX300OG ISSUE |
|
|
Hi there folks.
After not usin my ax3000g for a while,i decided to get it out n use it with my shiny new headphones.
But unfortunately it didn't want to play ball.
Has no power going through it at all.
i have checked the power supply and that is fine.
just seams a bit strange as its been boxed and left in a warm dry area.
will it be costly to repair or shall i just get a new smaller mfx unit. |
|
Back to top |
|
|
alland Platinum Member
Joined: 17 Jun 2009 Posts: 577 Location: Estonia
|
Posted: Thu Mar 21, 2013 11:12 am Post subject: |
|
|
Just finished repairing my friends AX3000G.
He used wrong adaptor and fried the unit - it blinked and was unstable and eventually did not work at all.
1) Use right adapter with proper voltage (9V DC) and polarity - AX3000 requires adaptor with reversed polarity plug - different than 95% adaptors in any household. See polarity diagram near dc inlet.
2) I was able to obtain AX3000 service manual with wiring diagram and changed few components in internal power circuitry restoring its porwe and board working again. (Above that I changed malfuctioning microbuttons on main board).
So with soldering, local eletronics shop and voltmeter something can be done. I'd first open unit and measure whether power is OK inside unit. _________________ Korg KronosX/Pa4x/M3 • Ableton • Komplete 13 • Omnisphere • soundcloud.com/allandd |
|
Back to top |
|
|
David Ohyama
Joined: 12 Oct 2014 Posts: 2
|
Posted: Sun Oct 12, 2014 9:53 am Post subject: AX3000 keeps going into write mode |
|
|
Lately my AX3000 is automatically going into write mode. For example I will be in something like BTQ CLN and after maybe 10 minutes or so it goes into write mode usually off the analog delay if I dont step on it and get it back to BTO CLN it will start running through the delay parameters like base treble mix etc by itself. I can push write and write complete but after a while it will go back to write mode,
any advice? |
|
Back to top |
|
|
|