Korg Forums Forum Index Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

control portamento time in combi from knob 8+

 
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Kronos
View previous topic :: View next topic  
Author Message
kshacklett
Junior Member


Joined: 17 Feb 2011
Posts: 79
Location: Reno, Nevada

PostPosted: Sun May 05, 2019 5:07 pm    Post subject: control portamento time in combi from knob 8+ Reply with quote

Why does this have to be yet another huge ordeal? I've been programming synths since 1974. I programmed professionally for Sound Source Unlimited in the 90's. I understand that machines as powerful as the Kronos can get complicated..but why must every other ordinary function take ten times longer to figure out than with any other machine I've worked with? Can I use knob 8 to change portamento time in a combi, or not?

After three hours or so I finally got knob 8 to control portamento time in program mode... It was nice while it lasted. Now it doesn't work...and I haven't changed a thing that would affect it...either in the pitch common page or the controller page. It worked with Karma turned on or off. And now it doesn't..

Of course while it was working in program mode it wouldn't work in combi mode...even with the tone adjust on and set to the right slot and the knob set to the same function as made it work in program mode.

So far I haven't found anyone with a search of this site or a google search who can tell me how to do this simple function..or if it's even possible...even though the manual indicates it is.

The Kronos has been my main ax since 2011. I'm ready to check out Yamaha's latest flagships. The EX5 was the best value in flagships that I've ever seen...short of the Rhodes Chroma, which blew the competition away in 1982. I still have my Chroma..and three EX5s. Even without a touch screen the EX5 interface is much superior to the Kronos. All the functions are where they should be...not hidden in "Karma"..or convoluted..like this knob 8 fiasco. It is a simple matter to assign any applicable function to a knob. Now that Yamaha has caught up with touch screens their long standing over all superiority will probably draw me back. It's just a matter of whether I want to spend the time duplicating the sounds and setups that I've spent hundreds of hours developing on the Kronos.
Back to top
View user's profile Send private message
KK
Platinum Member


Joined: 13 Oct 2016
Posts: 1416

PostPosted: Sun May 05, 2019 6:38 pm    Post subject: Reply with quote

Make sure the EXi portamento AMS MIDI CC# is the same as what is selected for the particular knob under Basic/Controllers (under EXi 1 and/or 2, Osc/Pitch, Pitch).

In your case, Knob Mod #21 at the two places. You could change both to #83 as well, etc. I have a custom program which does a similar thing, I have edited it quite a bit with time and still works just fine.
_________________
Shhh  My Kronos 7 Cool
Back to top
View user's profile Send private message
Falcon2e
Platinum Member


Joined: 19 Feb 2008
Posts: 619
Location: Indiana USA

PostPosted: Mon May 06, 2019 12:57 am    Post subject: Reply with quote

I assign portamento to switch one. Of course that won’t work for you if you’re wanting to change the time/rate on the fly.
_________________
Kronos2-61..(2) Triton Classic, Nord Stage 2, Previously owned lots of other gear dating back to the 70’s.
Back to top
View user's profile Send private message
ronnfigg
Platinum Member


Joined: 26 Mar 2011
Posts: 2141
Location: CA

PostPosted: Mon May 06, 2019 3:04 am    Post subject: Reply with quote

I used the AL-1 engine. Go to the Program P4: Basic/Vector Tab and select "Controllers". Select Knob 8 and go to the 7th selection down which is "Portamento Time (CC#5)" & choose it. Now go to P4 OSC/Pitch and go to the Pitch Common Tab. Enable portamento and you should be good to go. No need to enter any value here. It appears the knob 8 assignment handles this. Be sure to "Write" your edits and understand that you cannot write edits to GM patches, so you would have to find a new empty location.
_________________
"To me the synthesizer was always a source of new sounds that musicians could use to expand the range of possibilities for making music."
Bob Moog
Back to top
View user's profile Send private message
kshacklett
Junior Member


Joined: 17 Feb 2011
Posts: 79
Location: Reno, Nevada

PostPosted: Tue May 07, 2019 7:13 am    Post subject: Reply with quote

I was successful in assigning portamento on and off to switch two. That's better than nothing. Also it was simple to assign portamento time to the foot controller (CC4), since it can be selected directly. I will try the suggestions here and see if I need to continue my rant. I want time on knob 8!

