View previous topic :: View next topic |
Author |
Message |
thegoldenchild
Joined: 11 May 2016 Posts: 10
|
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3777
|
Posted: Wed May 11, 2016 9:58 pm Post subject: |
|
|
It looks like the screen recognises when it's being pressed, but doesn't know where it's pressed. Doing a screen calibration may resolve the issue.
. |
|
Back to top |
|
|
thegoldenchild
Joined: 11 May 2016 Posts: 10
|
Posted: Wed May 11, 2016 10:02 pm Post subject: |
|
|
It's hard to see in the video but when pressing the drop down menu button on the screen, the menu flashes for a fraction of a second. |
|
Back to top |
|
|
thegoldenchild
Joined: 11 May 2016 Posts: 10
|
Posted: Wed May 11, 2016 10:03 pm Post subject: |
|
|
It seems to recognize where I press, I was just trying to press the screen while looking through the camera |
|
Back to top |
|
|
thegoldenchild
Joined: 11 May 2016 Posts: 10
|
|
Back to top |
|
|
thegoldenchild
Joined: 11 May 2016 Posts: 10
|
Posted: Thu May 12, 2016 1:52 pm Post subject: |
|
|
Cleaned the slider with electronic contact cleaner and compressed air, no change. |
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3777
|
Posted: Tue May 17, 2016 8:49 pm Post subject: |
|
|
Have you tried recalibrating the screen. It's a painless process, and should do no harm. Initialising the board will have lost the existing calibration data.
. |
|
Back to top |
|
|
ErnstDabest Senior Member
Joined: 18 May 2014 Posts: 266
|
Posted: Tue May 17, 2016 10:34 pm Post subject: |
|
|
When i was a kid we use to put magnets on our TV set to make it change 'groovy' colors
needless to say it messed-up the tv.. so-as the saying go, once bitten twice shy - i would
always tell people never to leave their VCRs onto of their TV set 'cos it will messed the
picture......
For you youngins' reading this was before HDTV.
nowadays i tell people beware of heat sources : space heater (radiator) direct sunlight,
and dust. cover up your keyboard with a bedsheet or a tablecloth when it's not in use. _________________
|
|
Back to top |
|
|
thegoldenchild
Joined: 11 May 2016 Posts: 10
|
Posted: Fri May 20, 2016 8:02 pm Post subject: |
|
|
I disassembled the unit and cleaned all the switches, pots, and sliders. That didn't help the problem but I was able to then upgrade to 2.5.3. I then reinitialized but no change. I ran a full test and the unit has two errors.
Midi Error Step 1
PCIF Error Step 1
Any thoughts on how to fix them?
What's interesting is the drop-down menu in the upper right works in the test screen but just flashes and disappears in regular mode.
Here's a pic of the errors.
http://i755.photobucket.com/albums/xx192/goldenpc/Photo%20May%2020%203%2052%2010%20PM_zps2otubbrp.jpg |
|
Back to top |
|
|
thegoldenchild
Joined: 11 May 2016 Posts: 10
|
Posted: Wed May 25, 2016 12:57 pm Post subject: |
|
|
I found a french forum that said the errors are normal if nothing is connected to the midi ports. So no lead from that.
I've read that running the full test resets the touch screen calibration, no change in behavior after running the test. I don't think I can recalibrate the screen once booted as I can't access the drop down menu in the upper right.
I've disconnected everything that wasn't necessary to boot the device and use the touch screen and it is still acting up. So, I'm leaning towards a mainboard problem. The big question will be, is it worth the $250-$300 for a used board. |
|
Back to top |
|
|
Falcon2e Platinum Member
Joined: 19 Feb 2008 Posts: 619 Location: Indiana USA
|
Posted: Wed May 25, 2016 1:28 pm Post subject: |
|
|
thegoldenchild wrote: | The big question will be, is it worth the $250-$300 for a used board. |
If you're in love with your Triton and you've got years of custom programing saved on it, it might be worth it. I have mine in retirement after purchasing a K2, it took weeks to rebuild my custom combis. _________________ Kronos2-61..(2) Triton Classic, Nord Stage 2, Previously owned lots of other gear dating back to the 70’s. |
|
Back to top |
|
|
thegoldenchild
Joined: 11 May 2016 Posts: 10
|
Posted: Thu May 26, 2016 9:17 am Post subject: |
|
|
It's for church and they were just using factory sounds. They only paid $500ish for it a year or so ago. I bet someone would even buy it as is for parts. |
|
Back to top |
|
|
thegoldenchild
Joined: 11 May 2016 Posts: 10
|
Posted: Fri Sep 02, 2016 4:54 pm Post subject: |
|
|
To possibly help someone else out. It ended up being the left board (KLM-2085). I replaced it with a new board and all the problems went away. |
|
Back to top |
|
|
|