Korg Forums

[pferd]

Hello,
I am a newbie with Kronos, one question:
I want to layer in Combi-Mode Nr.1 (custom) 3 Sounds:
1. Piano
2. Strings
3. Organs
I have set the midi on all 3 to Global, so I can hear all three sounds.
How can I control per Volume Pedal just the volume from Strings and Organs? The volume of the piano must not be changed.

And then, on Combi Nr.2, I will change the Volume just on timbre 3, not on 1 or 2- so it is not a global setting with the volume-pedal.
Is it possible ?
Kind regards
Rainer

[darwinwiebe]

Do you have the operation guide for the Kronos? It's downloadable for free and it's quite useful as well as the 1100 page parameter guide.

What you want to do should be controllable via the midi filters tab. You can select whether a control has an effect on a timbre. You can choose which ones the joystick affects, the ribbon control, damper pedal, etc.

Check out the operation guide starting on page 78.

Better yet, go to page 477 of the parameter guide. More detailed.

[voip]

Another useful feature involves setting the Control Assign (2nd from left column of buttons) to Timbre/Track and then use the sliders to control the level of each timbre in a Combi.

[pferd]

thanks, control the volume with the slider for each timbre works, but I want to control the volume for a timbre with the volume control pedal.
Deactive the damper (hold pedal) for each timbre seperate in the combi work, but deactive the "Enable Foot Pedal" in MIDI Filter 3 for each timbre separte doesnt work. The volume pedal just work only for all timbre together, but I want to control the volume only on special timbres.
Any ideas ?

[pferd]

Global-)Controllers--)Foot Pedal Assign change to Volume (CC#07); after that you can control the volume seperatly on each timbres in combi-modi in MIDI-Filter3 active/deactive "Enable Foot Pedal"

[voip]

Setting the foot pedal to Expression CC#11 will also work.