|
Korg Forums A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio & hosted by KORG USA
|
View previous topic :: View next topic |
Author |
Message |
MichaelMcG
Joined: 19 Jan 2020 Posts: 4
|
|
Back to top |
|
|
samriccijr Full Member
Joined: 01 Jan 2004 Posts: 114 Location: usa nj
|
Posted: Tue Dec 20, 2022 8:44 pm Post subject: |
|
|
Hi MichaelMcG!
Yes, the ZULU SCSI MINI should connect directly to the DB25 on the EXB SCSI. It looks like 5V power goes to a USB port. There should be dip switches to set the SCSI ID.
https://samplerzone.com/collections/zuluscsi/products/zuluscsi-mini-v1-0-scsi-sd-drive
Back in the Trinity days I loaded PBS TRI samples and PCGs using a
ACARD 7720U SCSI to IDE
Generic IDE to CF adapter
2Gig CF card
5V Power pigtail
All of this was mounted in an old Apple SCSI hard drive case. The SCSI cable was heavier than the enclosure and the parts......
I installed a similar kit in a Triton Rack. I had to buy a short DB25 to IDC 50 pin ribbon connector and a DB25 gender changer. I built a hard drive pigtail to power everything from the Floppy plug. I made an adapter to move the SCSI port in about 1 inch so all the cables would be contained within the Triton Rack. The only drawback was that I had to open the case to access the CF card.
I have since moved my samples to Kontakt on the Mac, SFZ on a Zynthian, and Soundfonts on my phone.
But to this day I still gig with Triton sounds in my Karma keyboard!
Hope this helps!
Sam in NJ USA |
|
Back to top |
|
|
MichaelMcG
Joined: 19 Jan 2020 Posts: 4
|
Posted: Wed Dec 28, 2022 3:51 pm Post subject: |
|
|
samriccijr wrote: |
I installed a similar kit in a Triton Rack. I had to buy a short DB25 to IDC 50 pin ribbon connector and a DB25 gender changer. I built a hard drive pigtail to power everything from the Floppy plug. I made an adapter to move the SCSI port in about 1 inch so all the cables would be contained within the Triton Rack. The only drawback was that I had to open the case to access the CF card.
I have since moved my samples to Kontakt on the Mac, SFZ on a Zynthian, and Soundfonts on my phone.
But to this day I still gig with Triton sounds in my Karma keyboard!
Hope this helps!
Sam in NJ USA |
Hi Sam, thanks for replying.
Yes, that is the sort of thing I would like to do. I would imagine spacers similar to those used to install pc motherboards etc, would suffice for moving the card back. The only issue would be the length of the cable from the exb-scsi card to Triton motherboard. So If I could get a 25 pin dsub male to female cable it should be possible with this adapter? |
|
Back to top |
|
|
samriccijr Full Member
Joined: 01 Jan 2004 Posts: 114 Location: usa nj
|
Posted: Wed Dec 28, 2022 4:40 pm Post subject: |
|
|
Yes, a straight thru db25 M-F (not a null modem) should work.
Sam |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|