|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
Shutoku Full Member
Joined: 17 Aug 2008 Posts: 143
|
Posted: Mon Sep 05, 2016 10:44 pm Post subject: |
|
|
So a bit of an update and some answers to questions.
These days I am using three keyboards live:
Yamaha CS synth
Korg Kross
Roland arranger keyboard as a midi controller
So the way I am running it the CS is on it's own (except I run it's output into the Kross mic input, so I only run cables from the Kross to the di box/mixer)
The kross covers all other sounds.
The Roland arranger is an old keyboard with a nice keybed. It is also quite light weight. I think around 15 lbs. It is midi'd to the Kross
Yes I have to run combi's in this set up. But the great thing is that by saving those combi's into the favourites with one button everything is set up except analog patches from the CS.
So since I am more or less in 4 bands plus some free lancing, and I teach music as my day job and have students using my rig, I have each bank of favourites set up for specific combis.
Bank A is for students, and typically is very specific to the songs they are doing. Especially with modern music.
Bank B is combis and programs for using the Kross on it's own, should I ever choose to do that.
Bank C is for specific gigs. For example in October I am doing a 2 or 3 song Kitaro tribute at a Buddhist Temple, so I will set all those combi's in bank C
Bank D is my regular gigging bank.
I have it set up so for the most part I run pianos and electric pianos on the Roland, hammonds, or orchestral sounds from the kross.
two of my bands don't have bass players, so I have a bass layer assigned to sw 1, so if I turn it on I have bass, turn it off I don't. (I also created a monophonic, low note priority bass patch so I can play chords and also get bass on the lowest note)
I wish the roland had another octave (it is 61 keys. I wish it had 73...enough for most piano playing, but still short enough to fit across most vehicles.
A Krome 73 would be a great choice, but for now it is out of my budget.) but there are definite advantages to having one central "brain" and multiple controllers. (I love the CS and I program it live rather than saving patches in an ios device. I like that I can shape and change the sound live and use the control panel in a musical way, so it is always out of the midi loop except if I go with just two boards, then I use the Kross as my piano and the CS as my organ etc. via midi) _________________ Stage: Korg Krome 88
Home: above plus Korg Kross 61, Korg m1, original Korg Mono/poly, Yamaha Reface CS, Yamaha KX-5 |
|
Back to top |
|
|
six_feet_under
Joined: 05 Dec 2014 Posts: 35 Location: Los Angeles, California, USA
|
Posted: Wed Apr 19, 2017 11:40 pm Post subject: |
|
|
Asleep By Dawn wrote: | I have controlled a ms2000 with kross so I imagine the reverse is possible with just two midi cords n some setup |
Asleep-By-Dawn, Im trying to setup my Kross to control a Yamaha MX-61. can you tell me more about that "simple midi cord setup"? Ideally, Im trying to send ControlChange(CC) Midi to the Yamaha from the Kross Favorites buttons, so I can setup both keyboards with a single Favorites selection. _________________ Los Angeles, California, USA ________ Kross-61, X50-61, Yamaha MX61, Roland AX-09 Lucina
¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ |
|
Back to top |
|
|
Russell_FMC
Joined: 04 Jan 2018 Posts: 6 Location: UK
|
Posted: Sat Apr 07, 2018 4:45 pm Post subject: Re: hooking a usb keyboard controller up to the Kross? |
|
|
My 1st post!
Did anyone find a solution to this? I am desperately trying to connect a Nanopad 2 (USB mini B) to a Kross (USB type C printer connector type).
TIA!
Shutoku wrote: | Probably there is an adaptor of some sort, but I have an m-audio keyrig 49.
For those unfamiliar it is a pretty basic controller with pitch and mod wheels, a volume slider, octave switches, and an "edit mode" button. It draws power from the computer it is plugged into.
Is there as way to wire it to the Kross and if so how would one determine the midi channel it is sending on? |
|
|
Back to top |
|
|
KalvinB
Joined: 03 Dec 2017 Posts: 20
|
Posted: Mon Apr 09, 2018 3:57 pm Post subject: |
|
|
One solution might be using a Raspberry Pi as a midi host. I was trying to interface a M-Audio Oxygen 49 controller (USB only, no midi DIN) to a Kross 2 or Yamaha MX. I had a Raspberry Pi (3) that I wasn't using and found directions for using it as a host controller online. The RPi is relatively inexpensive ($35 US) but will require some simple programming on your part. It works fine for connecting the two keyboards using the "Jack" application on the Pi. Here's a link to basic setup:
http://sandsoftwaresound.net/qsynth-fluidsynth-raspberry-pi/
You'll also have to set up midi receive channels and voices on the keyboard making the sounds. |
|
Back to top |
|
|
Russell_FMC
Joined: 04 Jan 2018 Posts: 6 Location: UK
|
Posted: Tue Apr 17, 2018 8:54 pm Post subject: |
|
|
Wow I like that idea! I downloaded Reaper a couple of days ago & that seems to have loads more MIDI routing options than Garageband, so I'll play with that for a while & then try out the RPi if I can't make it work.
KalvinB wrote: | One solution might be using a Raspberry Pi as a midi host. I was trying to interface a M-Audio Oxygen 49 controller (USB only, no midi DIN) to a Kross 2 or Yamaha MX. I had a Raspberry Pi (3) that I wasn't using and found directions for using it as a host controller online. The RPi is relatively inexpensive ($35 US) but will require some simple programming on your part. It works fine for connecting the two keyboards using the "Jack" application on the Pi. Here's a link to basic setup:
http://sandsoftwaresound.net/qsynth-fluidsynth-raspberry-pi/
You'll also have to set up midi receive channels and voices on the keyboard making the sounds. |
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|