Korg Forums

[Snorkum]

Does someone, by any chance, have a manual for this software, or can explain to me how to program the FCB1010 with this software?
Your help and advise is greatly appreciate it.
_________________
The only stupid questions are the questions that have not been asked.
-----------------------------------------------------
GEM SX3, PA900

[Nemik]

I don't think is manual for this software.
Is very easy to program when you understand how FCB 1010 works.
Is very confusing, but I try tell you basics.
1. FCB 1010 has 10 preset, means you can independently program 10 different sets.
2.Every control: PC 1-5, CC 1, CC 2, Exp A, Exp B, Note you set in Global for assign Midi Channel, which will be for all Presets.
-Same with enable Latch on Switch1 & 2.
3. Now on tab Presets you have to remember how this works.
a)when you press 1, then you fire messages on all PC 1 - 5, CC 1 & CC2 , sending NOTE, control Switch 1 & 2 and initiate Exp A & B for sending Data.
--means when you press 1 you can send up to 10 commands.
b)FCB1010 sending them one by one starting from PC1, PC2, PC3 etc
--means for example if you set PC1 & PC2 same channel(control keyboard channel IN), set PC1 to 92 (ending 1), PC2 to 95 (Fade in/out), after pressing FCB send first 10, then 11, means Korg will fire Ending 1, then Fade Out,
c) is very useful when you controlling more that one keyboard, you can use one press to send to all same time.
3. Tricky part is when you want to for example use Exp A just for Volume and Buttons for change var and fills or STS, every button has different setting value Data for each you need to set same, means you need to go thru all and make sure after you press any value will be same.
4.After you finish programming, you can create SysEx and save somewhere on computer, or if your FCB is connected you can just send all using Transmit SysEx.
Program will tell you what to do on FCB, will wait for export, so then you will need to on FCB use option SYSEX RCV (under button7 in global mode).

Feel free to ask if you got confuse.

here is link with some explaination:
http://www.mtnsys.com/?path=faq-fcb/showfaqs.asp%3f
_________________
Nemik
Korg Kronos2-61, Korg Pa600, Novation UltraNova, Akai Professional MPK49, Akai Professional MPK225 , Alesis QX-49, APC25 Keys, Launchpad MK2, Korg nanoPad2
MOTU Midi Express XT, FCB1010 with UnO, Behringer X2222 USB, TASCAM Model 24 Mixer, Presonus AudioBox96, M-Track Plus
Fl Studio 21, Ableton Live 10 Suite.
Korg Pa5x Sounds at Performers Heaven

[Snorkum]

Thanks for the fast reply.
I do forgot to ask you also, how you can save the programming or setup you did in the PC Editor.?
I cannot seems to be able to find it.
_________________
The only stupid questions are the questions that have not been asked.
-----------------------------------------------------
GEM SX3, PA900

[Nemik]

[Snorkum]

I tried to program, unfortunately it does mot work on my PA900.
Nothing is happening. It's a very simple program just to see if it works.
Nothing.
Don't know what I am doing wrong.
Control is set to Channel 16 on Korg
Global set to Channel 16 for PC1-5 on Editor
All I did was Pedal 1 -Var1
Pedal 2 - Var 2 and so on
_________________
The only stupid questions are the questions that have not been asked.
-----------------------------------------------------
GEM SX3, PA900

[Nemik]

write a list what you want, "I make for you and sent you over, then you load to program and study (compare) how need to be done.
make list like.
#1 -- PC1=CC90
#2 -- PC1=CC91
#3
#4
#5
#6
#7
#8
#9
#10
EXp A
EXp B
Also write Channels
and provide me with e-mail

Edit: If you want, you can sent me yours saved preset file and I will explain what went wrong.
_________________
Nemik
Korg Kronos2-61, Korg Pa600, Novation UltraNova, Akai Professional MPK49, Akai Professional MPK225 , Alesis QX-49, APC25 Keys, Launchpad MK2, Korg nanoPad2
MOTU Midi Express XT, FCB1010 with UnO, Behringer X2222 USB, TASCAM Model 24 Mixer, Presonus AudioBox96, M-Track Plus
Fl Studio 21, Ableton Live 10 Suite.
Korg Pa5x Sounds at Performers Heaven