Korg Forums Forum Index Korg Forums
A forum for Korg product users and musicians around the world.
Moderated Independently.
Owned by Irish Acts Recording Studio & hosted by KORG USA
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

SCSI to SD Card Solution (Relatively New)

 
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Triton Rack
View previous topic :: View next topic  
Author Message
MartinHines
Platinum Member


Joined: 21 Jan 2003
Posts: 3006
Location: Topeka, KS (USA)

PostPosted: Mon Mar 23, 2020 2:27 am    Post subject: SCSI to SD Card Solution (Relatively New) Reply with quote

I have a Triton-Rack and I recently ordered an external SCSI to SD card device, specifically a

SCSI2SD v5.5 (Pocket Edition)
(approximately $75 U.S.)

I purchased mine from eBay, the seller was Inertial Computing.
https://store.inertialcomputing.com/product-p/scsi2sd-v5.5.htm

[You can also find these on eBay, searching on "SCSI2SD"]

The V5.5 version is designed as a simple external drive that plugs directly into the back of your old machine or sampler. No cables required.
Power is provided by the host itself (in this case the Triton-Rack); it supplies terminator power on pin25 of the DB25 socket.

NOTE: This is the SCSI2SD V5.5 version ONLY; I don't know if the other versions or models work!









The SCSI2SD V5.5 device has three interfaces on it:
-- a microSD card slot
-- a USB 2.0 micro-B port
-- a male DB25 SCSI socket

The SCSI2SD V5.5 device simply plugs in to the 25-pin SCSI port
[You must have the Korg EXB-SCSI expansion device installed in your Triton-Rack or Triton Classic].

I installed a SanDisk microSDHC 32GB card, but the Triton Operating System won't allow you to use/see more than 4GB of storage.

I used the following procedure to set this up:
-- format the microSD card on your computer (I used Windows 10)
-- insert the microSD card into the SCSI2SD V5.5 microSD card slot
-- power off your Triton (Rack or Classic)
-- insert the SCSI2SD V5.5 device into the Triton SCSI port
-- power on the Triton
-- go to DISK Mode and find the SCSI drive. The display will say "Unformatted"
-- use the Triton-Rack (or Triton Classic) to format the SCSI drive (I gave mine the Volume Name of "SCSI_DRIVE")
-- the SCSI drive will be formatted at a size of 4GB
-- the SCSI drive is ready for use

Also, here is the main WIKI page for the SDCSI2SD (there are multiple versions and form factors)
http://www.codesrc.com/mediawiki/index.php/SCSI2SD
_________________
** KORG Product Support Contacts **
(they support BOTH hardware and software)


Korg USA Product support -- https://www.korgusa.com/contactus (For fastest service I would suggest calling them on the phone)

Outside the U.S. contact your Korg Country Distributor -- https://www.korg.com/us/corporate/distributors/
Back to top
View user's profile Send private message Send e-mail
MartinHines
Platinum Member


Joined: 21 Jan 2003
Posts: 3006
Location: Topeka, KS (USA)

PostPosted: Fri Mar 27, 2020 3:40 am    Post subject: Reply with quote

Update:

Using the available SCSI2SD V5 Configuration Utility, I was able to create FOUR SCSI drives on my microSD Card.

Each drive is formatted on the Triton-Rack at 4GB, so I now have 16GB of storage on a single microSD Card.
_________________
** KORG Product Support Contacts **
(they support BOTH hardware and software)


Korg USA Product support -- https://www.korgusa.com/contactus (For fastest service I would suggest calling them on the phone)

Outside the U.S. contact your Korg Country Distributor -- https://www.korg.com/us/corporate/distributors/
Back to top
View user's profile Send private message Send e-mail
martin9791



Joined: 03 Jun 2020
Posts: 6

PostPosted: Wed Jun 03, 2020 2:54 pm    Post subject: ? Reply with quote

Excuse my ignorance. Can i load the sounds of https://www.synthonia.com/marketplace/korg-sounds/triton-karma-series/korg-triton-classic-g-piano-detail on this card and read them with my triton classic? Thank you!
Back to top
View user's profile Send private message Send e-mail Visit poster's website
MartinHines
Platinum Member


