View previous topic :: View next topic |
Author |
Message |
korg_nikos Full Member
Joined: 11 Jun 2006 Posts: 241 Location: Athens Greece
|
Posted: Mon Jun 21, 2010 10:13 am Post subject: Trinity Pro: Error Message while turning the instrument on |
|
|
Hi to all,
A friend of mine deals with some problems with his Trinity Pro. What he gets each time he turns the instrument on is one of the following cases.
1. Totally Blank Screen (Only blue lighting with no messages at all)
2. "SRAM Initialize" message without holding Enter + 0 during turn on.
3. The following Error Message (check photos below) is also displayed
Does anyboady have a clue about what those Error Codes correspond to? Do you think that this instrument was switched off or lost its power while OS Update?
Thanks in advance |
|
Back to top |
|
|
korg_nikos Full Member
Joined: 11 Jun 2006 Posts: 241 Location: Athens Greece
|
Posted: Wed Jun 23, 2010 7:51 am Post subject: |
|
|
Any thoughts? |
|
Back to top |
|
|
blinkofanI Platinum Member
Joined: 17 May 2002 Posts: 776 Location: Quebec, Canada
|
Posted: Thu Jul 08, 2010 4:10 am Post subject: |
|
|
Hi
I remember having similar message once when i had downloaded a sound bank from the internet and loaded it in the Trinity. What i would do is reinstall the OS. If your friend had custom sounds and didn't do a backup...well, sorry!
Blink _________________ System 1: Korg Z1EX with UA Apollo Twin X and M1 Macbook Air. System 2: Korg Trinity V3 with HDR, DSI Mopho DT, Korg 01/W Pro, Soundcraft NotePad-8FX. |
|
Back to top |
|
|
korg_nikos Full Member
Joined: 11 Jun 2006 Posts: 241 Location: Athens Greece
|
Posted: Thu Jul 08, 2010 5:50 am Post subject: |
|
|
Thanks for your reply.
We have already tried to Load OS (ENTER+RESET) on boot up but the instrument does not respond. It doesn't even ask for disk 1.
We tried to initialize it with ENTER + 0. Also nothing happens.
We have also tried to Enter Test Mode (ENTER +5). Same result...the instrument stays frozen to its initial error display above |
|
Back to top |
|
|
luckyluca
Joined: 31 Jul 2016 Posts: 41
|
Posted: Tue Nov 28, 2023 8:22 am Post subject: |
|
|
korg_nikos wrote: | Thanks for your reply.
We have already tried to Load OS (ENTER+RESET) on boot up but the instrument does not respond. It doesn't even ask for disk 1.
We tried to initialize it with ENTER + 0. Also nothing happens.
We have also tried to Enter Test Mode (ENTER +5). Same result...the instrument stays frozen to its initial error display above |
A rather old post I know
Did you ever resolve the blank screen even when pressing enter-reset,0,5?
I’m having the exact same issue on my trinity pro
best |
|
Back to top |
|
|
|