View previous topic :: View next topic |
Author |
Message |
Val
Joined: 30 Nov 2006 Posts: 37 Location: Alaska
|
Posted: Tue Jul 08, 2008 7:39 pm Post subject: Arpeggiator pattern settings |
|
|
When I first turn on my TE, the arpeggiator pattern settings are always (A)U466 Dr-Djembalia and (B) U284(m) Dr-Electrobeat. How can I have the pattern default to the pattern I want when I first power up? I have tried to rewrite a new setting from both prog/combi mode and from global mode and also using the write/rec button, as stated in the manual, but when I power up, it always goes back to those settings. I will also point out that I have "auto-arpeggiator" permanently unchecked in Global, since I am morbidly afraid of it accidently going off in live performance! What am I missing or doing wrong here? |
|
Back to top |
|
|
tritex4 Platinum Member
Joined: 14 Feb 2006 Posts: 1278
|
Posted: Tue Jul 08, 2008 7:58 pm Post subject: |
|
|
That should not be happening under normal circumstances.
There is probably something you failed to mention.
The Write function will write to internal memory provided Memory Protect is not selected
for Arpeggio User Pattern.
"auto-arpeggiator" has no bearing on being able to save user changes, so it's Ok to have it On or Off.
What Combination is it?
What do you have hooked up to your Triton? _________________ Regards
TritEx4 |
|
Back to top |
|
|
Val
Joined: 30 Nov 2006 Posts: 37 Location: Alaska
|
Posted: Wed Jul 09, 2008 3:49 am Post subject: |
|
|
Thanks for your reply. Well I sat down with it today and I think I have it figured out. I went and checked "auto-arpeggiator" in global and then went to my combi, M002 Arp Factory, and lo and behold, my chosen settings appeared. Evidently checking auto-arpeggiator does have something to do with those settings being called up. Otherwise they just power up on the one setting and stay there no matter what combi you are in. |
|
Back to top |
|
|
tritex4 Platinum Member
Joined: 14 Feb 2006 Posts: 1278
|
Posted: Wed Jul 09, 2008 5:56 am Post subject: |
|
|
Wow, you're right.
I learned something new today.
With the box unchecked, the Arp. patterns of the next combi will take on the
patterns of the previous combi.
With the boxed checked, the Combi uses the default patterns or the ones the user chooses. _________________ Regards
TritEx4 |
|
Back to top |
|
|
bpoodoo Senior Member
Joined: 27 Dec 2019 Posts: 429 Location: Ding Dong, TX
|
Posted: Mon Feb 03, 2020 10:49 pm Post subject: |
|
|
Wow this is really goofy. Someone at Korg must have misunderstood what was intended when this was implemented.
I thought my Triton Ex was having memory glitches. Preset Combi splits that used to have a nice backing rhythm track now sounded like part of the Psycho soundtrack. The arpeggios seemed to have been scrambled / randomized.
Turns out it was because I had changed Global settings for Auto Arpeggiator to OFF, thinking this was simply to ensure the Arpeggiator state was off by default when you first select a program or combi (same thinking as the OP). But nooooo, with it off it doesn't load the arps assigned to that program or combi at all. If you copy a program/combi to another location, the original arp assignments are lost in the copy, even if you change Auto Arpeggiator back to ON. Weird! Bottom line - keep the Global settings for Auto Arpeggiator ON.
Perhaps Korg will fix this in a future Triton Ex OS update... V1.0.7 _________________ bpoodoo
Triton Extreme 88 w/MOSS
"We all move on, like centuries and doves." |
|
Back to top |
|
|
|