|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
FredrykPhox
Joined: 18 Jan 2017 Posts: 3
|
Posted: Wed Jan 18, 2017 3:20 am Post subject: RK100S - Simply cannot get vocoder to work |
|
|
I have gone by the manual letter for letter, and am using a perfectly functional non-powered, monaural microphone in the input port, set to mic1 or mic2. I have tried several different microphones that meet the requirements as well.
Is there -anyone- out there that has gotten the rk100s's vocoder to work on any of the settings at all? |
|
Back to top |
|
|
OpAmp Platinum Member
Joined: 07 Jun 2013 Posts: 1176 Location: Brussels, BE
|
Posted: Wed Jan 18, 2017 10:36 pm Post subject: |
|
|
Hi,
Did you try out the audio-thru function (mic connected, select either mic1 or mic2, shift+short ribbon button)?
If you talk in the mic you should hear it on the audio out connector.
If that is not the case, then your mic is not compatible or damaged, or your input port is damaged.
If that is ok, disable audio thru. Then select a vocoder program, hit some key and talk in the mic.
Good luck. _________________ microKORGXL, Kaossilator Pro, monotribe, SQ-1, volca fm, Kross 88 BK
Alesis SR18, Akai Miniak, Fender Strat, Line 6 Spider II 112, Zoom MS-50G |
|
Back to top |
|
|
FredrykPhox
Joined: 18 Jan 2017 Posts: 3
|
Posted: Tue Jan 24, 2017 1:29 am Post subject: |
|
|
OpAmp wrote: | Hi,
Did you try out the audio-thru function (mic connected, select either mic1 or mic2, shift+short ribbon button)?
If you talk in the mic you should hear it on the audio out connector.
If that is not the case, then your mic is not compatible or damaged, or your input port is damaged.
If that is ok, disable audio thru. Then select a vocoder program, hit some key and talk in the mic.
Good luck. |
Did all that.
Okay, I hooked up my ipod playing an audiobook with an aux cable, setting the mic switch to audio input, and the vocoder and stuff on the last 195-200 settings all work fine.
I have tried every mono non-powered mic I can find, pc mics, little bendy ones, even the EM197K for the microKorg, and not a single microphone I have tried generates any audio.
Now that I at least know the RK100S is working properly, can anyone actually tell me what extremely specific microphone I must own for this thing to work? |
|
Back to top |
|
|
woolei
Joined: 23 Nov 2016 Posts: 7
|
Posted: Tue Jan 24, 2017 2:15 pm Post subject: |
|
|
FredrykPhox wrote: | OpAmp wrote: | Hi,
Did you try out the audio-thru function (mic connected, select either mic1 or mic2, shift+short ribbon button)?
If you talk in the mic you should hear it on the audio out connector.
If that is not the case, then your mic is not compatible or damaged, or your input port is damaged.
If that is ok, disable audio thru. Then select a vocoder program, hit some key and talk in the mic.
Good luck. |
Did all that.
Okay, I hooked up my ipod playing an audiobook with an aux cable, setting the mic switch to audio input, and the vocoder and stuff on the last 195-200 settings all work fine.
I have tried every mono non-powered mic I can find, pc mics, little bendy ones, even the EM197K for the microKorg, and not a single microphone I have tried generates any audio.
Now that I at least know the RK100S is working properly, can anyone actually tell me what extremely specific microphone I must own for this thing to work? |
for my case, i just use a dynamic mic + 6.3mm to 3.5mm convertor, it work fine. |
|
Back to top |
|
|
FredrykPhox
Joined: 18 Jan 2017 Posts: 3
|
Posted: Wed Feb 01, 2017 12:52 pm Post subject: |
|
|
Had to get an XLR to 1/8", but got an XLR headset that works fine. Thanks for the timely help, people. |
|
Back to top |
|
|
St3fi
Joined: 27 Mar 2020 Posts: 1 Location: Germany
|
Posted: Mon Mar 30, 2020 12:39 pm Post subject: |
|
|
Hi guys,
thanks to your posts, I was able to get my vocoder to work, too.
It turned out that no matter what mic I used, the signal was just really really low. Even much lower as compared to line-in, when I put line-in e.g. from my phone or pc. (btw, podcasts are a nice input source to test your vocoder on line-in).
I used a dynamic XLR mic and an XLR to mini-jack (Miniklinke 3.5mm). Then I put the audio through and increased the pre-amplification on my audio interface until I could hear something. When you hear the audio-thru, also the vocoder should be audible.
Still, I am looking for another mic or headset that works. My cheap pc headsets didnt work for me....
Kind regards
St3fi |
|
Back to top |
|
|
Dr. Claw
Joined: 04 Jan 2021 Posts: 2
|
Posted: Mon Jan 04, 2021 8:24 pm Post subject: |
|
|
Having some real issues with the mic-in. Does anyone know what kind of microphone actually works? Any way to amplify the input signal? Line in works just fine. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|