Joined: 21 Jan 2003
Posts: 3006
Location: Topeka, KS (USA)

PostPosted: Thu Jul 16, 2020 2:57 am    Post subject: Re: ? Reply with quote

martin9791 wrote:
Excuse my ignorance. Can i load the sounds of https://www.synthonia.com/marketplace/korg-sounds/triton-karma-series/korg-triton-classic-g-piano-detail on this card and read them with my triton classic? Thank you!

Yes, assuming you have at least 64mb is Sample ram installed, which, according to the library you reference, is the minimum ram requirement for that library.

Think of this device as a flash based external hard drive. It can hold anything a SCSI drive could hold.
_________________
** KORG Product Support Contacts **
(they support BOTH hardware and software)


Korg USA Product support -- https://www.korgusa.com/contactus (For fastest service I would suggest calling them on the phone)

Outside the U.S. contact your Korg Country Distributor -- https://www.korg.com/us/corporate/distributors/
Back to top
View user's profile Send private message Send e-mail
michelet
Full Member


Joined: 20 Mar 2006
Posts: 109
Location: Mestre VE - Italy

PostPosted: Thu Nov 12, 2020 7:16 pm    Post subject: Reply with quote

Thanks for your suggestion. I've just bought a Triton Rack without SCSI card and I'm thiniking to follow your directions to add a SCSI mass storage device
_________________
Life without music would be a mistake
CP4 Montage7 Motif XF7 Motif ES Rack+2 PLG150-AN CS6R+PLG150AN&PLG150-VL AN1x WaveState Radias-R microKORG microKORG XL+ 2 Wavestation A/D Triton Rack 03R/W JD-Xi JX-10 MKS-70 Fantom XR+6 SRX JD-990 D-05 JV-2080+8EXP M-GS64 MC-80ex FS1R TG77 MU90R Proteus2000+Virtuoso ROM Morpheus Blofeld Desktop Mininova
nanoPAD2 2 nanoKONTROL2
Back to top
View user's profile Send private message Send e-mail
michelet
Full Member


Joined: 20 Mar 2006
Posts: 109
Location: Mestre VE - Italy

PostPosted: Mon Nov 16, 2020 6:26 pm    Post subject: Reply with quote

MartinHines wrote:
Update:

Using the available SCSI2SD V5 Configuration Utility, I was able to create FOUR SCSI drives on my microSD Card.

Each drive is formatted on the Triton-Rack at 4GB, so I now have 16GB of storage on a single microSD Card.

Would you be so kind to elaborate a little more and explain how you created those 4 partitions? What parameters were used?
Thanks
_________________
Life without music would be a mistake
CP4 Montage7 Motif XF7 Motif ES Rack+2 PLG150-AN CS6R+PLG150AN&PLG150-VL AN1x WaveState Radias-R microKORG microKORG XL+ 2 Wavestation A/D Triton Rack 03R/W JD-Xi JX-10 MKS-70 Fantom XR+6 SRX JD-990 D-05 JV-2080+8EXP M-GS64 MC-80ex FS1R TG77 MU90R Proteus2000+Virtuoso ROM Morpheus Blofeld Desktop Mininova
nanoPAD2 2 nanoKONTROL2
Back to top
View user's profile Send private message Send e-mail
MartinHines
Platinum Member


Joined: 21 Jan 2003
Posts: 3006
Location: Topeka, KS (USA)

PostPosted: Wed Nov 18, 2020 4:33 am    Post subject: Reply with quote

SCSI2SC Device Setup
==================
This Chicken Systems guide might be helpful:
I used this Chicken Systems Help Document as a guide:
http://www.chickensys.com/_docs/scsi2sd_online.pdf

Key constraints:
1) The Triton OS can see SCSI Drives with a maximum size of 4GB
2) The SCSI2SD Utility allows you to create a maximum of 4 SCSI IDs on a single microSD card
Therefore, you get a maximum of 4x4GB = 16GB of storage your Triton can access.

