View previous topic :: View next topic |
Author |
Message |
jeffkluth
Joined: 14 Sep 2009 Posts: 30
|
Posted: Wed Feb 01, 2023 10:19 pm Post subject: Midi message for Sequencer start / stop |
|
|
Im trying to see if I can use my iRIG Blueboard to start and stop the sequencer. I think its possible if I know the midi messages for that function. Has anyone tried this ? THANKS |
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3776
|
Posted: Wed Feb 01, 2023 11:01 pm Post subject: |
|
|
Try sending CC#45 to the Nautilus.
. |
|
Back to top |
|
|
jeffkluth
Joined: 14 Sep 2009 Posts: 30
|
Posted: Wed Feb 01, 2023 11:17 pm Post subject: |
|
|
thanks my app wants a controller number and a value - do you know what I should put there ? |
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3776
|
Posted: Thu Feb 02, 2023 9:33 am Post subject: |
|
|
Try using values below 63 for off, and up to 127 for on. If that doesn't work, as an alternative, try sending SysEx messages: FA to start, FC to stop, and FB to continue.
. |
|
Back to top |
|
|
jeffkluth
Joined: 14 Sep 2009 Posts: 30
|
Posted: Fri Feb 03, 2023 11:57 pm Post subject: sequencer mode working but sequencer not |
|
|
So I was able to come up with the SYSEX message to change modes between Combi and Sequencer mode but so far no luck on Sequencer Start. The syses I captured when I started it manually was
F0 42 32 00 01 5D 6D 0A 00 00 05 00 00 00 00 F7
but when I send it nothing is happening.
The sysex that changes to sequencer mode that works is
F0 42 32 00 01 5D 4E 04 F7 |
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3776
|
|
Back to top |
|
|
jeffkluth
Joined: 14 Sep 2009 Posts: 30
|
Posted: Mon Feb 06, 2023 4:26 pm Post subject: Start sequencer from external device |
|
|
Found it. You have to set the Midi Set up/Midi clock to either to External Midi or Auto Midi and then it will recognize the Start Sequencer command |
|
Back to top |
|
|
voip Platinum Member
Joined: 27 Nov 2014 Posts: 3776
|
Posted: Tue Feb 07, 2023 7:37 pm Post subject: |
|
|
Excellent. Glad it works :-)
. |
|
Back to top |
|
|
|