View previous topic :: View next topic |
Author |
Message |
dcpiano88
Joined: 14 Jul 2013 Posts: 8 Location: San Francisco, CA
|
Posted: Mon Sep 07, 2015 9:52 pm Post subject: Program Change (MSB, LSB) numbers |
|
|
I have scoured the internet for a list of the Program Change numbers for the new Korg Kronos 2 and have not found anything and my experimentation has also failed. I would certainly appreciate any help anyone could offer. I use Mainstage 3 and Logic Pro X to change the sounds on my controllers during a live performance and on every other controller I own (Yamaha S90XS, Roland Integra 7, and my old Korg Triton Workstation), there are lists out there that correspond to each patch with a Program Change Number (generally the numeric number of the sound/instrument) and an MSB/LSB number that I can enter into my DAW that allows me to change banks and sounds. The best I could do is program a list of sounds into the set list and then control it there but then that limits you to only 128 patches. AS a Broadway programmer and pianist, it is not uncommon to see shows with over 400 patch changes per show so I need to be able to do this outside of the set list.
Any help would be greatly appreciated. As a Kronos newbie, this board is invaluable.
Thanks in advance,
Kevin |
|
Back to top |
|
|
bobmusic Senior Member
Joined: 03 May 2004 Posts: 269 Location: Germany
|
Posted: Tue Sep 08, 2015 12:03 am Post subject: |
|
|
Maybe tis is what you search for. a while ago i made two Logic Multiinstruments with preprogramed MSB/LSB bank changes:
http://www.korgforums.com/forum/phpBB2/viewtopic.php?t=82338&highlight=logic+multi _________________ Best regards, Robert
______________________
Korg Gear: Kronos 88 & 73 (2nd SSD, 3GB RAM, silent fan)
Trinity Pro with MOSS-Board, PBS FlashRom, HDR, Optical DI
Korg Collection 3 |
|
Back to top |
|
|
StephenKay KARMA Developer Approved Merchant
Joined: 18 Jun 2002 Posts: 2979 Location: Scottsdale, AZ
|
|
Back to top |
|
|
dcpiano88
Joined: 14 Jul 2013 Posts: 8 Location: San Francisco, CA
|
Posted: Tue Sep 08, 2015 6:08 am Post subject: |
|
|
I saw this, but for some reason, I can still only change Programs, I cannot change any of the Internal or User Banks and it is set to Korg and not GM2 so I am not sure what I am missing. |
|
Back to top |
|
|
StephenKay KARMA Developer Approved Merchant
Joined: 18 Jun 2002 Posts: 2979 Location: Scottsdale, AZ
|
Posted: Tue Sep 08, 2015 2:04 pm Post subject: |
|
|
If it is set to Korg Bank Map, you should be able to send these MIDI messages to change bank and patch:
CC# 00 Val 000
CC# 32 Val 001
Program Change #nnn (changes to Bank I-B nnn)
or
CC# 00 Val 000
CC# 32 Val 014
Program Change #nnn (changes to Bank U-G nnn)
The only other thing I can think of is there is a setting in Global MIDI > MIDI Filter for "Bank Change" - if this checkbox is off, then no bank changes would happen. _________________ Stephen Kay - KARMA Developer • Karma-Lab - karma-lab.com
|
|
Back to top |
|
|
ksi Full Member
Joined: 29 Sep 2009 Posts: 128 Location: DK
|
Posted: Thu Sep 10, 2015 7:36 am Post subject: |
|
|
dcpiano88 wrote: | I saw this, but for some reason, I can still only change Programs, I cannot change any of the Internal or User Banks and it is set to Korg and not GM2 so I am not sure what I am missing. |
make sure you have enabled KRONOS to receive Bank Change messages in the GLOBAL P1: MIDI -- MIDI page.
The checkboxes for Enable Program Change as well as for Bank Change have to be checked in order for the KRONOS to transmit and receive these messages. |
|
Back to top |
|
|
ed_f Approved Merchant
Joined: 03 Dec 2011 Posts: 1063 Location: Boulder, CO
|
|
Back to top |
|
|
|