View previous topic :: View next topic |
Author |
Message |
STM
Joined: 01 Mar 2016 Posts: 3
|
Posted: Tue Mar 01, 2016 2:30 pm Post subject: Korg Minilogue Sequencer / Ableton Problem |
|
|
Hi there,
I need a little help with the Minilogue. Whenever I hit play in ableton, the sequencer from the Minilogue plays. I can turn it off by pressing the play button on the Minilogue of course but when I stop and press play again the sequencer starts again.
Also, when I want to record the midi from the Minilogue, it just records the sequenced midi. I've looked in the manual but I can't seem to find a solution. Do you have any idea?
Hope someone can help me!
STM |
|
Back to top |
|
|
ccelson
Joined: 07 Mar 2016 Posts: 2
|
Posted: Mon Mar 07, 2016 9:45 pm Post subject: |
|
|
I'm also curious about this. Anyone know? |
|
Back to top |
|
|
STM
Joined: 01 Mar 2016 Posts: 3
|
Posted: Tue Mar 08, 2016 2:03 pm Post subject: |
|
|
I found the problem, it was due to the wrong midi settings in Ableton.
Minilogue (MIDI IN) should be on:
track: on / sync: off / remote: off
Minilogue (KBD/KNOB) should be on:
track: on / sync: off / remote: off
Minilogue (MIDI OUT) should be on:
track: on / sync: off / remote: off
Minilogue (MIDI SOUND) should be on:
track: on / sync: off / remote: off |
|
Back to top |
|
|
ccelson
Joined: 07 Mar 2016 Posts: 2
|
Posted: Thu Mar 10, 2016 6:03 am Post subject: |
|
|
Derp. Perfect, thank you! |
|
Back to top |
|
|
autowah
Joined: 13 Aug 2016 Posts: 1
|
Posted: Sat Aug 13, 2016 11:40 pm Post subject: Re: Korg Minilogue Sequencer / Ableton Problem |
|
|
STM wrote: | Hi there,
I need a little help with the Minilogue. Whenever I hit play in ableton, the sequencer from the Minilogue plays. I can turn it off by pressing the play button on the Minilogue of course but when I stop and press play again the sequencer starts again.
Hope someone can help me!
-------------------
Minilogue (MIDI IN) should be on:
track: on / sync: off / remote: off
Minilogue (KBD/KNOB) should be on:
track: on / sync: off / remote: off
Minilogue (MIDI OUT) should be on:
track: on / sync: off / remote: off
Minilogue (MIDI SOUND) should be on:
track: on / sync: off / remote: off
STM |
My guess is that also will disable the delay from being synced.
If that is the case then I would want Korg to fix that in a firmware update. Preferably to turn it on/off without any menu diving. |
|
Back to top |
|
|
thomaspatrickdit
Joined: 24 Aug 2016 Posts: 1 Location: London
|
Posted: Wed Aug 24, 2016 12:00 pm Post subject: |
|
|
Did anyone get any further with this?
Syncing LFO etc to Ableton projects seems like something very useful, but having the sequencer fire is incredibly annoying.
Only workaround is to delete sequencer recordings on the korg and save a new preset is the original is something you like.
Surely this can be fixed. |
|
Back to top |
|
|
moho
Joined: 24 Feb 2016 Posts: 34
|
Posted: Wed Aug 24, 2016 6:53 pm Post subject: |
|
|
thomaspatrickdit wrote: | Did anyone get any further with this?
Syncing LFO etc to Ableton projects seems like something very useful, but having the sequencer fire is incredibly annoying.
Only workaround is to delete sequencer recordings on the korg and save a new preset is the original is something you like.
Surely this can be fixed. |
I personally find this the best workaround because if the sequencer doesn't start neither does the motion thus limiting the sonic possibilities. |
|
Back to top |
|
|
7zark7 Junior Member
Joined: 09 Jul 2015 Posts: 62 Location: Chicago
|
Posted: Thu Aug 25, 2016 2:03 am Post subject: |
|
|
This can be set on the Minilogue side.
Press edit mode
LFO sync is under program edit
(under the 3rd parameter button aka Unison)
Press the button repeatedly to see the 3 pages of edits under that button.
Sequencer sync is under global edit
(under the 4th parameter button aka Mono)
Press the button repeatedly to see the 5 pages of edits under that button.
I don't use Ableton, but I hope this helps.
