Korg Forums Forum Index Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Help - Trinity is not outputting ribbon controller CCs

 
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Trinity
View previous topic :: View next topic  
Author Message
g3wn



Joined: 06 Oct 2016
Posts: 3
PostPosted: Thu Oct 06, 2016 11:17 am    Post subject: Help - Trinity is not outputting ribbon controller CCs Reply with quote
Hi, my Trinity seems to be only outputting the basic CC's: notes, after touch, etc... I have set the Global Midi Filters in the options to 'all' and the trinity seems to accept midi CC's from my DAW. I've looked every where in the global and sequencer settings and can't find a solution.

On, a related note. Does anyone know if you can edit the Trinity via another controller like the Behringer BCR-2000? Editing the Trinity with an external controller would make things so much easier. I've tried before to setup my BCR to edit the Trinity but the Trinity would not accept any of the controller messages.

Is it even possible to edit the Trinity in depth with a midi controller? If you can edit it with a controller is it possible to control the Trinity parameters in real time?


Thanks in advance!
Back to top
View user's profile Send private message
synthjoe
Platinum Member


Joined: 21 Apr 2010
Posts: 1011
PostPosted: Mon Oct 10, 2016 9:58 pm    Post subject: Reply with quote
Ribbon is tricky - it can be a HW failure. If so, you'll need a tech.

If you have all your patches and combis (and all else) saved safely, then you can try the factory diagnostics (probably you'll find on this forum somewhere the key combination to enter). If your ribbon fails to work there, then you're very likely to have a HW failure...

Good luck!
Back to top
View user's profile Send private message
g3wn



Joined: 06 Oct 2016
Posts: 3
PostPosted: Thu Oct 13, 2016 5:51 am    Post subject: Reply with quote
synthjoe wrote:
Ribbon is tricky - it can be a HW failure. If so, you'll need a tech.

If you have all your patches and combis (and all else) saved safely, then you can try the factory diagnostics (probably you'll find on this forum somewhere the key combination to enter). If your ribbon fails to work there, then you're very likely to have a HW failure...

Good luck!



Thanks. I will try that.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Trinity All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group