View previous topic :: View next topic |
Author |
Message |
headhunter242
Joined: 24 Jun 2015 Posts: 13 Location: Mid West
|
Posted: Sat Aug 13, 2016 9:31 pm Post subject: ES2 export all samples stuck at 98% - can't find samples |
|
|
Sampled a voice sample for the first since updating the firmware and when I exported all samples it became stuck at 98% and wouldn't turn off. I was using batteries which I never do but had to remove a battery just to get it to respond. It wiped all the patterns and sample data. I was able to restore pattern data but I cannot seem to get it to load my samples. The samples I imported from a SD card are still on the card but everything else isn't showing up. I get a "Error - Format Error" when trying to load samples now.
I'm screwed, aren't I? If so, I think I'm done with the Electribe. |
|
Back to top |
|
|
SMK Platinum Member
Joined: 26 Nov 2006 Posts: 1197
|
Posted: Tue Aug 16, 2016 11:21 am Post subject: |
|
|
Is this before or after the 2.02 update? _________________ Korg PX5d
Korg Quad
Korg KP3
Korg DS-10
Korg PadKontrol
Korg K25
Korg Monotron
Korg Electribe 2
Korg Electribe Sampler 2
Roland GK-3A
Roland GI-20
Fishman Triple Play
BC Rich Guitar
My Music |
|
Back to top |
|
|
jpeg Full Member
Joined: 07 Sep 2015 Posts: 158
|
Posted: Tue Aug 16, 2016 11:23 am Post subject: |
|
|
the 2.02 update messed up the factory samples also _________________ soundcloud.com/jknowsis
MPC studio|Microkorg & XL|Reface CS & DX|Minilogue|Volca FM |
|
Back to top |
|
|
headhunter242
Joined: 24 Jun 2015 Posts: 13 Location: Mid West
|
Posted: Tue Aug 16, 2016 6:40 pm Post subject: |
|
|
SMK wrote: | Is this before or after the 2.02 update? |
After. Since then, some weird happenings had with the factory samples. After I found out everything but the synth sounds were wiped, I was able to load the factory samples but did not save them, turned off electribe, then back to zero samples, then I couldn't get them to load again. I think it's because afterwards I Exported All Samples when there was nothing on the ES2?
Either way..... I had almost filled up the 250 patterns and I now have started all over! In a weird way, it was kind of a blessing in disguise. I'm bummed that a year's worth of samples are lost but I was running out of space previously and still had a load of factory samples that needed to be deleted. Sooo I now have 260 seconds of time after loading drum sounds I actually want. Exporting works fine....for now. I do miss my 1950's horror movie samples though. :<
Huge credit to MusicRadar for their thousands and thousands of free samples. http://www.musicradar.com/news/tech/free-music-samples-download-loops-hits-and-multis-627820 (FYI most are stereo)
Currently trying to figure out how to get 1500 for the new Pioneer Toraiz.[/url] |
|
Back to top |
|
|
musicmagus Approved Merchant
Joined: 27 Jul 2015 Posts: 235
|
Posted: Tue Aug 16, 2016 9:45 pm Post subject: |
|
|
Next time you fill up, back up your work. |
|
Back to top |
|
|
jpeg Full Member
Joined: 07 Sep 2015 Posts: 158
|
Posted: Wed Aug 17, 2016 10:16 am Post subject: |
|
|
headhunter242 wrote: | SMK wrote: | Is this before or after the 2.02 update? |
After. Since then, some weird happenings had with the factory samples. After I found out everything but the synth sounds were wiped, I was able to load the factory samples but did not save them, turned off electribe,
started all over! In a weird way, it was kind of a blessing in disguise. horror movie samples though.
.[/url] |
exactly the same thing happened factory samples gone just patterns and synth parts left; but a blessing in disguise as am now loading in my own drums and will start adding my own samples. after almost 8 months of ownership.
But I did record my patterns with the factory samples before the update _________________ soundcloud.com/jknowsis
MPC studio|Microkorg & XL|Reface CS & DX|Minilogue|Volca FM |
|
Back to top |
|
|
headhunter242
Joined: 24 Jun 2015 Posts: 13 Location: Mid West
|
Posted: Wed Aug 17, 2016 10:11 pm Post subject: |
|
|
musicmagus wrote: | Next time you fill up, back up your work. |
Yes, I'm sure most people know this already but let this post be a PSA! Back everything up regularly! |
|
Back to top |
|
|
13enti
Joined: 11 Nov 2015 Posts: 5
|
Posted: Thu Sep 15, 2016 5:25 am Post subject: |
|
|
Just lost 2 sets of samples I did on the ES2. I did the 'export all...', which finished, but then I accidentally hit it again. Promptly canceled it and (incorrectly) assumed my first export had saved my samples. Booted back in later and found I had lost an hour's worth of sampling as well as the samples I had recorded in a previous session. Something to be careful about. Still was fun. |
|
Back to top |
|
|
|