|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
Svalan
Joined: 10 Mar 2018 Posts: 5
|
Posted: Mon Mar 12, 2018 11:28 am Post subject: Trouble w MS2K <-> MacBook |
|
|
Greetings!
I've been looking through the forums for an answer to my question, but no luck so far...
I'm trying to MIDI dump a patch I made but it doesn't seem to work, and I don't understand what the problem is. I'm hoping the KORG MS2K community will help me solve the issue.
Setup:
MS2K -> MIDI Interface (MIDI to USB cable) -> Mac.
The cable is hooked up so that the cable's IN is plugged into the MS2K's OUT socket and vice versa. It is one of these: https://www.gear4music.se/en/Recording-and-Computers/Twin-MIDI-to-USB-Interface-Cable-15m/1RPG
When I ask the MS2K to dump "1 prog" (the patch I want to backup) I can see something is going on. The MIDI monitor and SysEx Librarian from Snoize both tell me that data has been transferred and I end up with a .syx-file. But the MS2000 Librarian (by Daz) cannot read the file. Just tells me that it's not a KORG compatible file at all.
Also... and this has got to be related; I can't use the "audition" function in the MS2000 Librarian. I have set "Write Protect" to Off and "System ex" is set to ENA.
Is it the cable that is screwing me over or is there some setting I am missing? I know the interface cable works because I can play software synths in GarageBand.app using this same setup, for instance. The signal is there.
Any help would be much appreciated, I'm such a noob when it comes to MIDI and stuff.
Regards,
Svalan |
|
Back to top |
|
|
OpAmp Platinum Member
Joined: 07 Jun 2013 Posts: 1174 Location: Brussels, BE
|
Posted: Mon Mar 12, 2018 7:21 pm Post subject: |
|
|
Hmm, some USB-MIDI cables work fine for notes and controls (short MIDI messages), but they have problems with sysex transfers (long MIDI messages).
So if possible, try another cable.
Another test you can try. After dumping one program, choose another program on your board and send the sysex file back with Snoize. The board should sound again the same as the program you dumped. If that works fine, then the problem is not the cable. If it does not work, most likely it is due to the cable.
Good luck. _________________ microKORGXL, Kaossilator Pro, monotribe, SQ-1, volca fm, Kross 88 BK
Alesis SR18, Akai Miniak, Fender Strat, Line 6 Spider II 112, Zoom MS-50G |
|
Back to top |
|
|
Svalan
Joined: 10 Mar 2018 Posts: 5
|
Posted: Tue Mar 13, 2018 6:17 am Post subject: |
|
|
Oh, okay. That sounds like a good idea. I’ll try it with a fatter interface, like a PreSonus Audiobox or something like that.
I sure hope it’s the cable...
Thanks for your reply! I appreciate it. |
|
Back to top |
|
|
Svalan
Joined: 10 Mar 2018 Posts: 5
|
Posted: Thu Mar 15, 2018 2:58 pm Post subject: |
|
|
Yup, that was it. Thanks a bundle OpAmp! Works perfectly with a more capable interface.
Good times. _________________ MS2000, KP3, Kaossilator Pro, X50, MicroKORG XL, RedSound DarkStar, Cimmerian Caves. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|