View previous topic :: View next topic |
Author |
Message |
Herwiberden
Joined: 20 Sep 2021 Posts: 1
|
Posted: Mon Sep 20, 2021 11:34 pm Post subject: Sustain Pedal problem |
|
|
As I have seen in many posts in the past, my original SV-1 sustain pedal is now only doing half-pedaling. Resetting the SV-1 to factory settings, calibrating the sustain pedal doesn't help at all.
I'm considering to buy a M-Audio SP-2. Would it work with the SV-1?
Or did anyone find any solutions for the sustain pedal problem?
Thanks! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
andresignaciomunoz
Joined: 21 Feb 2022 Posts: 2 Location: Santiago, Chile
|
Posted: Mon Feb 21, 2022 4:51 pm Post subject: Same Problem |
|
|
Hi! I have the same problem. The original sustain pedal was a DS-2H. I bought a DS-1H damper because de DS-2H was no longer available at the store. The new pedal doesn't work either, it just does half-pedaling. Have you found a solution so far? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3777
|
Posted: Mon Feb 21, 2022 7:54 pm Post subject: |
|
|
Try measuring the tip to sleeve resistance using a multimeter, with the pedal pressed fully down. It should probably be somewhere in the range 1000 to 3000 Ohms.
. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
andresignaciomunoz
Joined: 21 Feb 2022 Posts: 2 Location: Santiago, Chile
|
Posted: Thu Feb 24, 2022 2:25 pm Post subject: |
|
|
Thank you very much! I don't have a multimeter right now, but I'll definitely do it as soon as I get one. In the meanwhile I bought an "Alesis SP-2" Universal Sustain Pedal, it has a polarity-change switch, and it has been working perfectly so far. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|