|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
ottonis
Joined: 03 Oct 2021 Posts: 2
|
Posted: Sun Oct 03, 2021 11:39 am Post subject: Havian 30 as master keyboard: no signal from pedal |
|
|
Hi everybody, new forum member here.
I own a Korg Havian 30 and so far I am pretty happy with the sound quality, the arranger styles and with the overall user experience.
However, I would also like to use it as a master midi keyboard and so I connected it via USB to my laptop to use it with Presonus Studio One and virtual instruments plug-ins.
That being said, after a lot of fiddling with the settings and reading the manual I finally managed to get it work.
Unfortunately, when I use the pedal / foot controller that is connected to the Havian, no controller data are transmitted to the laptop/DAW at all.
In global settings/Midi, I tried the "Tablet" mode as well as the "Sequencer" mode and tried to fiddle with Midi out controller settings on Midi out channel 1. Nothing works.
Any ideas what to change or what settings to use to get the controller data from the foot pedal into the DAW?
Thanks in adnvance! |
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3784
|
Posted: Sun Oct 03, 2021 12:17 pm Post subject: |
|
|
Go into the Global MIDI menus and check that the MIDI Out filters are correctly set to allow Foot Pedal messages to be sent.
. |
|
Back to top |
|
|
ottonis
Joined: 03 Oct 2021 Posts: 2
|
Posted: Sun Oct 03, 2021 5:19 pm Post subject: |
|
|
voip wrote: | Go into the Global MIDI menus and check that the MIDI Out filters are correctly set to allow Foot Pedal messages to be sent.
. |
Many thanks. Meawhile, I found out that apparently isn't Korg Havian's fault because keyboard action and pedal controller data are transmitted flawlessly when using my software sampler (IKM Sampletank) in standalone mode.
It doesn't work, however, when using Sampletank within the DAW (Studio One) as a plugin.
So, in my understanding, the problem has to be related to the settings inside the DAW.
Thanks again for your swift reply! |
|
Back to top |
|
|
jmasc50
Joined: 24 Jun 2012 Posts: 4
|
Posted: Sun Jun 05, 2022 7:38 pm Post subject: |
|
|
I see from your post (Oct 2021) that you are successfully connecting your Havian 30 to your computer. Are you using the DEVICE MIDI port out? Was there anything you had to do to activate or enable the USB DEVICE port?
I am trying to connect my Havian 30 to a USB MIDI Host device, which receives the MIDI info stream and sends it out a 5 pin MIDI out port which I then connect to a KORG track mount synth. I can't get the Havian to send anything out the DEVICE MIDI port, even though I have created a Global MIDI out preset.
Do you have any helpful ideas for me?
Thanks, I greatly appreciate any help that you can provide. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|