View previous topic :: View next topic |
Author |
Message |
jredmond
Joined: 19 May 2016 Posts: 1
|
Posted: Thu May 19, 2016 4:14 pm Post subject: Volca Bass Note Priority |
|
|
Is there a way to set the Note priority for the Volca Bass to High Note Priority?
The reason I ask is because I'm chaining the audio of the volca bass to the microbrute and then through the minbrute. My minibrute is set to low note and the microbrute is set to middle note. If I can set the Volca to High note, I will have a 3 note polyphonic synth.
Stacking is cool, I basically have a 5 OSC synth which yields some crazy sounds but I would love to have a polyphonic synth as well. |
|
Back to top |
|
|
spirit68
Joined: 26 Jan 2016 Posts: 34
|
Posted: Mon May 23, 2016 6:50 pm Post subject: |
|
|
might be possible when routing midi through your computer or by splitting your midi keyboard. But volca bass is always playing "last noteOn". |
|
Back to top |
|
|
Stalions
Joined: 03 Jun 2016 Posts: 2
|
Posted: Fri Jun 03, 2016 6:51 am Post subject: |
|
|
This is beyond my knowledge so that I have enough. |
|
Back to top |
|
|
Galo
Joined: 09 Jan 2021 Posts: 1
|
Posted: Sat Jan 09, 2021 2:03 pm Post subject: Note priority: first On |
|
|
There is a tweak to get priority on the first note played. Connect a cable to the sync-in input and leave the other end of the cable either unplugged or plugged to something that is not sending any signal. By doing this, the tempo light should freeze. Then hit the play button. And voila, the first note played will continue playing as long as you keep pressing any key. I use this to harmonize when using an external keyboard as lead. I hope it helps. |
|
Back to top |
|
|
|