-7zark7 _________________ https://soundcloud.com/7zark7
Hardware: 1010 Audio Bitbox, Akai MAX25 pro, Alesis Micron, Korg ES2, Korg KP3, Korg microSampler MS-1, Korg Minilogue, Korg MS20 mini, Korg SQ-1, Korg Triton, Korg Volca Sample, Roland MC-307, Roland AIRA MX-1, Roland AIRA SYSTEM 1m, Roland JD-Xi, Roland AIRA Scooper, Roland AIRA Demora,
Software: Synapse-Audio Orion and loads of VST/VSTi |
|
Back to top |
|
|
andrzejmikosz
Joined: 26 Aug 2016 Posts: 1
|
Posted: Fri Aug 26, 2016 5:52 pm Post subject: Sequencing off not working |
|
|
I've changed this in the submenu, but it didn't work. It still does start every time this programmed sequence :/ |
|
Back to top |
|
|
djcactus Senior Member
Joined: 03 Dec 2011 Posts: 375
|
Posted: Mon Aug 29, 2016 11:22 pm Post subject: |
|
|
the lfo has several settings "under the hood" Make sure that you have the settings you want such as "key sync", "bpm sync", and "voice sync"
P33-35 in the manual will tell you a little more. Hope this helps _________________ 2xds-10, ds10+, m01 |
|
Back to top |
|
|
dillec
Joined: 22 Sep 2016 Posts: 1
|
Posted: Thu Sep 22, 2016 12:17 pm Post subject: |
|
|
Guys, I have a comparable problems but it's a bit more tricky.
I want to use the clock sync on the Minilogue on external, to have arpeggiators play in sync with Ableton, BUT this means that every time I hit 'play' in Ableton, the sequencer starts..
Does anyone know if it's possible to turn off JUST the sequencer start on sync but to keep the Arpeggiator sync? It would be so useful (in my case), but I'm not sure wether this is possible.. I find the midi options quite limited..
But if someone has a tip or trick, I'd be happy to hear it! |
|
Back to top |
|
|
OpAmp Platinum Member
Joined: 07 Jun 2013 Posts: 1174 Location: Brussels, BE
|
Posted: Thu Sep 22, 2016 9:13 pm Post subject: |
|
|
Hi,
I'm not familiar with Ableton, but solution should be found there. Because AFAIK the Minilogue has no MIDI filtering capabilities.
Note that Sync in theory should only send a clock to the Minilogue and not necessarily the Start/Stop commands when you push 'play'...
Other option is to try to delete the sequence data on the minilogue. So the sequencer will still run, but has nothing to do...
Bye. _________________ microKORGXL, Kaossilator Pro, monotribe, SQ-1, volca fm, Kross 88 BK
Alesis SR18, Akai Miniak, Fender Strat, Line 6 Spider II 112, Zoom MS-50G |
|
Back to top |
|
|
rhizome
Joined: 12 Nov 2016 Posts: 2
|
Posted: Sat Nov 12, 2016 5:39 am Post subject: |
|
|
Quote: | AFAIK the Minilogue has no MIDI filtering capabilities. |
MIDI slaves sending clocks out can be a pain in the ass as soon as you've got more than a couple of sequencers running... seems like something that could be added in firmware? |
|
Back to top |
|
|
firstofnine
Joined: 12 Jan 2017 Posts: 8 Location: Munich/Bavaria/Germany
|
Posted: Tue Feb 21, 2017 7:54 am Post subject: |
|
|
Hi there, though this threat is a few months old I am suffering from a similar problem. I run Logic Pro X as a MIDI clock master connected to a Korg Kronos. And I attached the Minilogue via MIDI through from the Kronos. Now each time I press start in Logic X the sequencer of the Minilogue starts playing. This is especially annoying when I want to record an Minilogue Arpeggio because it is "layered" with the sequencer when the recording starts.
Anyone an idea to fix this? _________________ If you don't change it - it will not change |
|
Back to top |
|
|
ActionRiddler
Joined: 14 Jun 2017 Posts: 1
|
Posted: Wed Jun 14, 2017 8:39 am Post subject: |
|
|
I just updated my monologue firmware to 1.1 (latest) and am still having the same problem with the ableton transport turning on the sequencer if you send sync data to the monologue. I'd be pretty annoyed if you can't send midi sync data while avoiding turning on the sequencer...
I'd like the ableton transport control to control the monologue transport (i.e. start and stop the sequencer IF i've turned it on), but just not turn on the sequencer if I've turned it off.
Any updates on this from anyone? |
|
Back to top |
|
|
|