View previous topic :: View next topic |
Author |
Message |
Verver
Joined: 15 May 2020 Posts: 6 Location: West Indies
|
Posted: Fri May 15, 2020 10:03 pm Post subject: Korg DW8000 received ALL but NO sysex |
|
|
Hi all.
First message ever
A little help please. I am on Mac and used to transferring sysex to several synths via SysexLibrairian.
I have already successfully transferred sysex to my DW8000. (IN and OUT).
However for the past 3 days he has received the notes or the program changes via my motu midi card but not the sysex.
This is not a midi channel or cable or interface problem as the other midi data is received correctly.
It’s only sysex that is not received as if the synth was protected (like sysex disable… ???)
Do you have an idea please? I'm totally stuck. |
|
Back to top |
|
|
Verver
Joined: 15 May 2020 Posts: 6 Location: West Indies
|
Posted: Fri May 15, 2020 11:22 pm Post subject: |
|
|
Answer to myself for memory purpose or help someone else :
Parameter 84 need t be set to value 1
Parameter 85 MUST be set to value 2 |
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3776
|
Posted: Sun May 17, 2020 8:35 am Post subject: |
|
|
Thanks for sharing that, and welcome to the forum. SysEx can be more challenging for MIDI interfaces than standard MIDI messages, mostly because of timing and buffering issues. The MOTU MIDI interface is one of the better ones in this regard.
. |
|
Back to top |
|
|
Verver
Joined: 15 May 2020 Posts: 6 Location: West Indies
|
Posted: Sun May 17, 2020 2:12 pm Post subject: |
|
|
welcome to the forum. Thank you ! |
|
Back to top |
|
|
|