|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
orycle
Joined: 18 Jul 2011 Posts: 8 Location: CT
|
Posted: Wed Oct 19, 2011 4:12 pm Post subject: Audio In Trouble |
|
|
Hey guys, i got an ESX im having trouble recording to. First, can u even record external audio to a bank without sampling it first? I am running an R3 through a KaoPro to the ESX. i cant seem to tweak any of the externals with the effects from the ESX i probably have something hooked up wrong, though i doubt it. Id like to use the R3 as the keyboard instead of the one on board the ESX. as of now ive been sampling the synth i want to the ESX and saving it just so i can apply effects, seems counter productive, at least to me...any help/suggestions would be greatly appreciated. Thanks
Tom |
|
Back to top |
|
|
Boris55
Joined: 18 Oct 2011 Posts: 23
|
Posted: Wed Oct 19, 2011 4:50 pm Post subject: |
|
|
you have to go in through your audio in 1/4 inch jack to sample anything, you probaly just forgot to to light up your audio in button that has to be lite in order to sample any thing into the esx-1.. |
|
Back to top |
|
|
Aciphecs Platinum Member
Joined: 16 Aug 2010 Posts: 558 Location: Biblical Proportion, Michigan
|
Posted: Wed Oct 19, 2011 5:13 pm Post subject: |
|
|
You said you were having trouble, but didn't describe the issue clearly or what you have tried that's not working. Just a little more info about the process and how your rig is connected will help. Thanks _________________ BP Soundcloud Page
BP Facebook Page
BP Youtube Channel |
|
Back to top |
|
|
Pastor-of-Muppets Platinum Member
Joined: 06 Jan 2010 Posts: 774 Location: UK
|
Posted: Wed Oct 19, 2011 6:20 pm Post subject: Re: Audio In Trouble |
|
|
orycle wrote: | First, can u even record external audio to a bank without sampling it first? |
that question doesn't make any sense - the only way the ESX can "record" audio is by sampling
if you just want to route audio through the ESX to use its effects (without sampling anything), then you need to sequence notes on the AUDIO IN part (next to the SLICE part).
You can put a single trigger for the AUDIO IN part on the first step of a pattern, then adjust the Gate time to the length of the entire pattern (16, 32, whatever) and that will cause the input to play continuously |
|
Back to top |
|
|
orycle
Joined: 18 Jul 2011 Posts: 8 Location: CT
|
Posted: Wed Oct 19, 2011 7:55 pm Post subject: Re: audio in |
|
|
well when you press the record play button you can record a drum beat just by playing out a beat with the part buttons so you CAN record on it, in a matter of speaking. so i was wondering if you could do that with the audio in button as a part button, guess ive got more reading to do.
Setup includes R3 in to Kaoss, Kaoss out to ESX. ESX supplying MIDI to Kaoss, and Kaoss supplying MIDI to R3, think thats right.
I know that you have to have the audio in button lit in order to sample, because the Kaoss or R3 will not be audible without it on. The part "audio in" button is the one I was questioning since it doesnt seem to have any effect on what im playing through the ESX. Again probably not using it correctly. Ill try fiddling with it tonight and see if can figure something out. |
|
Back to top |
|
|
Pastor-of-Muppets Platinum Member
Joined: 06 Jan 2010 Posts: 774 Location: UK
|
Posted: Wed Oct 19, 2011 10:21 pm Post subject: |
|
|
but when you hit record you aren't recording audio you're recording a pattern, which is info about what parts plays at each step - not audio
to play audio through the ESX use the Audio In part |
|
Back to top |
|
|
sotokangr
Joined: 05 Oct 2017 Posts: 2
|
Posted: Thu Oct 05, 2017 3:18 am Post subject: Same Question |
|
|
Hello community,
I do have the same problem/question as orycle.
Pastor-of-Muppets replied with this:
"You can put a single trigger for the AUDIO IN part on the first step of a pattern, then adjust the Gate time to the length of the entire pattern (16, 32, whatever) and that will cause the input to play continuously"
So the actual question is: Using the above comment, can we store/record this input from the external device? Such that when the sequence starts you play something and then, when it starts over, you can hear what you just played in a loop.
Furthermore can we have overdubbing on the recorded audio in part!??
FYI on the manual on page 58 this is explained and is a yes according to my understandings but I have the same problem with my esx and I can not hear anything after applying this technique!!
Please let me know if this is possible!
[/b] |
|
Back to top |
|
|
King Duppy
Joined: 19 Sep 2016 Posts: 9
|
Posted: Thu Oct 05, 2017 5:50 pm Post subject: |
|
|
Quote: |
So the actual question is: Using the above comment, can we store/record this input from the external device? Such that when the sequence starts you play something and then, when it starts over, you can hear what you just played in a loop.
|
The answer is "sort of."
Now, the reason is that I say "sort of" is that you're really asking the ESX to do two things at once:
(1) Record input from an external device or resample audio from the ESX itself.
(2) Loop or trigger this audio in real-time.
The ESX lets you do (1), but not (2). For what you’re describing, you actually want a looper rather than a sampler. Something like this guy here.
This is because the ESX uses two totally different kinds of storage:
The first kind is your sample data, which are all your recorded sounds (.WAV files) in a bank.
The second kind is “pattern data” — the data the ESX uses to know when to trigger your samples, how long they should play for, what parameters are around them, etc.
So the “pattern data” is what you’re actually “recording” when you hit RECORD in Pattern Mode (without adding the SHIFT key—we'll get to that in a sec). As Pastor-of-Muppets said, this doesn't recording audio at all—that would take up far too much disk space. Instead, you’re recording a set of instructions that tells the ESX how to play the samples it has in its memory.
However, by using these two kinds of storage, you can use manipulate a sample and save that as an all-new file by hitting “ SHIFT + RECORD." In fact, you can record any sound you make on the ESX as a new sample by using this feature.
This is resampling and it’s one of the most powerful features of the ESX.
Why? Because it lets you manipulate a sound however you like, use automation, etc., and then save that new sound as its own sample (that is, a new .WAV file in the ESX’s sample memory). You can then manipulate that sample as much as you like, and repeat the process as many times as your heart desires and your ESX's drive space allows you.
Using this technique, you can stack samples on top of each other indefinitely, and use that to create chords and fake polyphony, among other effects. In fact, as long as you’re careful with your disk space, you can overdub as many times as you like.
But unlike a looper, which records samples for instant playback, you can’t do this live, in real-time on the ESX.
Every time you record a new sample, you have to go into Sample Mode and save it as a new file, and then go into Pattern Mode to assign it to a pad before you can use it in a pattern.
Let me know if that makes sense!
-KD |
|
Back to top |
|
|
sotokangr
Joined: 05 Oct 2017 Posts: 2
|
Posted: Fri Oct 06, 2017 3:08 am Post subject: |
|
|
Thanks a lot for this extremely explanatory answer King Duppy!!
Yes it makes a complete sense right now.
Actually this was the bad case scenario I was expecting but couldn't find
a clear answer in the manual or on any google search. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|