Korg Forums Forum Index Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Korg Minilogue Sequencer / Ableton Problem
Goto page Previous  1, 2
 
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Analog Synths (General)
View previous topic :: View next topic  
Author Message
Nemi



Joined: 01 Aug 2017
Posts: 2

PostPosted: Tue Aug 01, 2017 8:54 am    Post subject: Reply with quote

Get into global edit mode, 4th page, and turn off "En Rx Transport".
When you hit play in your daw, you will receive clock regulary but sequencer won't start playing.

Cheers!
Back to top
View user's profile Send private message
moho



Joined: 24 Feb 2016
Posts: 33

PostPosted: Tue Aug 01, 2017 2:26 pm    Post subject: Reply with quote

Nemi wrote:
Get into global edit mode, 4th page, and turn off "En Rx Transport".
When you hit play in your daw, you will receive clock regulary but sequencer won't start playing.

Cheers!


I think that's only available on the monologue

I put my monologue between the sequencer and the minilogue and it filters out the start stop commands Very Happy
unfortunately this solution only works if you have both Crying or Very sad
but you may have other equipment keys / drum machines etc that do the same.
Back to top
View user's profile Send private message
Dapifer



Joined: 15 Oct 2017
Posts: 1

PostPosted: Sun Oct 15, 2017 6:59 pm    Post subject: Reply with quote

Has this still not been addressed? I can't understand how this can't be updated with a simple firmware update. Surely Korg can see how this would be a problem for a lot of people.

It's been bugging me long enough that it's tipping the scale on whether to trade in my Minilogue for another poly.
Back to top
View user's profile Send private message
jean serge desverges



Joined: 07 Nov 2017
Posts: 1

PostPosted: Tue Nov 07, 2017 9:38 pm    Post subject: Reply with quote

Looks like this work:

No sequencer triggered but still get the sync for BPM LFO.
Sequencer can be launched afterwards, in this case that will not be on a perfect time but just as you press PLAY on the korg.


Get LOOPMIDI
http://www.tobias-erichsen.de/software/loopmidi.html
Set one virtual midi port on the program

Then filtrer MIDI signal with MIDI-OX

I tried to root things this way:
MIDI sent from Minilogue (I record midi from it)
to
LIVE IN

LIVE midi OUT > MIDI-OX

MIDI-ox OUT > MIDI OUT (the soundcard's midi out)


I have no midi port on my soundcard so I use USB-MIDI gear which appear as USB MIDI on this pics:
MIDIOX SETUP:
https://www.dropbox.com/s/r9y5z98vwt33xz5/MIDIOX.jpg?dl=0
LIVE MIDI SET UP:
https://www.dropbox.com/s/94rkptyrwbok09x/LIVE.png?dl=0

Live must be launched AFTER midi-ox

Razz
Back to top
View user's profile Send private message AIM Address
7zark7
Junior Member


Joined: 09 Jul 2015
Posts: 58
Location: Chicago

PostPosted: Sat Nov 11, 2017 8:22 am    Post subject: Reply with quote

Hi,

I don't use Ableton or any loopback devices, and you may consider my setup a workaround that doesn't address all of your issues, but it works for me, so here it is.

I downloaded a range of pulses at different bpm's from a site...

http://tiptopaudio.com/circadian-rhythms-downloads/

...which I send from my DAW to BUS 5, routed to a dedicated out. Through some virtual routing with my DAW and my MX-1 mixer/interface, this signal is sending SYNC to my korg stuff (daisy chain sync volca/tribe/sq-1/minilogue). The added benefit of which is that the KORG stuff is more tightly synced to sample playback from my DAW, than synced to MIDI. I can still sequence via MIDI of course. You would be surprised at the difference it makes. Particularly, if you use samples in your DAW. Finally, your hardware will be synced to your DAW samples.

Feel free to request more details.

-7zark7
_________________
https://soundcloud.com/7zark7
Hardware: Akai MAX25 pro, Alesis Micron, Korg ES2, Korg KP3, Korg Minilogue, Korg MS20 mini, Korg SQ-1, Korg Triton, Korg Volca Sample, Roland MC-307, Roland AIRA MX-1, Roland AIRA SYSTEM 1m, Roland JD-Xi, Roland AIRA Scooper, Roland AIRA Demora,
Software: Synapse-Audio Orion and loads of VST/VSTi
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Analog Synths (General) All times are GMT
Goto page Previous  1, 2
Page 2 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group