Korg Forums

[galambjozsef]

Hello!
Does anyone know more information about this?


KORG Pa4x MCX EDITION V4

https://www.youtube.com/watch?v=mTNxWz2deaM
_________________
SETUP:
- KORG Pa5x (61)
- KORG Pa4x (61) NEXT Plus v4.1.2
- QSC TM-16
- EV EKX-12P - EV EKX-15SP - VoiceSolo FX150
- EV ELX200-10P
- Neumann KMS105 - Rode M2
- https://www.graydove.hu

[Asena]

I Have this, And YES it,s Realy Cool! Better than KORG,s I must say.
_________________
www.globalsound.se

KORG PA 5-X/YAMAHA GENOS 2/YAMAHA A 5000
LIONSTRACK X 76 & GROOVE XR
MEDELI AKX-10




MacbookproM2-Ssd/Logic/Neuman/Kali Audio8/Komplette14SDD/ Apollo Twin/PIONEER XDJ RX 2
LOTS OF SAMPLE SOUNDS!
KorgPaManager V 5

[Rebwar]

what is it? have never heard of it !! what does it have for specification, is there anything more in it?
_________________
korg pa4x oriental 76 key...

[kbrkr]

Unacceptable boot time. What's with the plastic keyboard cover; is that a custom overlay?
_________________
Pa5x, Yamaha Genos, ForeScore

[siebenhirter]

[Caswain]

[Asena]

This Guy who make this do not sell it!

He is just a programmer, The other things Like the Ribbon And B Controller Is For sale , And it,s the best ever made, you can Use upper 1,2,3 At the same time from Breath controller, NOT EVEN YAMAHA can do that!
So he makes things that i really like.
_________________
www.globalsound.se

KORG PA 5-X/YAMAHA GENOS 2/YAMAHA A 5000
LIONSTRACK X 76 & GROOVE XR
MEDELI AKX-10




MacbookproM2-Ssd/Logic/Neuman/Kali Audio8/Komplette14SDD/ Apollo Twin/PIONEER XDJ RX 2
LOTS OF SAMPLE SOUNDS!
KorgPaManager V 5

[siebenhirter]

Hello,
Yamahas BC3a was legendary, but there always alternatives was on the market and there have always been many DIY projects with BreathControls.

Common to all is the basic function to convert the breath pressure signal to MIDI messages. And with each of them - and any other other kind of controller - with a Pa-arranger you can use upper 1,2,3 at the same time with Midi-In-setting to "Acc2".

Overview Breath Controller ---> http://www.digital-notes.de/uebersicht-breath-controller/

*
In order to be able to make the sound of a Pa keyboard more lively with a breath controller, the oscillators of the multisamples must also take into account the use of this controller, regardless of which command it sends.

With CC # 2 most sounds playing "Sustain" or "Legato" for brass and wood base instruments will be used for all kinds of swells, fortepiano,
sforzando etc (Standard AmpSetting:Amp Modulation Veloctiy Intensity -99, AMS Joystick -Y, Intensity +99).

If the converter (of airflow to a signal for CC) is too slow for staccato or repetition, this should be taken into account for blowing noises in the sound editor, because than it is more suitable the breath control control may send CC # 11 (Expression). So for staccato passages, a continuous flow of air and a constant volume are created and notes are triggered via the velocity of the keyboard.
*
With some Breath Controls the airflow can be regulated mechanically using a rotatable valve, so you need less air for a flute than with a tuba.
*
For Strings with Breath Control you can get dynamic sounds with realistic results. Commercial Breath Controls converts input to MIDI-CC values which you then can map to control expression, dynamics, filters and basically anything that you can map MIDI CC to.

In case you plan a DIY-breath-control (maybe with an Arduino) it seems to be better to use the inverse signal for CC#2, to make better use of the dynamic range and thus to achieve gradients up to a complete fade-out of the sounds (setting: Amp Modulation Veloctiy Intensity 0, AMS Joystick -Y, Intensity -99). Otherwise you have to be careful, especially when playing solo strings, that under a certain minimum of air pressure no more values may be sent, so that delicate fade-outs cannot easily be realized.
_________________
kind regards
- siebenhirter, austria -

Interesting facts about styles and stylePlayer functions can be found at http: www.elmarherz.de