View previous topic :: View next topic |
Author |
Message |
karun75
Joined: 06 Jun 2018 Posts: 2 Location: Durban, South Africa
|
Posted: Wed Jun 06, 2018 9:20 am Post subject: Kronos to Kross2 midi program change |
|
|
Hello all
I'm new to this forum but I've been a Korg user for many years. I've recently found the need to use MIDI program change for live performance however this has been a huge challenge for me.
What I would like to do is control program and combi changes on a Korg Kross2 from a Kronos1.
Every attempt thus far has failed
I am using an empty Kronos Combi slot and I've set timbre15 to EX2. This is transmitting on MIDI channel 15.
The KROSS2 is receiving on MIDI channel 15 with all the MIDI filters in Global settings checked and the clock synced to external.
I cannot seem to find the MSB and LSB settings for the Kross but what I do find is that I can change the PRG and COMB from the Kronos and they seem to be synced to the Kronos Combi slot numbers for that bank.
I'm hoping to find a step by step guide but any help is welcome
|
|
Back to top |
|
|
miket2112
Joined: 28 May 2018 Posts: 5
|
Posted: Thu Jun 07, 2018 3:47 pm Post subject: |
|
|
I'm having a similar problem. I'm using a computer based midi sequencer ( easier for me). I can select patches from Bank A on the Kross, but can't get the Kross to accept bank select messages. So, if I select a sound from bank B the kross brings up the corresponding sound of bank A. _________________ New owner Kross 2 |
|
Back to top |
|
|
karun75
Joined: 06 Jun 2018 Posts: 2 Location: Durban, South Africa
|
Posted: Thu Jun 07, 2018 6:20 pm Post subject: |
|
|
Hi miket2112...I managed to get this working. In the global section of the Kross parameter guide you will find the MSB and LSB settings.
MSB remains 00 and the LSB bank changes are as follows.
Bank A - 00
Bank B - 01....and so forth
The only problem I've encountered is that in combi mode, the global channel of the Kronos sends the drum and sample tracks on channels 15 and16 respectively. The work around this is to switch the status of these timbres to OFF in the selected combi.
Hope this helps |
|
Back to top |
|
|
|