View previous topic :: View next topic |
Author |
Message |
sauce Approved Merchant
Joined: 07 Feb 2011 Posts: 498 Location: ABQ, NM USA
|
Posted: Mon May 28, 2018 10:48 am Post subject: Electribe Sampler pad problem. |
|
|
I got another unit, cheap but "like new" on Amazon. Two or three of the pads have developed an issue where the pad triggers twice for every hit; once for on and once for off. It's weird.. Anyone else having the issue?
Thanks. _________________ Visit https://ghostwrittenclips.com for a FREE pack of robot-war/mech/cinematic fx samples. =) |
|
Back to top |
|
|
1_inch_punch Senior Member
Joined: 03 Sep 2012 Posts: 314
|
Posted: Tue May 29, 2018 12:43 am Post subject: |
|
|
had the E2 and ES2 since dot - never encountered or heard of anything like that.
There was a spate of people undertaking a mod to "lift" the pads as they wanted them higher.
I cant recall what they were inserting in the unit as i never had issues. |
|
Back to top |
|
|
sauce Approved Merchant
Joined: 07 Feb 2011 Posts: 498 Location: ABQ, NM USA
|
Posted: Tue May 29, 2018 1:56 am Post subject: |
|
|
I can't seem to reproduce the glitch. At the time the issue began I was doing really deep, step-by-step, drastic automation on a very large, stereo sample, which may have somehow caused the issue. Nonetheless, a reboot solved the issue, at least temporarily.
..and hello 1-inch-punch. Glad to see there are still hangers-on in the old forums. _________________ Visit https://ghostwrittenclips.com for a FREE pack of robot-war/mech/cinematic fx samples. =) |
|
Back to top |
|
|
1_inch_punch Senior Member
Joined: 03 Sep 2012 Posts: 314
|
Posted: Tue May 29, 2018 4:22 am Post subject: |
|
|
and welcome back to you, sir.
eager to see what you will be doing on the machine since your return.
The only glitch I get- and this is for both machines - if i have been working a lot on step editing a pattern in the step editor, come out and it wont play.. just .. nothing...
Stop the machine... move to a different pattern, play (it works) - go back to the worked pattern and it works too.
last time it happened was on weekend - but as I can never reproduce it i thought wasnt worth taking it fwd and that workaround has always worked. |
|
Back to top |
|
|
djenzyme
Joined: 21 Oct 2014 Posts: 10
|
Posted: Wed May 30, 2018 11:32 am Post subject: |
|
|
I have a pad issue and was wondering if anyone else has the same. Basically, some of the pads have a 'click' when pushing them. Not an audio click but you can actually feel the pad click as its pushed. Annoying because there is no consistency between the feel of the pads
I have had a few different kong controllers with pads over the years and none of them have felt like this. |
|
Back to top |
|
|
|