Korg Forums

Sclr · Junior Member Joined: 14 Jul 2012 Posts: 50

I found this on ikeahacker when i was looking for a stand for the volcas:
http://www.ikeahackers.net/2010/08/laptopbook-stand.html
It was a little too wide and wouldnt work for the volcas but its a solid idea. I used some smaller handles which fit the volcas and allowed some more room so i could stack two volcas on one set of brackets.

It needs another handle or brace for the rear but it works great. I used the 7 1/8th bracket. Fits two volcas nicely. I could see getting a bigger version of the brackets and line three up. I think any bookshelf bracket would work. But this is a cheap solution.
Bracket
http://www.ikea.com/us/en/catalog/products/56696109/
Handle
http://www.ikea.com/us/en/catalog/products/90038541/

gabrielstigmatic · Joined: 20 Feb 2014 Posts: 11

Good idea, man! I might try this out for myself. I have been thinking about viable options for a stand. I can't stand staring straight down like that for long.

elpiulas · Joined: 20 Feb 2013 Posts: 10

Hello, my particular stand version for my 3 volcas.

Total cost: 12 €

Vint4ge · Joined: 12 Jan 2007 Posts: 49 Location: Italy

http://cremacaffedesign.com/projects/hero/

Butterfingersbeck · Joined: 19 Oct 2014 Posts: 27

I find that this works very well for a single Volca if you fold the top section back. Cost - 99p from your local branch of 99p Stores!

_________________
Communication is everything.

Vint4ge · Joined: 12 Jan 2007 Posts: 49 Location: Italy

HERO tabletop stand for small devices
http://cremacaffedesign.com/hero/

Kroy · Joined: 04 May 2013 Posts: 19

All these stands look very funky but I just find Volcas easiest to work with when they're flat.