Korg Forums

deepak · Full Member Joined: 02 Feb 2009 Posts: 103

Dear All, I need help, tips for transfer all from Korg PA3x to Korg PA1000.
I have overwritten some factory styles on my PA3X as well. I have a complete restore-backup of my Korg PA3x which apparently will not work directly on PA1000. I have saved the "Save-All" set of my PA3x as well. I just do not want to start on the wrong foot. Any help will be greatly appreciated.

karmathanever · Platinum Member Joined: 12 Jan 2004 Posts: 10399

You will need to perform a Save-All with the factory protect OFF - then the factory styles will be saved.
As you say, a full BKP backup will never work.

Be patient and all will be fine - you will have some fine tuning to do - the PA1000 is different.
You will need to selectively load your saved data - just loading the whole saved set will not work.

Plan your PA1000 first - i.e. where and how you want data to be loaded - whether you still want to overwrite factory data etc....

Good luck and have fun

Pete Very Happy

_________________
PA4X-76, Karma, WaveDrum GE, Fantom 8 EX
------------------------------------------------------------------
## Please stay safe ##
...and play lots of music Very Happy

------------------------------------------------------------------

NativeAngels · Platinum Member Joined: 22 Mar 2012 Posts: 861

When I transferred the styles from the Pa4x and Pa1000 to my Pa700, I load them into a direct bank to audition, then copy to a user slot. I've yet to transfer the Pa3x styles.
_________________
Gem Wk4, Technics Kn5000, Solton Ms60, Yamaha Psr K1, Korg Pa50sd, Tyros 4, Korg Pa700

duby2 · Posted: Thu Dec 26, 2019 1:21 am Post subject: pa1000

make life easy just download my set.. and you are 98% done...
now you have a pa4x set of styles and the pa4x songbook works fine..
or you can do what I did .. with your pa3x ..
backup all and load them in bank at a time and so on... and you will have a pa3x in side your pa1000... or load my set and you will have a pa4x inside you pa1000 … or do both … have fun … and let us all know how it turn out for you ….
Wink

look at this

http://www.korgforums.com/forum/phpBB2/viewtopic.php?t=113805&highlight=duby2

Keymn · Senior Member Joined: 07 Sep 2015 Posts: 373

I found it time consuming, but since many of the styles are duplicates. I would save a PA3x factory style in a blank user area. Then one by one do a search and if there is a duplicate, delete the user style. And if not found in pa1000 factory, then save in either unprotected Factory or user area empty slot.