The Kronos has been my main ax for eight years because I only use the best. I own two for my studio and gigs that I can drive to. I just wish some parameters were organized better.

Oh...and tune up the CX3 engine! The sound of out of tune drawbars wavering has been driving me nuts since I first realized a long time ago that that's what I was hearing. I have two actual CX3s and the drawbars are in tune.. so I know it's possible!
Back to top
View user's profile Send private message
ronnfigg
Platinum Member


Joined: 26 Mar 2011
Posts: 2141
Location: CA

PostPosted: Tue May 07, 2019 4:31 pm    Post subject: Reply with quote

kshacklett wrote:
I was successful in assigning portamento on and off to switch two. That's better than nothing. Also it was simple to assign portamento time to the foot controller (CC4), since it can be selected directly. I will try the suggestions here and see if I need to continue my rant. I want time on knob 8!

The Kronos has been my main ax for eight years because I only use the best. I own two for my studio and gigs that I can drive to. I just wish some parameters were organized better.

Oh...and tune up the CX3 engine! The sound of out of tune drawbars wavering has been driving me nuts since I first realized a long time ago that that's what I was hearing. I have two actual CX3s and the drawbars are in tune.. so I know it's possible!

Keep us posted on your results.
_________________
"To me the synthesizer was always a source of new sounds that musicians could use to expand the range of possibilities for making music."
Bob Moog
Back to top
View user's profile Send private message
kshacklett
Junior Member


Joined: 17 Feb 2011
Posts: 79
Location: Reno, Nevada

PostPosted: Thu May 09, 2019 7:20 am    Post subject: Reply with quote

Well folks, after five hours or so I stumbled on the solution by trying different control assignments in the Control Surface page of the Play parameters. My discovery was confirmed by the Parameter Guide:

"I 0–9e: RT/KARMA (Real Time
Knobs/KARMA)
This Control Assign setting lets you modulate
Program, Combi and Effects parameters with the eight
knobs, and control KARMA with the switches and
sliders."

Korg could have probably saved me around 4 hours and 45 minutes if in the Pitch Common/Portamento Time/AMS section of the manual (4-4b) they had put simply: "For a knob to control portamento time RT/KARMA must be selected on the front panel under Control Assign, or on the Control Surface page of the Play parameters."

Thanks to all who made suggestions.

On to the next debacle.
Back to top
View user's profile Send private message
psionic311
Platinum Member


Joined: 14 Nov 2014
Posts: 1046
Location: Orlando, Florida USA

PostPosted: Thu May 09, 2019 12:16 pm    Post subject: Reply with quote

Glad you discovered the Real Time abilities of the Control Surface, sorry it was a long and painful process. Hopefully these tips will not only save you headaches in the future but also encourage to command more of the Kronos' powerful flexibility. Perhaps for future readers as well this will demystify the left side of the Kronos.
Back to top
View user's profile Send private message
ronnfigg
Platinum Member


Joined: 26 Mar 2011
Posts: 2141
Location: CA

PostPosted: Mon May 13, 2019 5:18 am    Post subject: Reply with quote

kshacklett wrote:
Well folks, after five hours or so I stumbled on the solution by trying different control assignments in the Control Surface page of the Play parameters. My discovery was confirmed by the Parameter Guide:

"I 0–9e: RT/KARMA (Real Time
Knobs/KARMA)
This Control Assign setting lets you modulate
Program, Combi and Effects parameters with the eight
knobs, and control KARMA with the switches and
sliders."

Korg could have probably saved me around 4 hours and 45 minutes if in the Pitch Common/Portamento Time/AMS section of the manual (4-4b) they had put simply: "For a knob to control portamento time RT/KARMA must be selected on the front panel under Control Assign, or on the Control Surface page of the Play parameters."

Thanks to all who made suggestions.

On to the next debacle.

So I guess my suggestions about the "Controllers " tab didn't work for you?
_________________
"To me the synthesizer was always a source of new sounds that musicians could use to expand the range of possibilities for making music."
Bob Moog
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Kronos All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group