| View previous topic :: View next topic |
| Author |
Message |
ProfessorNick
Joined: 16 Mar 2012
Posts: 30
|
 Posted: Sat Dec 30, 2017 2:16 am Post subject: Electribe 2 sample/ oscillator motion sequence possible? |
 |
|
Does anyone know if it is possible to motion sequence record the selection of samples in a pattern? Can a track have a pattern which alternates between samples like the Digitakt can do?
Don’t have the E2 Sampler, but this seems like a valuable feature since it only has 16 tracks and I would want 6 or so to control external synths via midi. That only leaves 10 tracks and I’d like some for synths and need at least 10 for drums.
Thanks. |
|
| Back to top |
|
 |
roblabs
Platinum Member
Joined: 25 Sep 2011
Posts: 1393
Location: NYC
|
|
| Back to top |
|
|
SMK
Platinum Member
Joined: 26 Nov 2006
Posts: 1197
|
| Posted: Tue Jan 02, 2018 7:43 am Post subject: |
|
|
I have not checked on this in a while, but remember it was possible to control the position sequencing of the OSC knob on the Sampler via the step edit mode. This I have done before. I don't remember if tried motion sequence or not. Let me get back to you on this. However, there is a way to do what you are trying to do. That "nope" is not entirely true.
_________________
Korg PX5d
Korg Quad
Korg KP3
Korg DS-10
Korg PadKontrol
Korg K25
Korg Monotron
Korg Electribe 2
Korg Electribe Sampler 2
Roland GK-3A
Roland GI-20
Fishman Triple Play
BC Rich Guitar
My Music |
|
| Back to top |
|
|
roblabs
Platinum Member
Joined: 25 Sep 2011
Posts: 1393
Location: NYC
|
| Posted: Wed Jan 03, 2018 1:58 am Post subject: |
|
|
He's talking about the main Oscillator knob used to select samples, not the OSC EDIT knob. NEither the e2 nor the e2s can motion sequence the oscillator/sample selection knob. similarly, you cannot motion sequence the Modulation or IFX selection knobs.
_________________
www.soundcloud.com/rob-labs |
|
| Back to top |
|
|
SMK
Platinum Member
Joined: 26 Nov 2006
Posts: 1197
|
| Posted: Fri Jan 05, 2018 6:38 am Post subject: |
|
|
| roblabs wrote: | | He's talking about the main Oscillator knob used to select samples, not the OSC EDIT knob. NEither the e2 nor the e2s can motion sequence the oscillator/sample selection knob. similarly, you cannot motion sequence the Modulation or IFX selection knobs. |
Oh yeah, I see. yep there is no step sequencing nor motion recording selection knobs.
_________________
Korg PX5d
Korg Quad
Korg KP3
Korg DS-10
Korg PadKontrol
Korg K25
Korg Monotron
Korg Electribe 2
Korg Electribe Sampler 2
Roland GK-3A
Roland GI-20
Fishman Triple Play
BC Rich Guitar
My Music |
|
| Back to top |
|
|
whazzup
Joined: 23 Feb 2018
Posts: 4
|
| Posted: Fri Feb 23, 2018 11:36 pm Post subject: Re: Electribe 2 sample/ oscillator motion sequence possible? |
|
|
| ProfessorNick wrote: | Does anyone know if it is possible to motion sequence record the selection of samples in a pattern?
Don’t have the E2 Sampler, but this seems like a valuable feature since it only has 16 tracks and I would want 6 or so to control external synths via midi. |
Yes yes yes, with resampling and slicing! It works 
And if you ever need to free up a track, resample again, that's where the power is in this machine.
So, I would first create a pattern 1 with 4 parts with my samples and then record my sequence as one sample, then after start up pattern 2 with my 1 part sample of 4 resampled, go into sample slice mode and ta da-- sample motion sequencing.
goodluck!
_________________
record |
|
| Back to top |
|
|
Poggianti
Joined: 03 Mar 2018
Posts: 3
|
| Posted: Sun Mar 04, 2018 1:33 am Post subject: |
|
|
| I used a simply trick on my esx that works even on e2s. Create a single wav sample with a sequence of your sound for category ( bass, kicks, etc). Then you can simply change sample on the steps using the "start sample" knob with motion sequence |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
