View previous topic :: View next topic |
Author |
Message |
dommel
Joined: 15 Sep 2015 Posts: 13
|
Posted: Mon Nov 02, 2015 8:56 pm Post subject: Different channels in midi |
|
|
Hello folks,
Maybe a silly question but i have not this sorted out yet. I managed to connect Kronos to Cubase and use it as an midi instrument, but when i add more midi tracks (using another kronos sound) , i hear for all tracks the same Kronos sound. When i assign another channel to any kronos midi track i hear nothing (only default channel 1 has sound). Any way to overcome this problem so that each kronos track has its own channel ? |
|
Back to top |
|
|
tomto66 Senior Member
Joined: 26 Jan 2015 Posts: 336 Location: Belgium
|
Posted: Mon Nov 02, 2015 9:24 pm Post subject: |
|
|
Assuming you use a combi. Go to tab Timbre Parameter and set every 'track' to a different midi channel. _________________ Kronos X-88, Nanopad2, Tascam US122 MKii, Roli Rise 49 |
|
Back to top |
|
|
dommel
Joined: 15 Sep 2015 Posts: 13
|
Posted: Mon Nov 02, 2015 10:37 pm Post subject: |
|
|
tomto66 wrote: | Assuming you use a combi. Go to tab Timbre Parameter and set every 'track' to a different midi channel. |
Thanks for your reply. No, i am talking about programs and i want to use different programs from kronos into cubase at the same time |
|
Back to top |
|
|
Canoehead
Joined: 09 May 2015 Posts: 25 Location: Madoc, Ontario, Canada
|
Posted: Tue Nov 03, 2015 12:06 am Post subject: |
|
|
Hello Dommel. If I understand correctly, you want to play back a sequence on Cubase controlling more than one Kronos program at the same time. If this is what you want to do, you need to create a combination in Kronos assigning the voices to different MIDI channels as mentioned by tomto66. In Program mode you can only access 1 program at a time.
Hope this helps,
Gord |
|
Back to top |
|
|
dommel
Joined: 15 Sep 2015 Posts: 13
|
Posted: Tue Nov 03, 2015 12:53 am Post subject: |
|
|
Canoehead wrote: | Hello Dommel. If I understand correctly, you want to play back a sequence on Cubase controlling more than one Kronos program at the same time. If this is what you want to do, you need to create a combination in Kronos assigning the voices to different MIDI channels as mentioned by tomto66. In Program mode you can only access 1 program at a time.
Hope this helps,
Gord |
Thank you very much guys, i am not so dummy after all
|
|
Back to top |
|
|
|