Korg electribe 2 - JTAg Connector ?

Discussion relating to the Korg Electribe products.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
Cyano93
Posts: 3
Joined: Sun Aug 15, 2021 10:41 pm

Korg electribe 2 - JTAg Connector ?

Post by Cyano93 »

Does anybody know where the jtag Connector is?
voip
Platinum Member
Posts: 4011
Joined: Thu Nov 27, 2014 2:07 pm

Post by voip »

The Electribe 2 appears to have two JTAG connection points, labelled J9 and J10.

.
Cyano93
Posts: 3
Joined: Sun Aug 15, 2021 10:41 pm

Post by Cyano93 »

I only found 2x J1 and 2x J2 on each boards. Could you maybe take a picture of those connectors ?
voip
Platinum Member
Posts: 4011
Joined: Thu Nov 27, 2014 2:07 pm

Post by voip »

There are no connectors present, but there are holes in the PCB for connectors. See near the left of the image:

http://4.bp.blogspot.com/-kc4eZ1IID-k/V ... G_9288.JPG

.
Cyano93
Posts: 3
Joined: Sun Aug 15, 2021 10:41 pm

Post by Cyano93 »

so i only need 1-5 pin ? or should i split the jtag cable ?
voip
Platinum Member
Posts: 4011
Joined: Thu Nov 27, 2014 2:07 pm

Post by voip »

There may be two separate JTAG chains.

.
russellclarke
Junior Member
Posts: 59
Joined: Fri Jun 07, 2019 12:18 pm

Post by russellclarke »

J9, marked 'AM1802' (the top one in the photo) is for the CPU, this is the one you need. J10, marked 'BF523' is for the DSP.
Post Reply

Return to “Korg Electribe”