| View previous topic :: View next topic |
| Author |
Message |
KenBigley
Joined: 03 Aug 2015
Posts: 6
|
 Posted: Thu Jul 14, 2016 9:30 pm Post subject: Syncing Electribe 2 to EMX-1 |
 |
|
Hi - I'm having issues trying to sync my electribes . I'm not too concerned which is the master. I've followed both manuals explicitly and can not get them to sync. HELLPPPPP (please  ) |
|
| Back to top |
|
 |
thehighesttree
Platinum Member
Joined: 18 Nov 2011
Posts: 594
Location: Canada East
|
| Posted: Fri Jul 15, 2016 10:07 pm Post subject: |
|
|
I can only comment on the EMX but the E2 should be similar.
ON THE EMX: Go into global mode, then hold SHIFT and hit 13(?) for Midi Utility and open the midi filter to allow whatever you want to sync, probably "C" but also maybe "N" or others. Then write this. Then set the clock to either external or internal depending on which you want to be in control. Hope that at least half helps! |
|
| Back to top |
|
|
KenBigley
Joined: 03 Aug 2015
Posts: 6
|
| Posted: Sat Jul 16, 2016 9:02 am Post subject: |
|
|
| thehighesttree wrote: | I can only comment on the EMX but the E2 should be similar.
ON THE EMX: Go into global mode, then hold SHIFT and hit 13(?) for Midi Utility and open the midi filter to allow whatever you want to sync, probably "C" but also maybe "N" or others. Then write this. Then set the clock to either external or internal depending on which you want to be in control. Hope that at least half helps! |
Many thanks - I'll give that a try thanks again |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