Note: Remember that the Triton Rack/Studio has a maximum Sample RAM of 96MB, meaning you can only load 96MB of data from a SCSI drive into the Triton at one time.

I used two utilities:

1) an SD Card Formatter
I used the SD Association SD Memory Card Formatter
https://www.sdcard.org/downloads/formatter/

2) The SCSI2SD Utility
The CodeSource Wiki page
http://www.codesrc.com/mediawiki/index.php/SCSI2SD
-- "DOWNLOAD" section half-down the page.
-- "downloads for v3/v4/v5"
-- I used the Window 64-bit version
http://www.codesrc.com/files/scsi2sd/latest/windows/64bit/scsi2sd-util.exe


*** PROCESS I FOLLOWED ***
1) Starting with a blank microSD card and a microSD card reader, use an SD Card Formatter to format the card so Windows can see it.
At the end of this process, I had a formatted 32GB card that was visible to Windows (Windows Explorer shows a formatted size of 29.7 GB)

2) I removed the formatted microSD card from the reader, and inserted it into the SCSI2SD v5.5 device, and then connected that device to my computer via a microUSB to USB cable.

3) Create SCSI Partitions Using the SCSI2SD Utility
- General Settings Tab (use default)
- Device 1 Tab: click "Enable SCSI Target", set SCSI ID = 0, set SD card start sector to "AUTO", set Device Size = 4GB
- Device 2 Tab: click "Enable SCSI Target", set SCSI ID = 1, set SD card start sector to "AUTO", set Device Size = 4GB
- Device 3 Tab: click "Enable SCSI Target", set SCSI ID = 2, set SD card start sector to "AUTO", set Device Size = 4GB
- Device 4 Tab: click "Enable SCSI Target", set SCSI ID = 3, set SD card start sector to "AUTO", set Device Size = 4GB

At this point, the utility is set to create 4 SCSI partitions on the microSD drive (SCSI IDs 0, 1, 2, and 3).

Select "File", then "Save to Device". A "Save Complete" window appears. Click "Close", then close the SCSI Utility.

At this point, if you stick the microSD card back into a normal reader, it DOES NOT show any SCSI partitions.

4) Insert the microSD card into the SCSI2SD V5.5 microSD card slot
5) power off your Triton (Rack or Classic)
6) Attach the SCSI2SD V5.5 device into the Triton SCSI port
7) Power on the Triton
8 ) Go to DISK Mode and find the SCSI drive (there should be four drives, SCSI IDs 0, 1, 2, and 3). The display will say "Unformatted"
9) Use the Triton-Rack (or Triton Classic) to format the SCSI drive (I gave mine the Volume Name of "SCSI_DRIVE_1")
-- the SCSI drive will be formatted at a size of 4GB
-- the SCSI drive is ready for use
10) Go to the next SCSI ID, and format the second drive (I gave mine the Volume Name of "SCSI_DRIVE_2")
11) Go to the next SCSI ID, and format the second drive (I gave mine the Volume Name of "SCSI_DRIVE_3")
12) Go to the next SCSI ID, and format the second drive (I gave mine the Volume Name of "SCSI_DRIVE_4")

FINAL TASKS
------------------
At this point, if you put the microSD card into a SD card reader in Windows 10, you should see 5 Drives:
-- SCSI_Drive 1 (4 GB)
-- SCSI_Drive 2 (4 GB)
-- SCSI_Drive 3 (4 GB)
-- SCSI_Drive 4 (4 GB)
-- Other (the remaining 13 GB).
_________________
** KORG Product Support Contacts **
(they support BOTH hardware and software)


Korg USA Product support -- https://www.korgusa.com/contactus (For fastest service I would suggest calling them on the phone)

Outside the U.S. contact your Korg Country Distributor -- https://www.korg.com/us/corporate/distributors/
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Korg Forums Forum Index -> Korg Triton Rack All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group